312C and 312C L Excavator Lifting Capacities - 312C with a VA Boom Caterpillar


Lifting Capacities - 312C with a VA Boom
`


Illustration 1g01055537
(H) Height
(F) Lifting capacity over the front or over the rear of the machine
(S) Lifting capacity over the side of the machine
(R) Reach

Table 1
312C Excavator with a VA boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 500 mm (1 ft 8 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3720(3)          2980(3)  3.36 
6.0 m          4150(3)  3790(3)  3620      2230(3)  5.27 
4.5 m          5080(3)  4800(3)  3690  3060  2160  2010(3)  1960  6.28 
3.0 m          7840(3)  6570  4880  3630  3060  2150  1980(3)  1650  6.83 
1.5 m      6580(3)  8430(3)  6430(3)  4810  3430  2980  2080  2060(3)  1540  7.01 
0.0 m      6430(3)  8740(3)  5930  4650  3190  2870  1970  2280(3)  1560  6.86 
-1.5 m  7060(3)  6580(3)  8960  5640  4470  3030  2790  1900  2560  1740  6.36 
-3.0 m      7770(3)  8010(3)  5630  4250(3)  2940           
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3400(3)          2980(3)  3.36 
6.0 m          4080(3)  2340(3)       2230(3)  5.27 
4.5 m          4870(3)  2430(3)   2130(3)   2010(3)  1960  6.28 
3.0 m          4890(3)  3530(3)   3310  2130(3)   2080  1980(3)  1650  6.83 
1.5 m      4970(3)  6140(3)  5580  4500  3050  2480(3)   1980  2060(3)  1540  7.01 
0.0 m      4140(3)  5620(3)  5250  4300  2870  2790  1900  2280(3)  1560  6.86 
-1.5 m  6890(3)  6310(3)  6550(3)  5260  4240  2820  2770  1880  2560  1740  6.36 
-3.0 m      6760(3)  5290(3)  3410(3)   2890           
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 2
312C Excavator with a VA boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 500 mm (1 ft 8 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3550(3)          2260(3)  4.11 
6.0 m              3740(3)  3690      1790(3)  5.77 
4.5 m          3930(3)  4190(3)  3720  3140  2250  1630(3)  6.71 
3.0 m          7340(3)  6670  4910  3660  3130  2230  1610(3)  1530  7.22 
1.5 m      8640(3)  8660(3)  6490  4830  3520  3050  2150  1670(3)  1430  7.39 
0.0 m  5680(3)  6420(3)  8660(3)  6080  4730  3260  2920  2030  1840(3)  1440  7.25 
-1.5 m  6600(3)  6580(3)  9050  5720  4530  3080  2820  1930  2170(3)  1590  6.78 
-3.0 m  6370(3)  7150(3)  8680(3)  5640  4390  2960           
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3530(3)          2260(3)  4.11 
6.0 m              1850(3)      1790(3)  5.77 
4.5 m          3770(3)  3090(3)  1650(3)  1630(3)  6.71 
3.0 m          4950(3)  3070(3)  1920(3)  1610(3)  1530  7.22 
1.5 m      3790(3)  5360(3)  4120(3)  3130  2060(3)  2020  1670(3)  1430  7.39 
0.0 m  5630(3)  3360(3)  6190(3)  5350  4350  2920  2820  1920  1840(3)  1440  7.25 
-1.5 m  6270(3)  4770(3)  6850(3)  5290  4260  2840  2770  1880  2170(3)  1590  6.78 
-3.0 m  6330(3)  6510(3)  5290(3)  3690(3)  2870           
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 3
312C Excavator with a VA boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 500 mm (1 ft 8 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  7.5 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m              2670(3)          1890(3)  4.89 
6.0 m              3190(3)  2400(3)  2250      1570(3)  6.34 
4.5 m              3440(3)  3170  2310      1460(3)  7.2 
3.0 m          4800(3)  4540(3)  3650  3160  2290  2080  1430  1450(3)  1360  7.68 
1.5 m      10560(3)  8450(3)  6450  4790  3560  3090  2200  2040  1400  1510(3)  1270  7.84 
0.0 m  4320(3)  7020(3)  8680(3)  6220  4770  3300  2960  2060  1990  1340  1650(3)  1270  7.71 
-1.5 m  6010(3)  6810(3)  8910  5730  4530  3070  2820  1920      1930(3)  1380  7.27 
-3.0 m  6330(3)  7460(3)  8880  5560  4370  2930  2760  1860      2160(3)  1680  6.45 
-4.5 m      9300(3)  5950(3)  5570                   
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  7.5 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m              2040(3)          1890(3)  4.89 
6.0 m              2910(3)  1600(3)      1570(3)  6.34 
4.5 m              3120(3)  1510(3)      1460(3)  7.2 
3.0 m          4700(3)  3010(3)  1750(3)  1670(3)  1430  1450(3)  1360  7.68 
1.5 m      6330(3)  4890(3)  3540(3)  3160  1770(3)  1600(3)  1380  1510(3)  1270  7.84 
0.0 m  3860(3)  3110(3)  7140(3)  5360  4350  2920  2640(3)  1900  1810(3)  1330  1650(3)  1270  7.71 
-1.5 m  4870(3)  3800(3)  7200(3)  5200  4210  2790  2720  1830      1930(3)  1380  7.27 
-3.0 m  6220(3)  6410(3)  5920(3)  5240  4200  2780  2730  1840      2160(3)  1680  6.45 
-4.5 m      8960(3)  5430(3)                   
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 4
312C Excavator with a VA boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 600 mm (2 ft 0 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3720(3)          2980(3)  3.36 
6.0 m          4150(3)  3790(3)  3680      2230(3)  5.27 
4.5 m          5080(3)  4800(3)  3740  3110  2190  2010(3)  1990  6.28 
3.0 m          7840(3)  6670  4940  3680  3100  2190  1980(3)  1680  6.83 
1.5 m      6580(3)  8430(3)  6500  4860  3480  3030  2120  2060(3)  1570  7.01 
0.0 m      6430(3)  8740(3)  6020  4730  3240  2920  2010  2280(3)  1590  6.86 
-1.5 m  7060(3)  6580(3)  9110  5730  4550  3080  2850  1940  2610  1780  6.36 
-3.0 m      7770(3)  8010(3)  5720  4250(3)  2990           
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3400(3)          2980(3)  3.36 
6.0 m          4080(3)  2340(3)       2230(3)  5.27 
4.5 m          4870(3)  2430(3)   2130(3)   2010(3)  1990  6.28 
3.0 m          4890(3)  3530(3)   3360  2130(3)   2120  1980(3)  1680  6.83 
1.5 m      4970(3)  6140(3)  5670  4500(3)  3100  2480(3)   2020  2060(3)  1570  7.01 
0.0 m      4140(3)  5620(3)  5340  4380  2920  2840  1930  2280(3)  1590  6.86 
-1.5 m  6890(3)  6310(3)  6550(3)  5350  4320  2870  2820  1910  2610  1780  6.36 
-3.0 m      6760(3)  5290(3)  3410(3)   2940           
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 5
312C Excavator with a VA boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 600 mm (2 ft 0 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3550(3)          2260(3)  4.11 
6.0 m              3740(3)      1790(3)  5.77 
4.5 m          3930(3)  4190(3)  3770  3190  2280  1630(3)  6.71 
3.0 m          7340(3)  6760(3)  4970  3690  3180  2270  1610(3)  1560  7.22 
1.5 m      8640(3)  8660(3)  6530(3)  4880  3570  3090  2180  1670(3)  1460  7.39 
0.0 m  5680(3)  6420(3)  8660(3)  6170  4800  3310  2980  2070  1840(3)  1470  7.25 
-1.5 m  6600(3)  6580(3)  9130(3)  5810  4600  3130  2870  1960  2170(3)  1620  6.78 
-3.0 m  6370(3)  7150(3)  8680(3)  5730  4470  3010           
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3530(3)          2260(3)  4.11 
6.0 m              1850(3)      1790(3)  5.77 
4.5 m          3770(3)  3090(3)  1650(3)  1630(3)  6.71 
3.0 m          4950(3)  3070(3)  1920(3)  1610(3)  1560  7.22 
1.5 m      3790(3)  5360(3)  4120(3)  3180  2060(3)  2050  1670(3)  1460  7.39 
0.0 m  5630(3)  3360(3)  6190(3)  5440  4430  2980  2870  1960  1840(3)  1470  7.25 
-1.5 m  6270(3)  4770(3)  6850(3)  5380  4340  2890  2820  1920  2170(3)  1620  6.78 
-3.0 m  6330(3)  6510(3)  5290(3)  3690(3)  2920           
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 6
312C Excavator with a VA boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 600 mm (2 ft 0 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  7.5 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m              2670(3)          1890(3)  4.89 
6.0 m              3190(3)  2400(3)  2280      1570(3)  6.34 
4.5 m              3440(3)  3210  2340      1460(3)  7.2 
3.0 m          4800(3)  4540(3)  3680  3220  2320  2120  1460  1450(3)  1380  7.68 
1.5 m      10560(3)  8450(3)  6450  4850  3610  3140  2230  2080  1430  1510(3)  1290  7.84 
0.0 m  4320(3)  7020(3)  8680(3)  6310  4820  3350  3010  2100  2030  1370  1650(3)  1300  7.71 
-1.5 m  6010(3)  6810(3)  8980(3)  5820  4600  3120  2870  1960      1930(3)  1410  7.27 
-3.0 m  6330(3)  7460(3)  8980(3)  5650  4450  2980  2810  1900      2160(3)  1710  6.45 
-4.5 m      9300(3)  5950(3)  5660                   
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  7.5 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m              2040(3)          1890(3)  4.89 
6.0 m              2910(3)  1600(3)      1570(3)  6.34 
4.5 m              3120(3)  1510(3)      1460(3)  7.2 
3.0 m          4700(3)  3010(3)  1750(3)  1670(3)  1450  1450(3)  1380  7.68 
1.5 m      6330(3)  4890(3)  3540(3)  3210  1770(3)  1600(3)  1410  1510(3)  1290  7.84 
0.0 m  3860(3)  3110(3)  7140(3)  5450  4430  2970  2640(3)  1940  1810(3)  1360  1650(3)  1300  7.71 
-1.5 m  4870(3)  3800(3)  7200(3)  5290  4290  2840  2780  1870      1930(3)  1410  7.27 
-3.0 m  6220(3)  6410(3)  5920(3)  5330  4240(3)  2830  2760(3)  1880      2160(3)  1710  6.45 
-4.5 m      8960(3)  5430(3)                   
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 7
312C Excavator with a VA boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 700 mm (2 ft 4 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3720(3)          2980(3)  3.36 
6.0 m          4150(3)  3790(3)  3720      2230(3)  5.27 
4.5 m          5080(3)  4800(3)  3780  3160  2230  2010(3)  6.28 
3.0 m          7840(3)  6750(3)  5000  3730  3160  2230  1980(3)  1710  6.83 
1.5 m      6580(3)  8430(3)  6590  4940  3540  3090  2150  2060(3)  1600  7.01 
0.0 m      6430(3)  8740(3)  6110  4810  3300  2980  2050  2280(3)  1620  6.86 
-1.5 m  7060(3)  6580(3)  9150(3)  5830  4630  3130  2900  1970  2660  1810  6.36 
-3.0 m      7770(3)  8010(3)  5810  4250(3)  3040           
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3400(3)          2980(3)  3.36 
6.0 m          4080(3)  2340(3)       2230(3)  5.27 
4.5 m          4870(3)  2430(3)   2130(3)   2010(3)  6.28 
3.0 m          4890(3)  3530(3)   3420  2130(3)   1980(3)  1710  6.83 
1.5 m      4970(3)  6140(3)  5770  4500(3)  3150  2480(3)   2050  2060(3)  1600  7.01 
0.0 m      4140(3)  5620(3)  5440  4460  2980  2900  1970  2280(3)  1620  6.86 
-1.5 m  6890(3)  6310(3)  6550(3)  5450  4400  2920  2880  1950  2660  1810  6.36 
-3.0 m      6760(3)  5290(3)  3410(3)   2990           
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 8
312C Excavator with a VA boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 700 mm (2 ft 4 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3550(3)          2260(3)  4.11 
6.0 m              3740(3)      1790(3)  5.77 
4.5 m          3930(3)  4190(3)  3820(3)  3240  2320  1630(3)  6.71 
3.0 m          7340(3)  6810  5040  3740  3230  2310  1610(3)  1590  7.22 
1.5 m      8640(3)  8660(3)  6610  4940  3620  3150  2220  1670(3)  1480  7.39 
0.0 m  5680(3)  6420(3)  8660(3)  6270  4890  3360  3030  2100  1840(3)  1500  7.25 
-1.5 m  6600(3)  6580(3)  9130(3)  5900  4690  3180  2930  2000  2170(3)  1650  6.78 
-3.0 m  6370(3)  7150(3)  8680(3)  5830  4550  3060           
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3530(3)          2260(3)  4.11 
6.0 m              1850(3)      1790(3)  5.77 
4.5 m          3770(3)  3090(3)  1650(3)  1630(3)  6.71 
3.0 m          4950(3)  3070(3)  1920(3)  1610(3)  1590  7.22 
1.5 m      3790(3)  5360(3)  4120(3)  3230  2060(3)  1670(3)  1480  7.39 
0.0 m  5630(3)  3360(3)  6190(3)  5530  4510  3030  2890(3)  2000  1840(3)  1500  7.25 
-1.5 m  6270(3)  4770(3)  6850(3)  5470  4420  2940  2880  1950  2170(3)  1650  6.78 
-3.0 m  6330(3)  6510(3)  5290(3)  3690(3)  2970           
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 9
312C Excavator with a VA boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 700 mm (2 ft 4 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  7.5 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m              2670(3)          1890(3)  4.89 
6.0 m              3190(3)  2400(3)  2320      1570(3)  6.34 
4.5 m              3440(3)  3240(3)  2380      1460(3)  7.2 
3.0 m          4800(3)  4540(3)  3740  3270  2360(3)  2120(3)  1490  1450(3)  1410  7.68 
1.5 m      10560(3)  8450(3)  6580  4920(3)  3670  3190  2270  2120  1450  1510(3)  1320  7.84 
0.0 m  4320(3)  7020(3)  8680(3)  6400  4880(3)  3400  3060  2130  2070  1400  1650(3)  1330  7.71 
-1.5 m  6010(3)  6810(3)  8980(3)  5920  4690  3180  2930  2000      1930(3)  1440  7.27 
-3.0 m  6330(3)  7460(3)  8980(3)  5750  4530  3040  2860  1940      2160(3)  1740  6.45 
-4.5 m      9300(3)  5950(3)  5750                   
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  7.5 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m              2040(3)          1890(3)  4.89 
6.0 m              2910(3)  1600(3)      1570(3)  6.34 
4.5 m              3120(3)  1510(3)      1460(3)  7.2 
3.0 m          4700(3)  3010(3)  1750(3)  1670(3)  1480  1450(3)  1410  7.68 
1.5 m      6330(3)  4890(3)  3540(3)  3270  1770(3)  1600(3)  1440  1510(3)  1320  7.84 
0.0 m  3860(3)  3110(3)  7140(3)  5540  4510  3020  2640(3)  1970  1810(3)  1390  1650(3)  1330  7.71 
-1.5 m  4870(3)  3800(3)  7200(3)  5380  4370  2890  2830  1900      1930(3)  1440  7.27 
-3.0 m  6220(3)  6410(3)  5920(3)  5430  4240(3)  2890  2760(3)  1910      2160(3)  1740  6.45 
-4.5 m      8960(3)  5430(3)                   
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 10
312C Excavator with a VA boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 770 mm (2 ft 6 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3720(3)          2980(3)  3.36 
6.0 m          4150(3)  3790(3)  3740      2230(3)  5.27 
4.5 m          5080(3)  4800(3)  3790  3180  2240  2010(3)  6.28 
3.0 m          7840(3)  6750(3)  5030  3730  3180  2240  1980(3)  1730  6.83 
1.5 m      6580(3)  8430(3)  6620  4950  3560  3100  2170  2060(3)  1610  7.01 
0.0 m      6430(3)  8740(3)  6140  4840  3310  3000  2060  2280(3)  1630  6.86 
-1.5 m  7060(3)  6580(3)  9150(3)  5860  4660  3150  2920  1990  2680  1820  6.36 
-3.0 m      7770(3)  8010(3)  5850  4250(3)  3060           
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3400(3)          2980(3)  3.36 
6.0 m          4080(3)  2340(3)       2230(3)  5.27 
4.5 m          4870(3)  2430(3)   2130(3)   2010(3)  6.28 
3.0 m          4890(3)  3530(3)   3430  2130(3)   1980(3)  1730  6.83 
1.5 m      4970(3)  6140(3)  5800  4500(3)  3170  2480(3)   2060  2060(3)  1610  7.01 
0.0 m      4140(3)  5620(3)  5470  4490  3000  2920  1980  2280(3)  1630  6.86 
-1.5 m  6890(3)  6310(3)  6550(3)  5480  4430  2940  2890  1960  2680  1820  6.36 
-3.0 m      6760(3)  5290(3)  3410(3)   3010           
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 11
312C Excavator with a VA boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 770 mm (2 ft 6 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3550(3)          2260(3)  4.11 
6.0 m              3740(3)      1790(3)  5.77 
4.5 m          3930(3)  4190(3)  3820  3260  2330  1630(3)  6.71 
3.0 m          7340(3)  6840  5060  3760  3240  2320  1610(3)  1600  7.22 
1.5 m      8640(3)  8660(3)  6640  4960  3640  3170  2230  1670(3)  1490  7.39 
0.0 m  5680(3)  6420(3)  8660(3)  6300  4910  3380  3050  2120  1840(3)  1510  7.25 
-1.5 m  6600(3)  6580(3)  9130(3)  5930  4710  3200  2950  2010  2170(3)  1660  6.78 
-3.0 m  6370(3)  7150(3)  8680(3)  5860  4580  3080           
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m          3530(3)          2260(3)  4.11 
6.0 m              1850(3)      1790(3)  5.77 
4.5 m          3770(3)  3090(3)  1650(3)  1630(3)  6.71 
3.0 m          4950(3)  3070(3)  1920(3)  1610(3)  1600  7.22 
1.5 m      3790(3)  5360(3)  4120(3)  3250  2060(3)  1670(3)  1490  7.39 
0.0 m  5630(3)  3360(3)  6190(3)  5560  4540  3050  2890(3)  2010  1840(3)  1510  7.25 
-1.5 m  6270(3)  4770(3)  6850(3)  5500  4450  2960  2900  1960  2170(3)  1660  6.78 
-3.0 m  6330(3)  6510(3)  5290(3)  3690(3)  2990           
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Table 12
312C Excavator with a VA boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 770 mm (2 ft 6 inch) triple grouser track shoes(1)
All lifting capacities are in kilograms. 
Maximum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  7.5 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m              2670(3)          1890(3)  4.89 
6.0 m              3190(3)  2400(3)  2330      1570(3)  6.34 
4.5 m              3440(3)  3240(3)  2390      1460(3)  7.2 
3.0 m          4800(3)  4540(3)  3750  3290  2360  2120(3)  1500  1450(3)  1420  7.68 
1.5 m      10560(3)  8450(3)  6610  4930  3680(3)  3210  2280  2140  1460  1510(3)  1330  7.84 
0.0 m  4320(3)  7020(3)  8680(3)  6430  4900  3420  3080  2150  2080  1410  1650(3)  1340  7.71 
-1.5 m  6010(3)  6810(3)  8980(3)  5950  4710  3200  2950  2010      1930(3)  1450  7.27 
-3.0 m  6330(3)  7460(3)  8980(3)  5780  4560  3050  2880  1950      2160(3)  1750  6.45 
-4.5 m      9300(3)  5950(3)  5780                   
Minimum lifting capacities for the VA boom(2) 
H 
0 m 1.5 m  3.0 m  4.5 m  6.0 m  7.5 m  Maximum Reach 
F S  F  S  F  S  F  S  F  S  F  S  F  S  m 
7.5 m              2040(3)          1890(3)  4.89 
6.0 m              2910(3)  1600(3)      1570(3)  6.34 
4.5 m              3120(3)  1510(3)      1460(3)  7.2 
3.0 m          4700(3)  3010(3)  1750(3)  1670(3)  1490  1450(3)  1420  7.68 
1.5 m      6330(3)  4890(3)  3540(3)  3280  1770(3)  1600(3)  1440  1510(3)  1330  7.84 
0.0 m  3860(3)  3110(3)  7140(3)  5570  4540  3040  2640(3)  1980  1810(3)  1400  1650(3)  1340  7.71 
-1.5 m  4870(3)  3800(3)  7200(3)  5410  4400  2910  2850  1920      1930(3)  1450  7.27 
-3.0 m  6220(3)  6410(3)  5920(3)  5460  4240(3)  2900  2760(3)  1930      2160(3)  1750  6.45 
-4.5 m      8960(3)  5430(3)                   
(1) Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
(2) For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
(3) Capacity is limited by hydraulics rather than by a tipping load.

Information System:

312C and 312C L Excavator Air Inlet Heater Starting Aid
325C Excavator Machine System Specifications Bucket
5130B Excavator Equipment Lowering with Engine Stopped
M318 Excavator Hydraulic System Swing Brake Pressure - Test
5230 Excavator Hydraulic System Relief Valve (Main) - Test - If Equipped
5230 Excavator Hydraulic System Control Valve (Front) - Type 2
325C Excavator Machine System Specifications Bucket
305 CR Mini Hydraulic Excavator Boom/Stick/Bucket Combinations
BH27, BH30 and BH30 W Skid Steer Loader Backhoes Swing Cylinder - Remove and Install
5230 Excavator Hydraulic System Control Valve (Front) - Mass Excavator - Type 2
304.5 Mini Hydraulic Excavator Track Adjustment - Adjust
345B, 345B Series II and W345B Series II Excavators Engine and Pump Control Harness and Wire Identification
5130B Excavator Lifting the Boom
3456 Engine for Caterpillar Built Machines System Configuration Parameters
315C Excavator Window (Front)
Quick Coupler Wedge Lock(Wheel Loader) Operating Technique Information
325C Excavator Machine System Specifications Bucket
312C and 312C L Excavator Specifications
3456 Engine for Caterpillar Built Machines E039 Low Engine Oil Pressure Derate
345B Series II Excavator Hydraulic System SmartBoom Hydraulic System
312C and 312C L Excavator VA Boom Controls
3456 Engine for Caterpillar Built Machines Sensors and Electrical Connectors
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Boom) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick) (Mechanically Operated)