Bucket Tips - Inspect/Replace
`
305.5 Mini Hydraulic Excavator
[SEBU7997]
305.5 Mini Hydraulic Excavator
Quick Coupler Operation - If Equipped
305.5 Mini Hydraulic Excavator
Plate Locations and Film Locations
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
305.5 Mini Hydraulic Excavator
Bucket Tips - Inspect/Replace
1.1. Bucket Tips
2.1. Side Cutters
Show/hide table
![]() |
Personal injury or death can result from bucket falling. Block the bucket before changing bucket tips or side cutters. |
![]() |
Bucket Tips
Show/hide table
![]() | |
Illustration 1 | g00101352 |
(1) Usable (2) Replace this bucket tip. (3) Overworn |
Check the bucket tips for wear. If the bucket tip has a hole, replace the bucket tip.
- Block the bucket.
Show/hide table
![]() | |
Illustration 2 | g00823856 |
- Remove the pin from the bucket tip. Use a hammer and a punch in order to drive the pin from the bucket tip.
Show/hide table
![]() | |
Illustration 3 | g00823857 |
- Clean the adapter and the pin. When you replace tip (4) , also replace pin (6) and rubber (7) .
Show/hide table
![]() | |
Illustration 4 | g01035113 |
(4) Tip (5) Adapter (6) Pin (7) Rubber |
- Fit rubber (7) into adapter (5) .
- Install the new bucket tip onto the adapter.
Note: The bucket tip can be rotated by 180 degrees in order to allow greater penetration or less penetration.
Show/hide table
![]() | |
Illustration 5 | g00823892 |
- Drive pin (6) through tip (4) .
- After you drive pin (6) , make sure that the pin fits snugly into the groove.
Side Cutters
Show/hide table
![]() | |
Illustration 6 | g00823900 |
- Remove the mounting bolts and the side cutters.
- Clean the mounting surfaces.
- Install the new side cutters or the rotated side cutters.
Note: Some side cutters may be rotated for additional wear.
Information System:
432D and 442D Backhoe Loaders
Equipment Lowering with Engine Stopped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Lubricant Viscosities
305 CR Mini Hydraulic Excavator
Boom and Stick Linkage - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Quick Coupler Operation (Backhoe) - Pin Grabber Quick Coupler (If Equipped)
420D and 430D Backhoe Loaders
Quick Coupler Operation (Loader)
420D and 430D Backhoe Loaders
Quick Coupler Control (Loader) - If Equipped
2001/10/15
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
305 CR Mini Hydraulic Excavator
Belt - Inspect/Adjust/Replace
312C and 312C L Excavator
Plate Locations and Film Locations
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Sound Information and Vibration Information
330B Excavator Machine System Specifications
Track Carrier Roller
305 CR Mini Hydraulic Excavator
Capacities (Refill)
345B Series II Excavator Hydraulic System
Main Control Valve
Horizontal Pin Lock Series PW Quick Coupler
Rated Load
305 CR Mini Hydraulic Excavator
Cooling System Coolant (ELC) - Change
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Real Time Error Codes
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Troubleshooting Undiagnosed Problems
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Parameter - Adjust
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Hydraulic Hammer - Adjust
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Digital Output On/Off - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Electronic Governor - Calibrate
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Proportional Reducing Valve Sweep - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Proportional Reducing Valve - Calibrate