325C L and 325C LN Excavator Lifting Capacities Working Ranges Caterpillar


Working Ranges
`
1.1. 325C M Boom
2.1. 325C R Boom
3.1. 325C VA Boom

325C M Boom




Illustration 1g00817766

Table 1
325C L Excavator (1)    
Boom    
5.55 m (18.20 ft)    
Stick    
2.0 m (6.6 ft)    
(A) Maximum digging depth of 2.0 m stick    
5.5 m (18.0 ft)    
(B) Maximum cutting height of 2.0 stick    
9.0 m (29.5 ft)    
(C) Maximum horizontal reach    
9.0 m (29.5 ft)    
( 1 ) These specifications are for a machine that has a 5.55 m (20 ft 2 inch) boom, a 2.0 m (6.6 ft) stick, a 1.7 m3 (1.3 yd3 ) bucket, and a 10 percent full fuel tank.

Table 2
325C L Excavator (1)    
Boom    
5.55 m (18.20 ft)    
Stick    
2.5 m (8.2 ft)    
(A) Maximum digging depth of 2.5 m stick    
6.0 m (19.7 ft)    
(B) Maximum cutting height of 2.5 stick    
9.2 m (30.2 ft)    
(C) Maximum horizontal reach    
9.6 m (31.5 ft)    
( 1 ) These specifications are for a machine that has a 5.55 m (20 ft 2 inch) boom, a 2.5 m (8.2 ft) stick, a 1.7 m3 (1.3 yd3 ) bucket, and a 10 percent full fuel tank.

325C R Boom




Illustration 2g00817773

Table 3
325C L Excavator (1)    
Boom    
6.15 m (20.2 ft)    
Stick    
2.0 m (6.6 ft)    
(A) Maximum digging depth of 2.5 m stick    
6.0 m (19.7 ft)    
(B) Maximum cutting height of 2.5 stick    
9.2 m (30.2 ft)    
(C) Maximum horizontal reach    
9.6 m (31.5 ft)    
( 1 ) These specifications are for a machine that has a 6.15 m (20.2 ft) boom, a 2.0 m (6.6 ft) stick, a 1.7 m3 (1.3 yd3 ) bucket, and a 10 percent full fuel tank.

Table 4
325C L Excavator (1)    
Boom    
6.15 m (20.2 ft)    
Stick    
2.7 m (8.8 ft)    
(A) Maximum digging depth of 2.7 m stick    
6.5 m (21.3 ft)    
(B) Maximum cutting height of 2.7 stick    
9.75 m (32.0 ft)    
(C) Maximum horizontal reach    
10.0 m (33.0 ft)    
( 1 ) These specifications are for a machine that has a 6.15 m (20.2 ft) boom, a 2.7 m (8.8 ft) stick, a 1.7 m3 (1.3 yd3 ) bucket, and a 10 percent full fuel tank.

Table 5
325C L Excavator (1)    
Boom    
6.15 m (20.2 ft)    
Stick    
3.2 m (10.5 ft)    
(A) Maximum digging depth of 2.7 m stick    
7.0 m (23.0 ft)    
(B) Maximum cutting height of 2.7 stick    
10.0 m (33.0 ft)    
(C) Maximum horizontal reach    
11.0 m (36.1 ft)    
( 1 ) These specifications are for a machine that has a 6.15 m (20.2 ft) boom, a 3.2 m (10.5 ft) stick, a 1.7 m3 (1.3 yd3 ) bucket, and a 10 percent full fuel tank.

325C VA Boom




Illustration 3g00817774

Table 6
325C L Excavator (1)    
Boom    
5.85 m (19.2 ft)    
Stick    
2.0 m (6.6 ft)    
(A) Maximum digging depth of 2.0 m stick    
7.0 m (23.0 ft)    
(B) Maximum cutting height of 2.0 stick    
5.5 m (18.0 ft)    
(C) Maximum horizontal reach    
9.5 m (31.2 ft)    
( 1 ) These specifications are for a machine that has a 5.85 m (19.2 ft) boom, a 2.0 m (6.6 ft) stick, a 1.7 m3 (1.3 yd3 ) bucket, and a 10 percent full fuel tank.

Table 7
325C L Excavator (1)    
Boom    
5.85 m (19.2 ft)    
Stick    
2.5 m (8.2 ft)    
(A) Maximum digging depth of 2.5 m stick    
6.0 m (19.7 ft)    
(B) Maximum cutting height of 2.5 m stick    
5.5 m (18.0 ft)    
(C) Maximum horizontal reach    
9.5 m (31.2 ft)    
( 1 ) These specifications are for a machine that has a 5.85 m (19.2 ft) boom, a 2.5 m (8.2 ft)stick, a 1.7 m3 (1.3 yd3 ) bucket, and a 10 percent full fuel tank.

Information System:

H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Hammer
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft
5230B Excavator Machine Systems Selector Valve (Hydraulic Activation) - Remove
325C Excavator Hydraulic System Gear Pump (Fan Motor) - Test
5230B Excavator Machine Systems Swivel - Assemble
325C Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
325C Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
5130B Excavator Cooling System Coolant (ELC) - Change
2001/09/10 Special Instruction, REHS0932, "Procedure to Rework the Return Lines for the Margin Relief Valve" Lists Two Incorrect Part Numbers {0374, 5057, 5069}
325C Excavator Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
325C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
5230B Excavator Machine Systems Swivel - Disassemble
303 CR Mini Hydraulic Excavator Swing Boom Control
5130B Excavator Cooling System Coolant Extender (ELC) - Add
5130B Excavator Hydraulic System Oil Filter (Pilot) - Replace
305 CR Mini Hydraulic Excavator Blade Control
5130B Excavator Hydraulic System High Pressure Screen - Check/Replace
2001/08/13 Special Instruction, REHS1129, "Starting Motor Solenoid - Replace" Is Available {1467}
305 CR Mini Hydraulic Excavator Engine Starting
3046 Engine for Caterpillar Built Machines Fuel System - Prime - In-line Fuel Pump
325C Excavator Plate Locations and Film Locations
325C Excavator Hydraulic System Gear Pump (Pilot) - Test
2001/09/10 The Reverse Steering Indicator is Removed {1408, 1429}
3046 Engine for Caterpillar Built Machines Low Idle RPM - Adjust - In-line Fuel Pump