416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Sound Information and Vibration Information Caterpillar


Sound Information and Vibration Information
`
1.1. Sound Level for Enclosed Cab
2.1. Sound Performance for Machines Offered in European Union Countries and in Countries that Adopt the EU Directives
3.1. Vibration Level

Sound Level for Enclosed Cab

The operator sound pressure level is measured at the recommended operating engine speed of 2200 rpm.

The measurement for operator sound pressure level was obtained by using procedures that are specified in "ANSI/SAE J1166Oct98". The procedure specifies the requirements of the work cycle to use while the measurement is obtained. The operator sound pressure level is 81 dB(A) for the cab that is offered by AVSpare. This reading is correct under the following conditions: proper installation of the cab, proper maintenance of the cab, closed cab doors and closed cab windows.

Hearing protection may be required when operating with an open operator station or when a cab is not properly maintained. Hearing protection may also be required when the cab doors and window are open or in a noisy environment.

The exterior sound pressure level for the standard machine is 73 dB(A). The measurement was obtained using the test procedures specified in "SAE J88Jun86". The measurement was obtained under the following conditions: distance of 15 m (49.2 ft), machine in middle gear range and moving.

Sound Performance for Machines Offered in European Union Countries and in Countries that Adopt the EU Directives

Table 1
SOUND LEVELS 
Model  Sound Level 
416D(1)  81 dB(A) 
424D(1) with Utility Cab  81 dB(A) 
424D(1) with Utility Plus Cab  81 dB(A) 
416D(2), 420D(2), 430D(2), 428D(2), 432D(2), 438D(2), 442D(2)  78 dB(A) 
(1) Naturally Aspirated
(2) Turbocharged

The operator sound pressure level is measured according to dynamic test procedures and conditions specified in "ISO 6396" or "2000/14/EC". The operator sound pressure level is measured at the recommended operating engine speed of 2200 rpm.

As manufactured by AVSpare, this machine's exterior sound power level meets the criteria specified in the European Directives noted on the certificate of conformance and the accompanying labels.

Vibration Level

The hands and arms are exposed to a weighted root mean square acceleration that is less than 2.5 m/sec2.

The whole body is exposed to a weighted root mean square acceleration that is less than 0.5 m/s2.

Measurements are obtained on a representative machine using the procedures in the following standards:

  • "ISO 2631/1"

  • "ISO 5349"

  • "SAE J1166"

Information System:

330B Excavator Machine System Specifications Track Carrier Roller
305 CR Mini Hydraulic Excavator Capacities (Refill)
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - HDB Series Alternator
312C Excavator Machine Systems Tank and Filter (Hydraulic) - Remove
305 CR Mini Hydraulic Excavator Access Door and Cover Locations
312C Excavator Machine Systems Fuel Tank - Install
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - HDB Series Alternator
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Swing Lock Pin Control
312C Excavator Machine Systems Fuel Tank - Remove
Procedure to Reinforce the Frame Assembly Stabilizer{7222}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Fasteners - Swing Drive and Final Drive
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Temperature Sensor Open or Short Circuit - Test
312C and 312C L Excavator Plate Locations and Film Locations
305 CR Mini Hydraulic Excavator Belt - Inspect/Adjust/Replace
2001/10/15 A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
420D and 430D Backhoe Loaders Quick Coupler Control (Loader) - If Equipped
420D and 430D Backhoe Loaders Quick Coupler Operation (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Quick Coupler Operation (Backhoe) - Pin Grabber Quick Coupler (If Equipped)
305 CR Mini Hydraulic Excavator Boom and Stick Linkage - Lubricate
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Lubricant Viscosities
432D and 442D Backhoe Loaders Equipment Lowering with Engine Stopped
305.5 Mini Hydraulic Excavator Bucket Tips - Inspect/Replace
345B Series II Excavator Hydraulic System Main Control Valve
Horizontal Pin Lock Series PW Quick Coupler Rated Load