Filter/Fluid Hours
`
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
[SEBU7430]
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Clock Adjustment
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Boom/Stick/Bucket Combinations
OPERATOR STATION
MONITOR GP
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Language Selection
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Main Menu
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Clock Adjustment
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Filter/Fluid Hours
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Monitoring System
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Display Adjustment
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Machine Information
This menu allows the operator and the service technician to view the accumulated service hours and the recommended change intervals for the following filters and lubricants:
- Engine oil
- Engine oil filter
- Engine coolant
- Fuel filter/water separator
- Fuel filter
- Hydraulic pilot oil filter
- Return hydraulic oil filter
- Hydraulic oil
- Press menu key (4). The screen for the MAIN MENU will appear.
Show/hide table
Table 1 MAIN MENU QUICK COUPLER PREFERENCES TOOL SELECT Show/hide tableTable 2 MAIN MENU PREFERENCES TOOL SELECT Show/hide tableTable 3 FILTER/FLUID HOURS ENGINE OIL SERVICE HOURS 60/ 500HRS
Show/hide table
 | |
| Illustration 1 | g00677105 |
(1) Up key (2) Right key (3) Set key (4) Menu key (5) Left key (6) Down key (7) Cancel key (8) OK key | |
- Press up key (1) or press down key (6) in order to highlight the FILTER/FLUID HOURS menu. Press OK key (8). The FILTER/FLUID HOURS menu will appear.
- Press right key (2) or left key (5) in order to scroll through the available service items.
Note: Press cancel key (7) in order to return to the MAIN MENU.
The service hours cannot be reset by using this menu.
Information System:
5230B Excavator Machine Systems
Gear Pump (Pump Drive Lubrication) - Disassemble
3500B Engines for 5130B and 5230B Excavators
Digital Sensor Supply
HDB Series and M1 Series Heavy Duty Brushless Alternators
Component Description
3500B Engines for 5130B and 5230B Excavators
CAT Data Link
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Clock Adjustment
312C Excavator 3064 Engine Supplement
Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Main Menu
3500B Engines for 5130B and 5230B Excavators
Analog Sensor Supply
312C Excavator 3064 Engine Supplement
Fuel Priming Pump - Remove and Install
W345B Series II Material Handler Hydraulic System
Control Valve (Stick Lowering)
312C Excavator 3064 Engine Supplement
Air Conditioner Dryer - Remove and Install
5230B Excavator Hydraulic System
Relief Valve (Main) - Test
3500B Engines
Electronic Circuits
M325B Material Handler Machine Systems
Stick Cylinder - Disassemble
M325B Material Handler Machine Systems
Stick Cylinder - Assemble
M325B Material Handler Machine Systems
Boom Cylinder - Disassemble
5230B Excavator Machine Systems
Gear Pump (Pump Drive Lubrication) - Assemble
W345B Series II Material Handler Hydraulic System
Control Valve (Boom Lowering)
M325B Material Handler Machine Systems
Boom Cylinder - Assemble
305 CR Mini Hydraulic Excavator
Light Switches
325C L and 325C LN Excavator Lifting Capacities
Lifting Capacities - 325C Excavator
3500B Engines for 5130B and 5230B Excavators
Electrical Power Supply
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Boom/Stick/Bucket Combinations
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Plate Locations and Film Locations