M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Plate Locations and Film Locations Caterpillar


Plate Locations and Film Locations
`
1.1. Mark for European Union (CE Plate)
2.1. Product Identification Number (PIN) and CE Plate
3.1. Certifications
4.2. Sound
5.2. Environmental

The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.

AVSpare products such as engines, transmissions and major attachments that are not designed for an operator to ride are identified by Serial Numbers.

For quick reference, record the identification numbers in the spaces that are provided below Illustrations 1 through 5.




Illustration 1g00101287

Early type

This plate is positioned on the front of the machine, close to the operator compartment.

Machine PIN ____________________




Illustration 2g01025077

Engine Serial Number ____________________




Illustration 3g00305244

Bucket Serial Number ____________________

Mark for European Union (CE Plate)




Illustration 4g01072512

Early type

Note: The CE plate is only on machines that are going into countries in the European Union.

PIN ____________________

Model ____________________

Power (kW)____________________

Weight (kg)____________________

Product Identification Number (PIN) and CE Plate

Note: The CE plate is only on machines that are going into countries in the European Union.




Illustration 5g01048968

Later type

This plate is positioned on the front of the machine, close to the operator compartment.

  • PIN____________________

  • Model____________________

  • Power (kW)____________________

  • Weight (kg)____________________

  • Year of Manufacture____________________

Certifications

Sound




Illustration 6g01072397

A typical example of this film is shown. Your machine may have a different value.

This film is located inside the cab on the cover of the cab door.

This certification film is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the film indicates the guaranteed sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".

The Operator Sound Level for this machine is 72 dB inside the cab.

Environmental

This message is located on the right rear post in the cab and on the left hand side on top of the door.




Illustration 7g00936022

If the machine is equipped with the environmental label for the Blue Angel, then the machine meets the criteria of the "German Low Noise Construction Machinery RAL-UZ 53".

Information System:

M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Boom/Stick/Bucket Combinations
3500B Engines for 5130B and 5230B Excavators Electrical Power Supply
325C L and 325C LN Excavator Lifting Capacities Lifting Capacities - 325C Excavator
305 CR Mini Hydraulic Excavator Light Switches
M325B Material Handler Machine Systems Boom Cylinder - Assemble
W345B Series II Material Handler Hydraulic System Control Valve (Boom Lowering)
5230B Excavator Machine Systems Gear Pump (Pump Drive Lubrication) - Assemble
M325B Material Handler Machine Systems Boom Cylinder - Disassemble
M325B Material Handler Machine Systems Stick Cylinder - Assemble
M325B Material Handler Machine Systems Stick Cylinder - Disassemble
3500B Engines Electronic Circuits
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Filter/Fluid Hours
305 CR Mini Hydraulic Excavator Window Wiper and Washer Control - If Equipped
5230B Excavator Machine Systems Pilot Valve (Travel) - Remove
C9.3 Engines for Caterpillar Built Machines Electrical System
5130B Excavator Pump Drive Oil - Change
3126B Engine for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test
2001/09/17 Correction to Serial Numbers for "Alternator Debris Guard Available" {1405}
3126B Engines Fuel System - Inspect
5130B Excavator Automatic Lubrication System Grease - Add
3500B Engines for 5130B and 5230B Excavators Ether Injection System
305 CR Mini Hydraulic Excavator Window (Front) - If Equipped
5230B Excavator Hydraulic System Solenoid Valves (Pilot Manifold)
3500B Engines for 5130B and 5230B Excavators Ground Level Shutdown Switch