303 CR Mini Hydraulic Excavator Swing Boom Control Caterpillar


Swing Boom Control
`
303 CR Mini Hydraulic Excavator [SEBU7452]
HYDRAULIC SYSTEM

------ WARNING! ------

Unexpected operation of the boom swing control can cause injury or death.

To prevent unexpected activation of the boom swing control, always put the cover on the boom swing pedal while traveling or whenever the boom swing control is not being used.




Illustration 1g00817712

The boom swing pedal is used to swing the boom to the right or to the left. The boom swing pedal is located on the floor on the right side.



Illustration 2g00817716

Swing Right (1) - Push down on the right side of the boom swing pedal in order to swing the boom to the right.

Swing Left (2) - Push down on the left side of the boom swing pedal in order to swing the boom to the left.



Illustration 3g00817734

Operate the pedal by raising cover (A). Lower cover (A) in order to prevent improper operation of the pedal.

Information System:

325C L and 325C LN Excavator Lifting Capacities Working Ranges
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Hammer
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft
5230B Excavator Machine Systems Selector Valve (Hydraulic Activation) - Remove
325C Excavator Hydraulic System Gear Pump (Fan Motor) - Test
5230B Excavator Machine Systems Swivel - Assemble
325C Excavator Hydraulic System Travel Motor - Test - Measurement of Case Drain Oil
325C Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
5130B Excavator Cooling System Coolant (ELC) - Change
2001/09/10 Special Instruction, REHS0932, "Procedure to Rework the Return Lines for the Margin Relief Valve" Lists Two Incorrect Part Numbers {0374, 5057, 5069}
325C Excavator Hydraulic System Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
325C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
5130B Excavator Cooling System Coolant Extender (ELC) - Add
5130B Excavator Hydraulic System Oil Filter (Pilot) - Replace
305 CR Mini Hydraulic Excavator Blade Control
5130B Excavator Hydraulic System High Pressure Screen - Check/Replace
2001/08/13 Special Instruction, REHS1129, "Starting Motor Solenoid - Replace" Is Available {1467}
305 CR Mini Hydraulic Excavator Engine Starting
3046 Engine for Caterpillar Built Machines Fuel System - Prime - In-line Fuel Pump
325C Excavator Plate Locations and Film Locations
325C Excavator Hydraulic System Gear Pump (Pilot) - Test
2001/09/10 The Reverse Steering Indicator is Removed {1408, 1429}
3046 Engine for Caterpillar Built Machines Low Idle RPM - Adjust - In-line Fuel Pump
345B Series II Excavator Machine System Specifications Bucket Linkage - U-Family