374D Excavator Plate Locations and Film Locations Caterpillar


Plate Locations and Film Locations
`
1.1. Product Identification Number (PIN) and Regional Certification Plate
2.2. Regional Certification Plate
3.1. EAC Mark for Eurasian Economic Union
4.1. Manufacturer Information
5.1. Engine Serial Number
6.1. Sound Certification Film

The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.

AVSpare products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers.

For quick reference, record the identification numbers in the spaces that are provided below the illustration.

Product Identification Number (PIN) and Regional Certification Plate



Illustration 1g00675011

The PIN plate is positioned on the front of the machine, close to the operator compartment.

  • Model____________________

  • PIN____________________

Regional Certification Plate

Note: The Regional Certification Plate is on machines that are going into the European Union.

Note: The Regional Certification Plate is on machines that are certified to the European Union requirements that were effective at that time.

If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. Several pieces of information are stamped onto the "CE" plate.



Illustration 2g01883459

For machines that are compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided.

  • Primary Engine Power (kW)____________________

  • Additional Engine Power (kW)____________________

  • Typical Machine Weight (kg)____________________

  • Year of Construction____________________

  • Machine Type____________________

For the name, the address and the country of origin for the manufacturer, see the PIN plate.

EAC Mark for Eurasian Economic Union

For machines compliant to the Eurasian Economic Union requirements, the EAC Mark and manufacture date (month and year) is incorporated into the Machine PIN Plate in the lower left-hand area. The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.

For quick reference, record the month and year of manufacture in spaces that are provided below the illustration.



Illustration 3g06094564

The Month and Year of Manufacture are on the PIN plate.

Manufacturer Information

Manufacturer:

AVSpare Inc.,
100 N.E. Adams Street
Peoria, Illinois 61629, USA

Entity authorized by the manufacturer at the territory of Eurasian Economic Union:

AVSpare Eurasia LLC
75, Sadovnicheskaya Emb.
Moscow 115035, Russia

Engine Serial Number



Illustration 4g01642803

Engine Serial Number ____________________

Sound Certification Film

If equipped, this label is located on the cab door.



Illustration 5g01221132
A typical example of this film is shown. Your machine may have a different value.

If equipped, the certification label is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value (1) that is listed on the label indicates the guaranteed exterior sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".

Information System:

Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
349F and 352F Excavators Hydraulic System Relief Valve (Line) - Test and Adjust
349E Excavator Hydraulic System Swing Hydraulic System
349F and 352F Excavators Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator
374D Excavator Leaving the Machine
Installation of the <NOBR>300-1196</NOBR> Auxiliary Hydraulic Lines Gp on Certain Hydraulic Excavators {5057}
328D CR Excavator Declaration of Conformity
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Bucket - Remove and Install
C4.4 Industrial Engine Engine Crankcase Breather Element - Replace
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Fan Drive - Assemble
374D Excavator Cooling System Coolant (ELC) - Change
349E Excavator Hydraulic System Main Hydraulic Pump
2013/08/29 Data for the Engine and Power Train for Series E Backhoe Loaders {0374, 1000, 3101, 7000}
C13 Engines for Caterpillar Built Machines Exhaust Combustion Lines
Installation of the 260-7976 Pilot Lines Gp on Certain 320Dand 323D Excavators{5057, 5059}
349F and 352F Excavators Hydraulic System Relief Valve (Swing) - Test and Adjust
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Bucket Linkage - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Water Pump - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit C9.3 Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
568 Forest Machine Hydraulic System Relief Valve (Line) - Test and Adjust
568 Forest Machine Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
568 Forest Machine Hydraulic System Relief Valve (Swing) - Test and Adjust
568 Forest Machine Hydraulic System Specifications
Installation of the 281-8245 Auxiliary Hydraulic Lines Gp on Certain Hydraulic Excavators {5057, 5057}