Blade Control
`
312C and 312C L Excavator
[SEBU7565]
312C and 312C L Excavator
Cooling System Hoses - Inspect
312C and 312C L Excavator
Air Inlet Heater Starting Aid
OPERATOR STATION
CONTROL GP-HYDRAULIC
315C Excavator
Hydraulic Lockout Control
312C and 312C L Excavator
Joystick Controls
312C and 312C L Excavator
Blade Control
Show/hide table
![]() | |
Illustration 1 | g00825821 |
(B) Right joystick (1) Blade float activation switch (2) Blade control switch |
Show/hide table
![]() | Float Mode - To activate the float mode, keep blade control switch (2) depressed and then depress blade float activation switch (1). Release blade control switch (2) and then release blade float activation switch (1). The blade will lower to the ground. The blade will remain in float mode until the control mode is activated. |
Blade Control Mode - To activate the blade control mode, keep blade control switch (2) depressed and then move the joystick in one of the following directions:
-
- Pull the right joystick backward in order to raise the blade.
- Push the right joystick forward in order to lower the blade.
Note: This mode deactivates the float mode.
Show/hide table
![]() | |
Illustration 2 | g00825806 |
Show/hide table
![]() | Lock for the Blade Control Mode - When the blade control mode is locked, blade control switch (2) does not need to be pressed in order to control the blade with the right joystick. |
Note: The float mode is not functional when the lock for the blade control mode is on.
Show/hide table
![]() | Blade Control Mode Locked - Press the top of the switch in order to lock out the Blade Control Mode. |
Show/hide table
![]() | Blade Control Mode Unlocked - Press the bottom of the switch in order to deactivate the lock for the blade control mode. |
Information System:
5230B Excavator Machine Systems
Control Valve (Rear) - Disassemble
CS56B, CP56B, CS66B, CS68B and CP68B Vibratory Soil Compactors Machine Systems
Vibratory Support - Disassemble
2001/11/19
Prerequisites for Flashing Software into Machine Electronic Control Modules {7620}
C-9 Engine for the 330C Excavator and for the 330C Mobile Hydraulic Power Unit
Sensors and Electrical Connectors
325C Excavator Machine System Specifications
Stick - R3.2C
305 CR Mini Hydraulic Excavator
Hydraulic System Oil - Change
312C and 312C L Excavator
Cooling System Hoses - Inspect
312C and 312C L Excavator
Capacities (Refill)
325C Excavator Machine System Specifications
Stick - R2.65C
5230B Excavator Machine Systems
Piston Motor (Air Conditioner) - Remove and Install
325C LCR Excavator Machine System Specifications
Stick - R3.0C
305 CR Mini Hydraulic Excavator
Hydraulic System Oil Level - Check
5230 Excavator Hydraulic System
Relief Valve (Pilot) - Test and Adjust
303.5 Mini Hydraulic Excavator
Work Tool Control
303.5 Mini Hydraulic Excavator
Work Tool Flow Control
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks
Event Codes
3126B Engine for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control
Hydraulic Oil Filter Indicator Is Abnormal - Troubleshoot
305 CR Mini Hydraulic Excavator
Track Adjustment - Inspect
304.5 Mini Hydraulic Excavator
Maintenance Interval Schedule
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators
Track Adjustment - Adjust
315C Excavator
Work Tool Control (Two-Way Flow) - If Equipped
Horizontal Pin Lock Series PW Quick Coupler
Quick Coupler Installation and Removal
303.5 Mini Hydraulic Excavator
Reference Material