Quick Coupler Wedge Lock(Wheel Loader) Model View Illustrations Caterpillar


Model View Illustrations
`
1.1. Model Views
2.1. Spacing of the Hooks

Model Views




Illustration 1g00827811

Table 1
Type of Quick Coupler     SW2006     SW2007     SW2007     SW2008     SW2109     SW2109    
Part Number     204-3360     204-7661     202-0290     195-4457     202-6333     210-9996    
Serial Number Prefix     DAB     , DBA     , DBA     , DBA     , DCN     , DCN    
Depth (A)    
335 mm (13 inch)    

375 mm (15 inch)    

470 mm (19 inch)    

440 mm (17 inch)    

550 mm (21.7 inch)    

550 mm (21.7 inch)    
Height (B)    
790 mm (31 inch)    

920 mm (36 inch)    

850 mm (33 inch)    

980 mm (39 inch)    

1050 mm (41.3 inch)    

1050 mm (41.3 inch)    
Width (C)    
1090 mm (43 inch)    

1205 mm (47 inch)    

1205 mm (47 inch)    

1355 mm (53 inch)    

1835 mm (72.2 inch)    

1835 mm (72.2 inch)    
Weight    
360 kg (794 lb)    

490 kg (1080 lb)    

370 kg (816 lb)    

620 kg (1367 lb)    

1100 kg (2425 lb)    

1100 kg (2425 lb)    
Engage the Coupler.     Minimum Pressure    
10000 kPa (1450 psi)    

10000 kPa (1450 psi)    

10000 kPa (1450 psi)    

10000 kPa (1450 psi)    

8000 kPa (1160 psi)    

8000 kPa (1160 psi)    
Maximum Pressure
25000 kPa (3626 psi)    

25000 kPa (3626 psi)    

25000 kPa (3626 psi)    

25000 kPa (3626 psi)    

12000 kPa (1740 psi)    

12000 kPa (1740 psi)    
Disengage the Coupler.     Minimum Pressure    
15000 kPa (2175 psi)    

15000 kPa (2175 psi)    

15000 kPa (2175 psi)    

15000 kPa (2175 psi)    

20000 kPa (2900 psi)    

20000 kPa (2900 psi)    
Maximum Pressure
35000 kPa (5076 psi)    

35000 kPa (5076 psi)    

35000 kPa (5076 psi)    

35000 kPa (5076 psi)    

35000 kPa (5076 psi)    

35000 kPa (5076 psi)    

Spacing of the Hooks




Illustration 2g00827817

Table 2
Spacing of the Hooks on the Work Tool    
Part Number     Serial Number Prefix     Type of Quick Coupler     Dimension (D)     Dimension (E)    
204-3360     DAB     SW2006    
425 mm (16.7 inch)    

527 mm (20.7 inch)    
204-7661
202-0290    
, DBA     SW2007    
515 mm (20.3 inch)    

650 mm (25.6 inch)    
195-4457     , DBA     SW2008    
515 mm (20.3 inch)    

650 mm (25.6 inch)    
202-6333
210-9996    
, DCN     SW2109    
680 mm (26.8 inch)    

680 mm (26.8 inch)    

Information System:

W345B Series II Material Handler Hydraulic System Pilot Valve (Joystick)
2001/10/15 Correction to Disassembly and Assembly , "Swing Frame" and Disassembly and Assembly , "Swing Cylinder" {6506}
312C Excavator Machine Systems Blade Cylinder - Install
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Shipping the Machine
2001/12/24 The New Steering Control Valve Groups Improve Service Life {5051}
Quick Coupler Wedge Lock(Wheel Loader) Quick Coupler Operation
Horizontal Pin Lock Series PW Quick Coupler Operation
Quick Coupler Wedge Lock(Wheel Loader) Model View Illustrations
312C Excavator Machine Systems Blade Cylinder - Remove
5130B Excavator Ladders
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Senders
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Sensors
M313C and M315C Excavators Axle Oil (Rear) - Change
3046 Engine For Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
325C Excavator Hydraulic System Travel Counterbalance Valve
322C Excavator Hydraulic System Swing Hydraulic System
325C Excavator Hydraulic System Return Hydraulic System
37-MT, 41-MT, and 42-MT Series Starting Motors Starting Motor Solenoid - Test
325D and 329D Excavators Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
325D and 329D Excavators Hydraulic System Bypass Valve (Return) - Bypass Check Valve
312C Excavator Machine Systems Blade - Remove and Install
3126B Engine for Caterpillar Built Machines Throttle Lock Switch Circuit - Test
3046 Engine for Caterpillar Built Machines Water Pump - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Solenoid Valves