M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Clock Adjustment Caterpillar


Clock Adjustment
`



    Illustration 1g00677105

    (1) Up key

    (2) Right key

    (3) Set key

    (4) Menu key

    (5) Left key

    (6) Down key

    (7) Cancel key

    (8) OK key

  1. Press menu key (4). The "MAIN MENU" screen will appear.

    Table 1
               
        "MAIN MENU"        
        QUICK COUPLER        
        "PREFERENCES"        
        "TOOL SELECT"        
               

    Table 2
               
        MAIN MENU        
        QUICK COUPLER        
        "PREFERENCES"        
        "TOOL SELECT"        
               

    Table 3
               
        "PREFERENCES"        
        "SELECT LANGUAGE"        
        "ADJUST CLOCK"        
        "ADJUST DISPLAY"        
               

  1. Press up key (1) or press down key (6) in order to highlight the "PREFERENCES" menu. Press OK key (8). The "PREFERENCES" menu will appear.

    Table 4
               
        "PREFERENCES"        
        "SELECT LANGUAGE"        
        "ADJUST CLOCK"        
        "ADJUST DISPLAY"        
               

    Table 5
               
        "ADJUST CLOCK"        
        "00:00"        
               
        ":H/M" ":+/-"        
               

  1. Press up key (1) or press down key (6) in order to highlight the "ADJUST CLOCK" menu. Press OK key (8). The "ADJUST CLOCK" menu will appear.

  1. Press left key (5) or press right key (2) in order to select the hour or the minute. Press up key (1) in order to increase the number. Press down key (6) in order to decrease the number.

  1. When the clock is set to the desired time, press set key (3) .

    Note: Press cancel key (7) in order to return to the "PREFERENCES" menu.

Information System:

312C Excavator 3064 Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Main Menu
3500B Engines for 5130B and 5230B Excavators Analog Sensor Supply
312C Excavator 3064 Engine Supplement Fuel Priming Pump - Remove and Install
W345B Series II Material Handler Hydraulic System Control Valve (Stick Lowering)
312C Excavator 3064 Engine Supplement Air Conditioner Dryer - Remove and Install
5230B Excavator Hydraulic System Relief Valve (Main) - Test
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Language Selection
W345B Series II Material Handler Hydraulic System Stick Hydraulic System
305 CR Mini Hydraulic Excavator Monitoring System
312C Excavator 3064 Engine Supplement Water Separator - Remove and Install
3500B Engines for 5130B and 5230B Excavators Engine Misfires, Runs Rough or Is Unstable
3500B Engines for 5130B and 5230B Excavators CAT Data Link
HDB Series and M1 Series Heavy Duty Brushless Alternators Component Description
3500B Engines for 5130B and 5230B Excavators Digital Sensor Supply
5230B Excavator Machine Systems Gear Pump (Pump Drive Lubrication) - Disassemble
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Filter/Fluid Hours
3500B Engines Electronic Circuits
M325B Material Handler Machine Systems Stick Cylinder - Disassemble
M325B Material Handler Machine Systems Stick Cylinder - Assemble
M325B Material Handler Machine Systems Boom Cylinder - Disassemble
5230B Excavator Machine Systems Gear Pump (Pump Drive Lubrication) - Assemble
W345B Series II Material Handler Hydraulic System Control Valve (Boom Lowering)
M325B Material Handler Machine Systems Boom Cylinder - Assemble