M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Main Menu Caterpillar


Main Menu
`

The main menu allows the operator to view information concerning the machine.




Illustration 1g00677105

(1) Up key

(2) Right key

(3) Set key

(4) Menu key

(5) Left key

(6) Down key

(7) Cancel key

(8) OK key

Press menu key (4) when the default display is active.

Table 1
           
    "MAIN MENU"        
    "QUICK COUPLER"        
    "PREFERENCES"        
    "TOOL SELECT"        
           

After the menu key is pressed, the following five options are displayed: "QUICK COUPLER", "PREFERENCES", "TOOL SELECT", "FILTER/FLUID HOURS" and "SERVICE OPTIONS". Press up key (1) or press down key (6) in order to highlight the desired menu. Press OK key (8). Press the cancel key in order to exit the main menu and return to the default display.

Note: If no keys are pressed within 30 seconds, the main menu will be cancelled and default display will be shown.

"QUICK COUPLER" - This menu allows the operator to lock the quick coupler. This menu also allows the operator to unlock the quick coupler. Refer to Operation and Maintenance Manual, "Quick Coupler" for further information.

"PREFERENCES" - This menu allows the operator to customize the display. The operator can change the following items: language, clock, contrast and brightness. Refer to the following stories for more information.

  • Operation and Maintenance Manual, "Language Selection"

  • Operation and Maintenance Manual, "Clock Adjustment"

  • Operation and Maintenance Manual, "Display Adjustment"

"TOOL SELECT" - This menu allows the operator to select the proper predefined tool. Refer to Operation and Maintenance Manual, "Tool Selection" for further information.

"FILTER/FLUID HOURS" - This menu allows the operator or the service technician to view the current service hours and the recommended service intervals on a variety of maintenance items. Refer to Operation and Maintenance Manual, "Filter/Fluid Hours" for further information.

"SERVICE OPTIONS" - This menu allows the operator to view the machine information and the working hours. This menu also allows the operator to set the indicator for the tool. Refer to Operation and Maintenance Manual, "Machine Information" for further information.

Information System:

3500B Engines for 5130B and 5230B Excavators Analog Sensor Supply
312C Excavator 3064 Engine Supplement Fuel Priming Pump - Remove and Install
W345B Series II Material Handler Hydraulic System Control Valve (Stick Lowering)
312C Excavator 3064 Engine Supplement Air Conditioner Dryer - Remove and Install
5230B Excavator Hydraulic System Relief Valve (Main) - Test
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Language Selection
W345B Series II Material Handler Hydraulic System Stick Hydraulic System
305 CR Mini Hydraulic Excavator Monitoring System
312C Excavator 3064 Engine Supplement Water Separator - Remove and Install
3500B Engines for 5130B and 5230B Excavators Engine Misfires, Runs Rough or Is Unstable
Horizontal Pin Lock Series PW Quick Coupler Safety Messages
3500B Engines for 5130B and 5230B Excavators Electrical Connectors and Functions
312C Excavator 3064 Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Clock Adjustment
3500B Engines for 5130B and 5230B Excavators CAT Data Link
HDB Series and M1 Series Heavy Duty Brushless Alternators Component Description
3500B Engines for 5130B and 5230B Excavators Digital Sensor Supply
5230B Excavator Machine Systems Gear Pump (Pump Drive Lubrication) - Disassemble
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Filter/Fluid Hours
3500B Engines Electronic Circuits
M325B Material Handler Machine Systems Stick Cylinder - Disassemble
M325B Material Handler Machine Systems Stick Cylinder - Assemble
M325B Material Handler Machine Systems Boom Cylinder - Disassemble
5230B Excavator Machine Systems Gear Pump (Pump Drive Lubrication) - Assemble