305 CR Mini Hydraulic Excavator Hydraulic Lockout Control Caterpillar


Hydraulic Lockout Control
`

------ WARNING! ------

Deactivation of the hydraulic controls does not prevent the blade, boom swing, or auxiliary circuit functions from moving under gravity or other external forces. Gravity or other external forces can move the blade, boom swing, or auxiliary circuit functions suddenly if a hydraulic control lever is moved.

Personal injury or death may occur from sudden machine movement.


Note: Be sure to put the hydraulic control console in the RAISED position when you are starting the engine. The engine will not start if the hydraulic control console is in the LOWERED position.



Illustration 1g00817901

DEACTIVATED - Pull the hydraulic control console upward to the RAISED position in order to deactivate the hydraulic control.

Make sure that the hydraulic control console is in the RAISED position before you exit the machine.



Illustration 2g00816872

ACTIVATED - Slowly, push the hydraulic control console downward to the LOWERED position. When the hydraulic control console is in the LOWERED position, the hydraulic controls are operable.

Information System:

5230B Excavator Machine Systems Control Valve (Swing) - Assemble
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Lifting Capacities - M318C Excavator with a One-Piece Boom
Installation Instructions for the 174-1508 Electric Motor {5927}
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Lifting Capacities - M318C Excavator with a One-Piece Boom
305 CR Mini Hydraulic Excavator Hydraulic System Specifications
5230B Excavator Machine Electronic Control System Sensors
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Lifting Capacities - M318C Excavator with a VA Boom
305 CR Mini Hydraulic Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Lifting Capacities - M318C Excavator with a VA Boom
3500B Engines for 5130B and 5230B Excavators E095 Fuel Filter Restriction Warning
325C and 325C L Excavator Boom/Stick/Bucket Combinations
3524B Engines for Off-Highway Trucks E072 Oil Level Low Mark
325C Excavator Hydraulic System Main Hydraulic Pump Air - Purge
325C Excavator Hydraulic System Operational Checks
5230B Excavator Machine Systems Control Valve (Swing) - Disassemble
325C Excavator Hydraulic System Engine Performance - Test - Engine Speed
5130B Excavator Sampling Interval and Location of Sampling Valve
325D and 329D Excavators Hydraulic System Travel on Level Ground - Test
325C Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
325D and 329D Excavators Hydraulic System Swing Speed and Overswing on Level Ground - Check
325D and 329D Excavators Hydraulic System Swing Speed and Swing Drift on a Slope - Check
325C Excavator Hydraulic System Cylinder Drift - Check - Loaded Bucket
325D and 329D Excavators Hydraulic System Cylinder Speed - Check
325C Excavator Hydraulic System Specifications