Rated Load
`
Horizontal Pin Lock Series PW Quick Coupler
[SEBU7515]
Horizontal Pin Lock Series PW Quick Coupler
Operation
Horizontal Pin Lock Series PW Quick Coupler
Quick Coupler Installation and Removal
WORK TOOL ARRANGEMENT
Show/hide table
![]() |
Failure to comply to the rated load can cause possible personal injury or property damage. This includes the risk of unintended boom lowering. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations. |
Note: Rated loads should be used as a guide. Work tools, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.
Note: The rated loads are determined when the work tool is racked back completely.
Show/hide table
![]() | |
Illustration 1 | g00833420 |
(L) Distance between the mounting pins for the lift arms and the operating load
(G) Total weight of the work tool and the operating load |
Show/hide table
Rated Load | ||||
Part Number of Quick Coupler | Serial Number Prefix of the Quick Coupler | Sales Model of the Quick Coupler | Maximum Rated Load | Weight Range of the Host Machine |
193-8523 | CHL | PW 2506 | |
|
193-8525 | CHL | PW 2507 | |
|
163-4753
363-5810 |
CHL | PW 2507 | |
|
193-8526 | CJE | PW 2708 | |
|
193-8527 | CYF | PW 2709 | |
|
208-6529 | CYF | PW 2709 | |
|
542-8611 | CJE | PW 2708 | |
|
Information System:
345B Series II Excavator Hydraulic System
Main Control Valve
305.5 Mini Hydraulic Excavator
Bucket Tips - Inspect/Replace
432D and 442D Backhoe Loaders
Equipment Lowering with Engine Stopped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers
Lubricant Viscosities
305 CR Mini Hydraulic Excavator
Boom and Stick Linkage - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Quick Coupler Operation (Backhoe) - Pin Grabber Quick Coupler (If Equipped)
420D and 430D Backhoe Loaders
Quick Coupler Operation (Loader)
420D and 430D Backhoe Loaders
Quick Coupler Control (Loader) - If Equipped
2001/10/15
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
305 CR Mini Hydraulic Excavator
Belt - Inspect/Adjust/Replace
312C and 312C L Excavator
Plate Locations and Film Locations
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Sound Information and Vibration Information
305 CR Mini Hydraulic Excavator
Cooling System Coolant (ELC) - Change
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Real Time Error Codes
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Troubleshooting Undiagnosed Problems
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Parameter - Adjust
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Hydraulic Hammer - Adjust
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Engine Speed Dial Setting - Check
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Digital Output On/Off - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Electronic Governor - Calibrate
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Proportional Reducing Valve Sweep - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Proportional Reducing Valve - Calibrate
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Speed Sensor - Replace
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Controller Input and Output Values