There are several specific safety signs on this work tool. The exact location of the hazards and the description of the hazards are reviewed in this section. Please become familiarized with all safety signs.
Make sure that all of the safety signs are legible. Clean the safety signs or replace the safety signs if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the safety signs, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety signs. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety sign. Loose adhesive will allow the safety sign to fall. Replace any safety sign that is damaged or missing. If a safety sign is attached to a part that is replaced, install a safety sign on the replacement part. Verachtert or your dealer can provide new safety signs.
 | |
| Illustration 1 | g00819682 |
Typical location of the safety signs and labels on the quick coupler | |
Crush Point and Safe Distance
 | |
| Illustration 2 | g00819604 |
(1) There is no clearance in this area for a person during operation. Stay clear of this area during operation. Stay clear of the quick coupler for a safe distance.
Read the OMM
 | |
| Illustration 3 | g00819597 |
(2) Do not operate the Work Tool unless you read the instructions and warnings Operation and Maintenance Manual. Do not operate the Work Tool unless you understand the instructions and the warnings in the Operation and Maintenance Manual. Failure to follow the warnings could result in personal injury or death. Consult Verachtert or your dealer for replacement manuals. Proper care is your responsibility.