325C Excavator Plate Locations and Film Locations Caterpillar


Plate Locations and Film Locations
`
1.1. Mark for European Union
2.1. Product Identification Number (PIN) and CE Plate

The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.

AVSpare products such as engines, transmissions and major attachments that are not designed for an operator to ride are identified by Serial Numbers.

For quick reference, record the identification numbers in the spaces that are provided below the illustration.




Illustration 1g00675011

Machine PIN ____________________




Illustration 2g00811064

Engine Serial Number ____________________

Mark for European Union

Note: This plate is required on machines that are operated in the European Union.




Illustration 3g00554586

This plate is located on the left side of the cab.

PIN ____________________

Model ____________________

Power (kW)____________________

Weight (kg)____________________

Product Identification Number (PIN) and CE Plate

Note: The CE plate is only on machines that are going into countries in the European Union.




Illustration 4g01095268



Illustration 5g01048968

This plate is positioned on the front of the machine, close to the operator compartment.

  • Model____________________

  • PIN____________________

  • Power (kW)____________________

  • Weight (kg)____________________

  • Year of Manufacture____________________

Information System:

3046 Engine for Caterpillar Built Machines Fuel System - Prime - In-line Fuel Pump
305 CR Mini Hydraulic Excavator Engine Starting
2001/08/13 Special Instruction, REHS1129, "Starting Motor Solenoid - Replace" Is Available {1467}
5130B Excavator Hydraulic System High Pressure Screen - Check/Replace
305 CR Mini Hydraulic Excavator Blade Control
5130B Excavator Hydraulic System Oil Filter (Pilot) - Replace
5130B Excavator Cooling System Coolant Extender (ELC) - Add
303 CR Mini Hydraulic Excavator Swing Boom Control
325C L and 325C LN Excavator Lifting Capacities Working Ranges
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Hammer
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft
5230B Excavator Machine Systems Selector Valve (Hydraulic Activation) - Remove
325C Excavator Hydraulic System Gear Pump (Pilot) - Test
2001/09/10 The Reverse Steering Indicator is Removed {1408, 1429}
3046 Engine for Caterpillar Built Machines Low Idle RPM - Adjust - In-line Fuel Pump
345B Series II Excavator Machine System Specifications Bucket Linkage - U-Family
3046 Engine for Caterpillar Built Machines High Idle RPM - Adjust - In-line Fuel Pump
M312, M315, M318 and M320 Excavators Hydraulic System Swing Motor
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Engine Starting with Jump Start Cables
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pump - Inspect
5230B Excavator Engine Oil Level - Check
5230B Excavator Engine Oil and Filter - Change
5230B Excavator Pump Drive Oil - Change
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Engine and Machine Warm-Up