Quick Coupler Operation
`
Quick Coupler Wedge Lock(Wheel Loader)
[SEBU7531]
WORK TOOL ARRANGEMENT
VT30, VT40, VT50 and VT60 Multi-Processors
General Hazard Information
VHS10, VHS30, VHS40, VHS50, VHS60 and VHS70 Work Tools
Fire Prevention and Explosion Prevention
Quick Coupler Wedge Lock(Wheel Loader)
Quick Coupler Operation
Quick Coupler Wedge Lock(Wheel Loader)
Model View Illustrations
Show/hide table
![]() |
Improper attachment of work tools could result in injury or death. Do not operate this machine until you have positive indication that the coupler pins are fully engaged. Check for engagement by: 1. Tilt the work tool down. 2. Put down pressure on the work tool. 3. Back the machine up and make sure there is not any movement between the work tool and the quick coupler assembly. |
![]() |
The quick-coupler pin switch is used to engage the pins. The quick-coupler pin switch is also used to disengage the quick coupler pins.
Show/hide table
NOTICE |
---|
Auxiliary hoses for work tools must be removed before the quick coupler pins are disengaged. Pulling the work tools with the auxiliary hoses could result in machine damage. |
Show/hide table
![]() | Disengage - Move the quick-coupler pin switch to the UNLOCKED position. The UNLOCKED position will retract the coupler pins. The work tool will now be disengaged. |
Show/hide table
![]() | Engage - Move the quick-coupler pin switch to the LOCKED position in order to engage the coupler pins. |
Information System:
Horizontal Pin Lock Series PW Quick Coupler
Operation
Quick Coupler Wedge Lock(Wheel Loader)
Model View Illustrations
312C Excavator Machine Systems
Blade Cylinder - Remove
5130B Excavator
Ladders
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Senders
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Sensors
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Switches
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B Excavators Engine and Pump Control
Operator Monitor
5130B Excavator Hydraulic System
Control Valve (Implement)
5130B Excavator Hydraulic System
Control Valve (Implement)
325C Excavator Hydraulic System
Travel Hydraulic System
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Engine and Hydraulic Pump Controller
2001/12/24
The New Steering Control Valve Groups Improve Service Life {5051}
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Shipping the Machine
312C Excavator Machine Systems
Blade Cylinder - Install
2001/10/15
Correction to Disassembly and Assembly , "Swing Frame" and Disassembly and Assembly , "Swing Cylinder" {6506}
W345B Series II Material Handler Hydraulic System
Pilot Valve (Joystick)
Quick Coupler Wedge Lock(Wheel Loader)
Model View Illustrations
M313C and M315C Excavators
Axle Oil (Rear) - Change
3046 Engine For Caterpillar Built Machines
Fuel Shutoff Solenoid - Remove and Install
325C Excavator Hydraulic System
Travel Counterbalance Valve
322C Excavator Hydraulic System
Swing Hydraulic System
325C Excavator Hydraulic System
Return Hydraulic System
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test