Capacities (Refill)
`
324E Excavator
[SEBU8575]
MACHINE ARRANGEMENT
Show/hide table
| Approximate Refill Capacities | |||
|---|---|---|---|
| Component or System | Liters | US gal | Recommended Type |
| Cooling System | 30 | 7.9 | Cat Extended Life Coolant (ELC) |
| Fuel Tank | 520 | 132 | Refer to Operation and Maintenance Manual, "Lubricant Viscosities". |
| Engine Crankcase with Filter | 23 | 6.1 | |
| Hydraulic System(1) | 175 | 46.2 | |
| Swing Drive | 10 | 2.6 | |
| Each Final Drive | 6 | 1.6 | |
| kg | lbs | ||
| Swing Gear | 14.9 | 33 | Refer to Operation and Maintenance Manual, "Lubricant Viscosities". |
| Refrigerant(2) | 0.9 | 2.0 | R-134a |
| mL | oz | ||
| Refrigerant Oil(2) | 240 | 8.2 | Polyalkylene Glycol (PAG) Oil |
Show/hide table
| (1) | The amount of hydraulic fluid that is needed to refill the hydraulic system after performing Operation and Maintenance Manual, "Hydraulic System Oil - Change" |
| (2) | Refer to Service Manual, "Air Conditioning and Heating R-134a for All AVSpare Machines" for additional information |
Information System:
325D and 329D Excavators
Joystick Controls Alternate Patterns
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Load Control Valve (Boom Cylinder) - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Load Control Valve (Boom Cylinder) - Disassemble
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
C4.4 Industrial Engine
Electrical System
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Final Drive - Disassemble - Type-Two
324E Excavator
Specifications
Installation Procedure for the 260-8007 Front Lines Group {5057}
C9.3 Tier 4 Final Engines
Fuel Filter Base - Primary
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Load Control Valve (Boom Cylinder) - Remove and Install
349F and 352F Excavators Hydraulic System
Check Valve (Return Makeup) - Slow Return Check Valve
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Hydraulic Tank - Install
Installation Procedure for the 360-6814 Hydraulic Kit (Center Lock Conversion){5057}
MP15, MP20, MP30 and MP40 Multi-Processors
Jaw - Repair
C4.4 Industrial Engine
Exhaust Gas Valve (NRS)
C4.4 Industrial Engine
Turbocharger - Single Turbocharger
2010/05/28
VIMS<SUP>TM</SUP> Supervisor January 2010 is Now Available {7601}
324E Excavator
Cooling System Coolant (ELC) - Change
320D Excavator
Fuel System Fourth Filter - Replace - If Equipped
320E and 323E Excavators
Cooling System Coolant Extender (ELC) - Add
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Final Drive - Assemble - Type-Two
320E and 323E Excavators
Cooling System Coolant Level - Check
Installation Procedure for 275-7203 Auxiliary Control Wiring Gp {1408}
330F MHPU Mobile Hydraulic Power Unit
Engine Oil Level - Check