325C L and 325C LN Excavator Lifting Capacities Lifting Capacities - 325C Excavator Caterpillar


Lifting Capacities - 325C Excavator
`
1.1. 325C L with 800 m Track Shoes
2.1. 325C LN With 600 mm Track Shoes



Illustration 1g00586902

(H) Height

(F) Lifting capacity over the front or rear of the machine

(S) Lifting capacity over the side of the machine

(R) Reach

325C L with 800 m Track Shoes

Table 1
    325C Excavator, 5.55 m boom, 2.0 m stick, 1.7 m3 bucket, and 800 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     7.5 m                            
6.0 m                 7890 (2)     6710    
4.5 m         10430 (2)     8510 (2)     6580    
3.0 m         12890 (2)     10070     9570 (2)     6280    
1.5 m         14740 (2)     9340     9550     5960    
0.0 m         15200 (2)     9050     9330     5770    
-1.5 m         15200 (2)     9050     9330     5740    
-3.0 m 16570 (2)     12240 (2)     9330            
    325C Excavator, 5.55 m boom, 2.0 m stick, 1.7 m3 bucket, and 800 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     7.5 m     kg             4860 (2)     6.78    
6.0 m kg             4650 (2)     4160     7.95    
4.5 m kg             4690 (2)     3450     8.59    
3.0 m kg     6640     4170     4920 (2)     3150     8.84    
1.5 m kg     6520     4070     5060     3120     8.76    
0.0 m kg             5470     3380     8.33    
-1.5 m kg             4000 (2)     7.5    
-3.0m kg                        
( 1 ) Lift capacities are based on"SAE J1097"and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 2
    325C Excavator, 5.55 m boom, 2.5 m stick, 1.7 m3 bucket, and 800 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) () S     (F)     (S)     (F)     (S)    
(H)     7.5 m                            
6.0 m                 7120 (2)     6850    
4.5 m         9410 (2)     7870 (2)     6670    
3.0 m         11980 (2)     10300     9030 (2)     6340    
1.5 m         14190 (2)     9510     9590     5990    
0.0 m         15140 (2)     9090     9320     5750    
-1.5 m 13870 (2)     13860 (2)     14820 (2)     9000     9220     5660    
-3.0 m 18570 (2)
   
13170 (2)     9170     9340     5760    
-4.5 m         9070 (2)            
    325C Excavator, 5.55 m boom, 2.0 m stick, 1.7 m3 bucket, and 800 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     7.5 m             3710 (2)     7.40    
6.0 m         3550 (2)     8.46    
4.5 m 6760 (2)     4310     3580 (2)     3110     9.05    
3.0 m 6680     4210     3760 (2)     2840 (2)     9.29    
1.5 m 6520     4060     4110 (2)     2810     9.21    
0.0 m 6410     3950     4680 (2)     3010     8.82    
-1.5 m         4790     3570     8.05    
-3.0m                    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 3
    325C L Excavator, 6.15 m reach boom, 2.0 m stick, 1.7 m3 bucket, and 800 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     7.5 m                     7080 (2)     6650    
6.0 m                 7200 (2)     6710    
4.5 m         10460 (2)     8110 (2)     6450    
3.0 m                 9280 (2)     6050    
1.5 m                 9260     5710    
0.0 m         14700 (2)     8610     9040     5510    
-1.5 m         14110 (2)     8700     9010     5490    
- 3.0 m 16270 (2)
   
12510 (2)     8960     9180     5630    
- 4.5 m         9100 (2)            
    325C L Excavator, 6.15 m reach boom, 2.0 m stick, 1.7 m3 bucket, and 800 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     7.5 m             4830 (2)     4560     7.64    
6.0 m         4700 (2)     3440     8.66    
4.5 m 6700 (2)     4230     4700 (2)     2910     9.23    
3.0 m 6560     4100     4390 (2)     2660     9.46    
1.5 m 6390     3940     4370 (2)     2640     9.39    
0.0 m 6280     3850     4680 (2)     2830     9.0    
- 1.5 m 6290 (2)     3850     4710     3350     8.25    
- 3.0 m                    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 4
    325C L Excavator, 6.15 m reach boom, 2.65 m HD stick, 1.35 m3 bucket, and 800 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     7.5 m                            
6.0 m                        
4.5 m         9650 (2)     7830 (2)     6960    
3.0 m         12450 (2)     10320     9140 (2)     6580    
1.5 m         14630 (2)     9570     9780     6220    
0.0 m         15450 (2)     9240     9510     5980    
-1.5 m 8750 (2)     15220 (2)     9180     9400     5880    
-3.0 m 15830 (2)
   
14040 (2)     9310     9460     5930    
-4.5 m 15590 (2)     11490 (2)     9610     8120 (2)     6170    
    325C L Excavator, 6.15 m reach boom, 2.65 m HD stick, 1.35 m3 bucket, and 800 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     7.5 m             3470 (2)     8.37    
6.0 m 6550 (2)     4800     3350 (2)     9.28    
4.5 m 6920 (2)     4720     3360 (2)     2950     9.81    
3.0 m 7010     4550     3480 (2)     2750     10.02    
1.5 m 6810     4370     3720 (2)     2720     9.96    
0.0 m 6670     4240     4120 (2)     2860     9.6    
-1.5 m 6610     4190     4760     3250     8.93    
-3.0m         2960 (2)     7.83    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 5
    325C L Excavator, 6.15 m reach boom, 3.2 m reach stick, 1.35 m3 bucket, and 800 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
1.5 m 3.0 m     4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)     (F)     (S)    
(H)     9.0 m                                    
7.5 m                                
6.0 m                                
4.5 m                         7120 (2)     7070    
3.0 m                 11320 (2)     10600     8500 (2)     6670    
1.5 m                 13840 (2)     9750     9840 (2)     6270    
0.0 m         4450 (2)     15170 (2)     9270     9520     5970    
-1.5 m 5130 (2)     8520 (2)     15320     9120     9350     5830    
-3.0 m 9480 (2)     13790 (2)     14580 (2)     9170     9340     5820    
-4.5 m         17700 (2)     17710 (2)     12620 (2)     9400     9230 (2)     5970    
    325C L Excavator, 6.15 m reach boom, 3.2 m reach stick, 1.35 m3 bucket, and 800 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m 9.0 m     Maximum    
(F) (S)     (F)     (S)     (F)     (S)     m    
(H)     9.0 m                     2940 (2)     7.64    
7.5 m 4120 (2)             2690 (2)     8.98    
6.0 m 5910 (2)     4880             2600 (2)     9.82    
4.5 m 6390 (2)     4770     4100 (2)     3310     2620 (2)     10.31    
3.0 m 7050     4580     5110     3260     2720     2480     10.52    
1.5 m 6820     4370     5010     3170     2920 (2)     2450     10.46    
0.0 m 6640     4210     4930     3090     3250 (2)     2560     10.12    
-1.5 m 6540     4120             3770 (2)     2870     9.49    
-3.0m 6560     4130             3940 (2)     3520     8.48    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 6
    325C L Excavator, 6.15 m reach boom, 3.2 m HD reach stick, 1.35 m3 bucket, and 800 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
1.5 m 3.0 m     4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)     (F)     (S)    
(H)     9.0 m                                    
7.5 m                                
6.0 m                                
4.5 m                         7060 (2)     7020    
3.0 m                 11240 (2)     10530     8430 (2)     6610    
1.5 m                 13750 (2)     9670     9760 (2)     6200    
0.0 m         4420 (2)     15070     9180     9440     5900    
-1.5 m 5100 (2)     8490 (2)     15220     9020     9280     5750    
-3.0 m 9450 (2)     13760 (2)     14480 (2)     9080     9270     5750    
-4.5 m         17590 (2)     12530 (2)     9310     9160 (2)     5900    
    325C L Excavator, 6.15 m reach boom, 3.2 m HD reach stick, 1.35 m3 bucket, and 800 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m 9.0 m     Maximum    
(F) (S)     (F)     (S)     (F)     (S)     m    
(H)     9.0 m                     2920 (2)     7.64    
7.5 m 4090 (2)             2660 (2)     8.98    
6.0 m 5850 (2)     4830             2570 (2)     9.82    
4.5 m 6330 (2)     4720     4060 (2)     3260     2590 (2)     10.31    
3.0 m 6990     4520     5060     3200     2690 (2)     2440     10.52    
1.5 m 6760     4310     4960     3110     2890 (2)     2400     10.46    
0.0 m 6580     4150     4880     3030     3220 (2)     2510     10.12    
-1.5 m 6480     4060             3750 (2)     2820     9.49    
-3.0m 6500     4070             3930 (2)     3470     8.48    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 7
    325C LN Excavator, 5.85 m VA boom, 2.0 m stick, 1.7 m3 bucket, and 800 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     9.0 m                            
7.5 m         9200 (2)            
6.0 m 10610 (2)     9860 (2)     7340 (2)     6600    
4.5 m         12010 (2)     10550     7990 (2)     6360    
3.0 m         14800 (2)     9460     9080 (2)     5960    
1.5 m                 9240     5600    
0.0 m         12780 (2)     8490     9020     5410    
-1.5 m     9990 (2)     8590     7920 (2)     5410    
    325C LN Excavator, 5.85 m VA boom, 2.0 m stick, 1.7 m3 bucket, and 800 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     9.0 m             5570 (2)     5.44    
7.5 m         4880 (2)     4790     7.37    
6.0 m         4670 (2)     3530     8.44    
4.5 m 5940 (2)     4080     4410 (2)     2940     9.03    
3.0 m 6260 (2)     3980     4370 (2)     2690     9.28    
1.5 m 6340     3840     4500     2670     9.20    
0.0 m 6250     3760     4670     2890     8.81    
-1.5 m                    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 8
    325C LN Excavator, 5.85 m VA boom, 2.5 m stick, 1.7 m3 bucket, and 800 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
4.5 m 6.0 m    
(F) (S)     (F)     (S)    
(H)     9.0 m     7730 (2)            
7.5 m 8830 (2)     6720 (2)     6710    
6.0 m 8680 (2)     6840 (2)     6740    
4.5 m 10850 (2)     10830     7840 (2)     6470    
3.0 m 14420 (2)     9760     8540 (2)     6040    
1.5 m 14830 (2)     8890     9290     5640    
0.0 m 13650 (2)     8520     9000     5390    
-1.5 m 11240 (2)     8510     8630 (2)     5320    
-3.0 m 7560 (2)     5740 (2)     5450    
    325C LN Excavator, 5.85 m VA boom, 2.5 m stick, 1.7 m3 bucket, and 800 mm track shoes
All lifting capacities are in kilograms.    
        (R)        
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     9.0 m             4220 (2)     6.32    
7.5 m         3730 (2)     7.98    
6.0 m 5450 (2)     4170     3560 (2)     3120     8.95    
4.5 m 5590 (2)     4170     3560 (2)     2630     9.51    
3.0 m 5950     4010     3690 (2)     2410     9.74    
1.5 m 6330     3830     3950 (2)     2380     9.67    
0.0 m 6200     3700     4360     2550     9.30    
-1.5 m 5960 (2)     3690     3400 (2)     3020     8.58    
-3.0 m                    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

325C LN With 600 mm Track Shoes

Table 9
    325C LN Excavator, 5.55 m boom, 2.0 m stick, 1.7 m3 bucket, and 600 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     7.5 m                            
6.0 m                 7890 (2)     5900    
4.5 m         10430 (2)     9610     8510 (2)     5770    
3.0 m         12890 (2)     8760     9540 (2)     5470    
1.5 m         14740 (2)     8060     9180     5160    
0.0 m         14730     7780     8970     4970    
-1.5 m 15180 (2)
   
14440 (2)     7800     8940     4940    
-3.0 m 16570 (2)
   
16430     12240 (2)     8050            
    325C LN Excavator, 5.55 m boom, 2.0 m stick, 1.7 m3 bucket, and 600 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     7.5 m             4860 (2)     6.78    
6.0 m         4650 (2)     3620     7.95    
4.5 m         4690 (2)     2970     8.59    
3.0 m 6370     3590     4850 (2)     2690     8.84    
1.5 m 6250     3490     4840     2650     8.76    
0.0 m         5230     2880     8.33    
-1.5 m         4000 (2)     3530     7.5    
-3.0m                    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 10
    325C LN Excavator, 5.55 m boom, 2.50 m stick, 1.7 m3 bucket, and 600 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     7.5 m                            
6.0 m                 7120 (2)     6020    
4.5 m         9410 (2)     7870 (2)     5850    
3.0 m         11980 (2)     8990     9030 (2)     5530    
1.5 m         14190 (2)     8220     9220     5180    
0.0 m         14790 (2)     7810     8950     4950    
-1.5 m 13870 (2)     13860 (2)     14690 (2)     7730     8850     4860    
-3.0 m 18570 (2)     16170     13170 (2)     7890     8970     4960    
-4.5 m         9070 (2)     8340            
    325C LN Excavator, 5.55 m boom, 2.50 m stick, 1.7 m3 bucket, and 600 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     7.5 m             3710 (2)     7.40    
6.0 m         3550 (2)     3200     8.46    
4.5 m 6520     3720     3580 (2)     2660     9.05    
3.0 m 6410     3620     4920 (2)     2410     9.29    
1.5 m 6250     3480     4110     2370     9.21    
0.0 m 6140     3370     4680     2540     8.82    
-1.5 m         4790 (2)     3040     8.05    
-3.0m                    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 11
    325C LN Excavator, 6.15 m reach boom, 2.0 m stick, 1.7 m3 bucket, and 600 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     7.5 m                     7080 (2)     5830    
6.0 m                 7200 (2)     5890    
4.5 m         10460 (2)     9220     8110 (2)     5630    
3.0 m                 9280 (2)     5250    
1.5 m                 8890     4910    
0.0 m         14200 (2)     7350     8670     4720    
-1.5 m         14110 (2)     7440     8650     4690    
-3.0 m 16270 (2)     15900     12510 (2)     7690     8810     4840    
-4.5 m         9100 (2)     8180            
    325C LN Excavator, 6.15 m reach boom, 2.5 m stick, 1.7 m3 bucket, and 600 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     7.5 m             4830 (2)    
3990    
7.64    
6.0 m         4700 (2)     2960     8.66    
4.5 m 6430     3650     4500 (2)     2470     9.23    
3.0 m 6290     3520     4190     2240     9.46    
1.5 m 6120     3370     4170     2210     9.39    
0.0 m 6010     3270     4460     2380     9.0    
-1.5 m 6020     3280     4710 (2)     2840     8.25    
-3.0m                    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 12
    325C LN Excavator, 6.15 m reach boom, 2.65 m reach stick, 1.35 m3 bucket, and 600 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     7.5 m                            
6.0 m                        
4.5 m         9650 (2)     7830 (2)     5630    
3.0 m         12450 (2)     9030     9140 (2)     5770    
1.5 m         14630 (2)     8300     8890     5420    
0.0 m         14870     7970     9140     5180    
-1.5 m 8750 (2)     14800     7920     9040     5090    
-3.0 m 15830 (2)     14040 (2)     8040     9090     5140    
-4.5 m 15590 (2)     11490 (2)     8340     8120 (2)     5370    
    325C LN Excavator, 6.15 m reach boom, 2.65 m reach stick, 1.35 m3 bucket, and 600 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     7.5 m             3470 (2)     8.37    
6.0 m 6550 (2)     4210     3350 (2)     2930     9.28    
4.5 m 6920     4140     3360 (2)     2540     9.81    
3.0 m 6740     3970     3480     2360     10.02    
1.5 m 6540     3800     3720 (2)     2330     9.96    
0.0 m 6400     3660     4120 (2)     2450     9.60    
-1.5 m 6340     3610     4760 (2)     2800     8.93    
-3.0m         2960 (2)     7.83    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 13
    325C LN Excavator, 6.15 m reach boom, 3.2 m reach stick, 1.35 m3 bucket, and 600 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
1.5 m 3.0 m     4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)     (F)     (S)    
(H)     9.0 m                                    
7.5 m                                
6.0 m                                
4.5 m                         7120 (2)     6250    
3.0 m                 11320 (2)     9290     8500 (2)     5860    
1.5 m                 13840 (2)     8470     9480     5470    
0.0 m         4450 (2)     14930     8010     9150     5180    
-1.5 m 5130 (2)     8520 (2)     14740     7900     8980     5030    
-3.0 m 9480 (2)     13790 (2)     14580 (2)     7900     8980     5030    
-4.5 m         17700 (2)     16480     12620 (2)     8130     9150     5180    
    325C LN Excavator, 6.15 m reach boom, 3.2 m reach stick, 1.35 m3 bucket, and 600 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m 9.0 m     Maximum    
(F) (S)     (F)     (S)     (F)     (S)     m    
(H)     9.0 m                     2940 (2)     7.64    
7.5 m 4120 (2)             2690 (2)     8.98    
6.0 m 5910 (2)     4300             2600 (2)     9.82    
4.5 m 6390 (2)     4180     4100 (2)     2860     2620 (2)     2280     10.31    
3.0 m 6780     4000     4900     2810     2720     2120     10.52    
1.5 m 6550     3800     4800     2720     2920 (2)     2080     10.46    
0.0 m 6370     3630     4720     2640     3250 (2)     2180     10.12    
-1.5 m 6280     3550             3770 (2)     2450     9.49    
-3.0m 6290     3560             3940 (2)     3030     8.48    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 14
    325C LN Excavator, 6.15 m reach boom, 3.2 m HD reach stick, 1.35 m3 bucket, and 600 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
1.5 m 3.0 m     4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)     (F)     (S)    
(H)     9.0 m                                    
7.5 m                                
6.0 m                                
4.5 m                         7060 (2)     6200    
3.0 m                 11240 (2)     9220     8430 (2)     5800    
1.5 m                 13750 (2)     8380     9410     5400    
0.0 m         4420 (2)     14830     7910     9080     5110    
-1.5 m 5100 (2)     8490 (2)     14640     7760     8910     4960    
-3.0 m 9450 (2)     13760 (2)     14480 (2)     7810     8900     4960    
-4.5 m         17590 (2)     16360     12530 (2)     8040     9080     5110    
    325C LN Excavator, 6.15 m reach boom, 3.2 m HD reach stick, 1.35 m3 bucket, and 600 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m 9.0 m     Maximum    
(F) (S)     (F)     (S)     (F)     (S)     m    
(H)     9.0 m                     2920 (2)     7.64    
7.5 m 4090 (2)             2660 (2)     8.98    
6.0 m 5850 (2)     4250             2570 (2)     9.82    
4.5 m 6330 (2)     4130     4060 (2)     2810     2590 (2)     2230     10.31    
3.0 m 6720     3940     4840     2750     2690 (2)     2070     10.52    
1.5 m 6490     3740     4740     2660     2890 (2)     2030     10.46    
0.0 m 6310     3570     4660     2590     3220 (2)     2130     10.12    
-1.5 m 6210     3480             3750 (2)     2400     9.49    
-3.0m 6230     3500             3930 (2)     2980     8.48    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 15
    325C LN Excavator, 5.85 m VA boom, 2.0 m stick, 1.7 m3 bucket, and 600 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
3.0 m 4.5 m     6.0 m    
(F) (S)     (F)     (S)     (F)     (S)    
(H)     9.0 m                            
7.5 m         9200 (2)            
6.0 m 10610 (2)     9860 (2)     7340 (2)     5770    
4.5 m         12010 (2)     9210     7990 (2)     5540    
3.0 m         14800 (2)     8160     9080 (2)     5150    
1.5 m                 8870     4790    
0.0 m     12780     7210     8650     4600    
-1.5 m     9990     7310     7920 (2)     4600    
    325C LN Excavator, 5.85 m VA boom, 2.0 m stick, 1.7 m3 bucket, and 600 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     9.0 m             5570 (2)     5.44    
7.5 m     4880 (2)     4180     7.37    
6.0 m         4670 (2)     3030     8.44    
4.5 m 5940 (2)     3500     4410 (2)     2490     9.03    
3.0 m 6220     3390     4300     2250     9.28    
1.5 m 6070     3250     4300     2220     9.2    
0.0 m 5980     3170     4630 (2)     2240     8.81    
-1.5 m                    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Table 16
    325C LN Excavator, 5.85 m VA boom, 2.5 m stick, 1.7 m3 bucket, and 600 mm track shoes (1)
All lifting capacities are in kilograms.    
(R)
4.5 m 6.0 m    
(F) (S)     (F)     (S)    
(H)     9.0 m     7730 (2)            
7.5 m 8330 (2)     6720 (2)     5880    
6.0 m 8680 (2)     6840 (2)     5910    
4.5 m 10850 (2)     9480     7840 (2)     5640    
3.0 m 14420 (2)     8450     8540 (2)     5230    
1.5 m 14690     7600     8920     4830    
0.0 m 13650 (2)     7240     8630     4580    
-1.5 m 11240 (2)     7230     8560     4520    
-3.0 m 7560 (2)     7460     5740 (2)     4650    
    325C LN Excavator, 5.85 m VA boom, 2.5 m stick, 1.7 m3 bucket, and 600 mm track shoes
All lifting capacities are in kilograms.    
(R)
7.5 m Maximum    
(F) (S)     (F)     (S)     m    
(H)     9.0 m             4220 (2)     6.32    
7.5 m         3730 (2)     3570     7.98    
6.0 m 5450 (2)     3580     3560 (2)     2660     8.95    
4.5 m 5590 (2)     3570     3560 (2)     2200     9.51    
3.0 m 5950     3420     3690 (2)     1990     9.74    
1.5 m 6060     3240     3900     1960     9.67    
0.0 m 5930     3120     4160     2120     9.30    
-1.5 m 5920     3110     3400 (2)     2530     8.58    
( 1 ) Lift capacities are based on "SAE J1097" and "ISO 10567" standards.
( 2 ) Capacity is limited by hydraulics rather than by a tipping load. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Information System:

305 CR Mini Hydraulic Excavator Light Switches
M325B Material Handler Machine Systems Boom Cylinder - Assemble
W345B Series II Material Handler Hydraulic System Control Valve (Boom Lowering)
5230B Excavator Machine Systems Gear Pump (Pump Drive Lubrication) - Assemble
M325B Material Handler Machine Systems Boom Cylinder - Disassemble
M325B Material Handler Machine Systems Stick Cylinder - Assemble
M325B Material Handler Machine Systems Stick Cylinder - Disassemble
3500B Engines Electronic Circuits
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Filter/Fluid Hours
5230B Excavator Machine Systems Gear Pump (Pump Drive Lubrication) - Disassemble
3500B Engines for 5130B and 5230B Excavators Digital Sensor Supply
HDB Series and M1 Series Heavy Duty Brushless Alternators Component Description
3500B Engines for 5130B and 5230B Excavators Electrical Power Supply
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Boom/Stick/Bucket Combinations
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Plate Locations and Film Locations
305 CR Mini Hydraulic Excavator Window Wiper and Washer Control - If Equipped
5230B Excavator Machine Systems Pilot Valve (Travel) - Remove
C9.3 Engines for Caterpillar Built Machines Electrical System
5130B Excavator Pump Drive Oil - Change
3126B Engine for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test
2001/09/17 Correction to Serial Numbers for "Alternator Debris Guard Available" {1405}
3126B Engines Fuel System - Inspect
5130B Excavator Automatic Lubrication System Grease - Add
3500B Engines for 5130B and 5230B Excavators Ether Injection System