390D Excavator Lifting Capacities

Lifting Capacities - 390D L

390D Excavator [SEBU8301]

390D Excavator Sound Information and Vibration Information

390D Excavator Operator Controls

MACHINE ARRANGEMENT

322B, 322B L, 325B and 325B L Excavators Operation

322B, 322B L, 325B and 325B L Excavators Operating Technique Information

322B, 322B L, 325B and 325B L Excavators Boom, Stick and Bucket Operation

1.1. Reach Boom 10.0 m (32 ft 10 inch)

2.2. 5.5 m (18 ft 1 inch) Stick

3.1. Reach Boom 7.25 m (23 ft 9 inch)

4.2. 5.5 m (18 ft 1 inch)

5.2. 4.4 m (14 ft 5 inch) Stick

6.1. General Boom 8.4 m (27 ft 7 inch)

7.2. 5.5 m (18 ft 1 inch) Stick

8.2. 4.4 m (14 ft 5 inch) Stick

9.2. 3.4 m (11 ft 2 inch) Stick

10.2. 2.92 m (9 ft 7 inch) Stick

11.1. Mass Boom 7.25 m (9 inch)

12.2. 3.4 m (11 ft 2 inch) Stick

13.2. 2.92 m (9 ft 7 inch) Stick

Show/hide table

Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations.

Note: Lifting capacities are based upon a standard machine with the following conditions:

lubricants
full fuel tank
Steel track
cab
75 kg (165 lb) operator

Lifting capacities will vary with different work tools and attachments. Consult your AVSpare dealer regarding the lifting capacities for specific work tools and attachments.

Note: Lifting capacities should be used as a guide. Work tools, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on lifting capacities. The operator is responsible for being aware of these effects.

Special hazards (toxic gases, ground conditions, etc.) require special precautions. The operator must determine whether special hazards exist in each application. The operator shall perform the appropriate steps in order to eliminate the hazard. The operator shall perform the appropriate steps in order to reduce the hazard.

For European applications, the lifting capacities are defined by "ISO 10567 2007". The lifting capacities are defined as the lower value of 75% of the static tipping capacity or 87% of the hydraulic lift capacity.

This machine may be equipped with various sticks. Lifting capacities may vary between the different sticks. Measure the distance on the stick between the boom hinge pin and the work tool hinge pin. This distance will inform you of the size of the stick that is equipped on the machine.

Note: In European countries, regulations require a load sensing indicator and a boom lowering control device if more than 1000 kg (2200 lb) is lifted during object handling applications. Regulations also require a load sensing indicator and a boom lowering control device if a moment that is greater than 40000 N·m (29500 lb ft) is created during object handling applications. Even if the hydraulic lift capacity is capable, do not exceed a load of 1000 kg (2200 lb). Do not exceed a moment that is greater than 40000 N·m (29500 lb ft) in European object handling applications.

Reach Boom 10.0 m (32 ft 10 inch)

Show/hide table




Illustration 1	g02143628
Lift Point: Lifting eye on power link (H) Lift point Height (F) Lifting capacity over the front or rear of the machine (S) Lifting capacity over the side of the machine (R) Lift point radius

5.5 m (18 ft 1 inch) Stick

Show/hide table

Table 1
390D Excavator with a reach boom, a 5.5 m (18 ft 1 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 900 mm (36 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft				7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F		S		F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft
6.0 m 20.0 ft									20250⁽²⁾ 43650⁽²⁾		17250⁽²⁾ 37350⁽²⁾
4.5 m 15.0 ft					29300⁽²⁾ 62850⁽²⁾				22600⁽²⁾ 48750⁽²⁾		18750⁽²⁾ 40500⁽²⁾	17700 38200
3.0 m 10.0 ft					20200⁽²⁾ 49750⁽²⁾				24700⁽²⁾ 53300⁽²⁾	21550 46550	20100⁽²⁾ 43450⁽²⁾	16700 36000
1.5 m 5.0 ft					15750⁽²⁾ 37450⁽²⁾				26100⁽²⁾ 56450⁽²⁾	20300 43800	21150⁽²⁾ 45700⁽²⁾	15800 34100
0					17000⁽²⁾ 39600⁽²⁾				26700⁽²⁾ 57800⁽²⁾	19500 42050	21700⁽²⁾ 47000⁽²⁾	15200 32700
-1.5 m -5.0 ft			11350⁽²⁾ 25900⁽²⁾		20750⁽²⁾ 47750⁽²⁾				26550⁽²⁾ 57500⁽²⁾	19050 41050	21800⁽²⁾ 47150⁽²⁾	14750 31800
-3.0 m -10.0 ft	12300⁽²⁾ 27700⁽²⁾		16800⁽²⁾ 38150⁽²⁾		26150⁽²⁾ 59950⁽²⁾		26150⁽²⁾ 57000		25700⁽²⁾ 55700⁽²⁾	18900 40700	21300⁽²⁾ 46100⁽²⁾	14550 31400
-4.5 m -15.0 ft	17900⁽²⁾ 40300⁽²⁾		23000⁽²⁾ 52100⁽²⁾		29200⁽²⁾ 63300⁽²⁾		26750 57500		24150⁽²⁾ 52250⁽²⁾	18950 40850	20200⁽²⁾ 43650⁽²⁾	14550 31350
-6.0 m -20.0 ft	24100⁽²⁾ 54400⁽²⁾		30400⁽²⁾ 67350⁽²⁾		26050⁽²⁾ 56200⁽²⁾				21850⁽²⁾ 47050⁽²⁾	19200 41400	18350⁽²⁾ 39450⁽²⁾	14750 31750
-7.5 m -25.0 ft			25300⁽²⁾ 54200⁽²⁾		21700⁽²⁾ 46450⁽²⁾				18450⁽²⁾ 39350⁽²⁾		15400⁽²⁾ 32650⁽²⁾	15100 32650⁽²⁾
-9.0 m -30.0 ft					15650⁽²⁾				13300⁽²⁾ 27500⁽²⁾		10400⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		15.0 m 50.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft									9750⁽²⁾ 21600⁽²⁾		11.82 38.26
10.5 m 35.0 ft			12200⁽²⁾ 25350⁽²⁾						9400⁽²⁾ 20800⁽²⁾		12.87 41.87
9.0 m 30.0 ft	13700⁽²⁾ 29850⁽²⁾		12900⁽²⁾ 28200⁽²⁾	12500 26800	10150⁽²⁾	9950			9250⁽²⁾ 20450⁽²⁾		13.67 44.63
7.5 m 25.0 ft	14400⁽²⁾ 31250⁽²⁾		13300⁽²⁾ 28950⁽²⁾	12200 26200	12500⁽²⁾ 25750⁽²⁾	9800 21000			9250⁽²⁾ 20400⁽²⁾	870 19450	14.27 46.68
6.0 m 20.0 ft	15250⁽²⁾ 33100⁽²⁾	14700 31650	13850⁽²⁾ 30050⁽²⁾	11800 25350	12800⁽²⁾ 27850	9600 20500			9400⁽²⁾ 20650⁽²⁾	8150 18000	14.69 48.12
4.5 m 15.0 ft	16200⁽²⁾ 35100⁽²⁾	14000 30200	14450⁽²⁾ 31300⁽²⁾	11350 24350	13150⁽²⁾ 28500⁽²⁾	9300 19950			9650⁽²⁾ 21200⁽²⁾	770 17000	14.94 49.00
3.0 m 10.0 ft	17100⁽²⁾ 37050⁽²⁾	13350 28700	15000⁽²⁾ 32550⁽²⁾	10900 23400	13450⁽²⁾ 29200⁽²⁾	9000 19300	10400⁽²⁾	7500	10050⁽²⁾ 22100⁽²⁾	7450 16400	15.04 49.35
1.5 m 5.0 ft	17850⁽²⁾ 38600⁽²⁾	12750 27400	15500⁽²⁾ 33550⁽²⁾	10450 22500	13400 28800	870 18700			10600⁽²⁾ 23300⁽²⁾	7350 16150	14.99 49.19
0	18250⁽²⁾ 39550⁽²⁾	12250 26400	15650 33650	10100 21750	13150 28300	8500 18250			11350⁽²⁾ 25000⁽²⁾	7350 16200	14.78 48.51
-1.5 m -5.0 ft	18350⁽²⁾ 39650⁽²⁾	11950 25700	15400 33100	9900 21250	13000 27950	8350 17900			11850 26100	7600 16700	14.42 47.28
-3.0 m -10.0 ft	17950⁽²⁾ 38800⁽²⁾	11750 25300	15250 32850	9750 21000	12950 27750	8300 17850			12350⁽²⁾ 27250⁽²⁾	8000 17600	13.88 45.46
-4.5 m -15.0 ft	17050⁽²⁾ 36700⁽²⁾	11750 25250	14350⁽²⁾ 30750⁽²⁾	9750 21050					12300⁽²⁾ 27050⁽²⁾	8700 19200	13.14 42.98
-6.0 m -20.0 ft	15350⁽²⁾ 32800⁽²⁾	11900 25650	12400⁽²⁾	9950					12000⁽²⁾ 26400⁽²⁾	9800 21800	12.18 39.71
-7.5 m -25.0 ft	12350⁽²⁾ 25600⁽²⁾	12300 25600⁽²⁾							11350⁽²⁾ 24850⁽²⁾		10.91 35.43
-9.0 m -30.0 ft									9800⁽²⁾ 21100⁽²⁾		9.24 29.68

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Reach Boom 7.25 m (23 ft 9 inch)

Show/hide table




Illustration 2	g02143628
Lift Point: Lifting eye on power link (H) Lift point Height (F) Lifting capacity over the front or rear of the machine (S) Lifting capacity over the side of the machine (R) Lift point radius

5.5 m (18 ft 1 inch)

Show/hide table

Table 2
390D L Excavator with a reach boom, a 5.5 m (18 ft 1 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 900 mm (35 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft				7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F		S		F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft
6.0 m 20.0 ft									18900⁽²⁾ 40650⁽²⁾		15900⁽²⁾ 34300⁽²⁾
4.5 m 15.0 ft					28000⁽²⁾ 60000⁽²⁾				21300⁽²⁾ 45800⁽²⁾		17400⁽²⁾ 37500⁽²⁾	16550 35650
3.0 m 10.0 ft					18500⁽²⁾ 46050⁽²⁾				23400⁽²⁾ 50400⁽²⁾	20450 44050	18750⁽²⁾ 40450⁽²⁾	15550 33450
1.5 m 5.0 ft					14150⁽²⁾ 33900⁽²⁾				24800⁽²⁾ 53550⁽²⁾	19200 41350	19800⁽²⁾ 42750⁽²⁾	14700 31600
0					15450⁽²⁾ 36100⁽²⁾				25400⁽²⁾ 54900⁽²⁾	18400 39600	20400⁽²⁾ 44050⁽²⁾	14050 30200
-1.5 m -5.0 ft			9850⁽²⁾ 22550⁽²⁾		19150⁽²⁾ 44250⁽²⁾				25250⁽²⁾ 54650⁽²⁾	17950 38600	20450⁽²⁾ 44200⁽²⁾	13650 29300
-3.0 m -10.0 ft	10800⁽²⁾ 24400⁽²⁾		15300⁽²⁾ 34750⁽²⁾		24550⁽²⁾ 56450⁽²⁾		24550⁽²⁾ 54650		24400⁽²⁾ 52800⁽²⁾	17800 38250	19950⁽²⁾ 43150⁽²⁾	13450 28900
-4.5 m -15.0 ft	16400⁽²⁾ 36950⁽²⁾		21400⁽²⁾ 48650⁽²⁾		27950⁽²⁾ 60450⁽²⁾		25700 55150		22850⁽²⁾ 49400⁽²⁾	17850 38400	18850⁽²⁾ 40700⁽²⁾	13400 28850
-6.0 m -20.0 ft	22550⁽²⁾ 51000⁽²⁾		28850⁽²⁾ 64600⁽²⁾		24750⁽²⁾ 53350⁽²⁾				20500⁽²⁾ 44150⁽²⁾	18100 38950	17000⁽²⁾ 36500⁽²⁾	13600 29250
-7.5 m -25.0 ft			24100⁽²⁾ 51500⁽²⁾		20450⁽²⁾ 43600⁽²⁾				17100⁽²⁾ 36400⁽²⁾		14050⁽²⁾ 29700⁽²⁾	13950 29700⁽²⁾
-9.0 m -30.0 ft					14400⁽²⁾ 31750⁽²⁾				12000⁽²⁾ 24550⁽²⁾		9050⁽²⁾ 19950⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		15.0 m 50.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft									8250⁽²⁾ 18250⁽²⁾		11.82 38.26
10.5 m 35.0 ft			10700⁽²⁾ 22050⁽²⁾						7900⁽²⁾ 17450⁽²⁾		12.87 41.87
9.0 m 30.0 ft	12250⁽²⁾ 26700⁽²⁾		11450⁽²⁾ 25000⁽²⁾	11250 24050	8650⁽²⁾ 19050⁽²⁾				7800⁽²⁾ 17150⁽²⁾		13.67 44.63
7.5 m 25.0 ft	13000⁽²⁾ 28150⁽²⁾		11850⁽²⁾ 25800⁽²⁾	10950 23450	11050⁽²⁾ 22500⁽²⁾	8600 18250			7800⁽²⁾ 17150⁽²⁾	7550 16700	14.27 46.68
6.0 m 20.0 ft	13850⁽²⁾ 30000⁽²⁾	13500 29000	12400⁽²⁾ 26950⁽²⁾	10600 22650	11350⁽²⁾ 24700⁽²⁾	8350 17800			7950⁽²⁾ 17450⁽²⁾	6900 15250	14.69 48.11
4.5 m 15.0 ft	14850⁽²⁾ 32050⁽²⁾	12850 27550	13050⁽²⁾ 28250⁽²⁾	10150 21700	11700⁽²⁾ 25400⁽²⁾	8100 17250			8200⁽²⁾ 18000⁽²⁾	6450 14300	14.94 49.00
3.0 m 10.0 ft	15750⁽²⁾ 34000⁽²⁾	12150 26100	13650⁽²⁾ 29500⁽²⁾	9700 20750	12050⁽²⁾ 26100⁽²⁾	7800 16600	8950⁽²⁾ 19750⁽²⁾	6250 13750	8600⁽²⁾ 18900⁽²⁾	6200 13700	15.04 49.35
1.5 m 5.0 ft	16450⁽²⁾ 35600⁽²⁾	11550 24850	14100⁽²⁾ 30500⁽²⁾	9250 19850	12200 26150	7500 16050			9150⁽²⁾ 20150⁽²⁾	6100 13450	14.99 49.19
0	16900⁽²⁾ 36550⁽²⁾	11100 23800	14350⁽²⁾ 31050⁽²⁾	8950 19150	11950 25650	7300 15550			9950⁽²⁾ 21900⁽²⁾	6150 13550	14.78 48.50
-1.5 m -5.0 ft	17000⁽²⁾ 36700⁽²⁾	10750 23100	14200 30500	8700 18650	11800 25300	7150 15250			10600 23400	6350 14000	14.42 47.28
-3.0 m -10.0 ft	16600⁽²⁾ 35850⁽²⁾	10600 22750	13950⁽²⁾ 30000⁽²⁾	8550 18400	11600⁽²⁾ 24700⁽²⁾	7100 15200			10950⁽²⁾ 24150⁽²⁾	6800 14950	13.88 45.46
-4.5 m -15.0 ft	15700⁽²⁾ 33700⁽²⁾	10550 22700	13000⁽²⁾ 27700⁽²⁾	8600 18450					10900⁽²⁾ 23950⁽²⁾	7500 16550	13.14 42.98
-6.0 m -20.0 ft	14000⁽²⁾ 29800⁽²⁾	10700 23050	11050⁽²⁾ 24350⁽²⁾	8800 19400					10650⁽²⁾ 23350⁽²⁾	8600 19150	12.17 39.71
-7.5 m -25.0 ft	11000⁽²⁾ 22550⁽²⁾								10000⁽²⁾ 21850⁽²⁾		10.91 35.43
-9.0 m -30.0 ft									8450⁽²⁾ 18100⁽²⁾		9.24 29.68

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 3
390D L Excavator with a reach boom, a 5.5 m (18 ft 1 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft				7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F		S		F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft
6.0 m 20.0 ft									20250⁽²⁾ 43650⁽²⁾		17250⁽²⁾ 37350⁽²⁾
4.5 m 15.0 ft					29300⁽²⁾ 62850⁽²⁾				22600⁽²⁾ 48750⁽²⁾		18750⁽²⁾ 40500⁽²⁾	17500 37700
3.0 m 10.0 ft					20200⁽²⁾ 49750⁽²⁾				24700⁽²⁾ 53300⁽²⁾	21250 45900	20100⁽²⁾ 43450⁽²⁾	16450 35500
1.5 m 5.0 ft					15750⁽²⁾ 37450⁽²⁾				26100⁽²⁾ 56450⁽²⁾	20000 43200	21150⁽²⁾ 45700⁽²⁾	15600 33650
0					17000⁽²⁾ 39600⁽²⁾				26700⁽²⁾ 57800⁽²⁾	19200 41450	21700⁽²⁾ 47000⁽²⁾	14950 32250
-1.5 m -5.0 ft			11350⁽²⁾ 25900⁽²⁾		20750⁽²⁾ 47750⁽²⁾				26550⁽²⁾ 57500⁽²⁾	18800 40450	21800⁽²⁾ 47150⁽²⁾	14550 31350
-3.0 m -10.0 ft	12300⁽²⁾ 27700⁽²⁾		16800⁽²⁾ 38150⁽²⁾		26150⁽²⁾ 59950⁽²⁾		26150 56200		25700⁽²⁾ 55700⁽²⁾	18650 40100	21300⁽²⁾ 46100⁽²⁾	14350 30900
-4.5 m -15.0 ft	17900⁽²⁾ 40300⁽²⁾		23000⁽²⁾ 52100⁽²⁾		29200⁽²⁾ 63300⁽²⁾		26350 56700		24150⁽²⁾ 52250⁽²⁾	18700 40200	20200⁽²⁾ 43650⁽²⁾	14350 30900
-6.0 m -20.0 ft	24100⁽²⁾ 54400⁽²⁾		30400⁽²⁾ 67350⁽²⁾		26050⁽²⁾ 56200⁽²⁾				21850⁽²⁾ 47050⁽²⁾	18950 40800	18350⁽²⁾ 39450⁽²⁾	14500 31300
-7.5 m -25.0 ft			25300⁽²⁾ 54200⁽²⁾		21700⁽²⁾ 46450⁽²⁾				18450⁽²⁾ 39350⁽²⁾		15400⁽²⁾ 32650⁽²⁾	14900 32200
-9.0 m -30.0 ft					15650⁽²⁾ 34500⁽²⁾				13300⁽²⁾ 27500⁽²⁾		10400⁽²⁾ 22950⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		15.0 m 50.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft									9750⁽²⁾ 21600⁽²⁾		11.82 38.26
10.5 m 35.0 ft			12200⁽²⁾ 25350⁽²⁾						9400⁽²⁾ 20800⁽²⁾		12.87 41.87
9.0 m 30.0 ft	13700⁽²⁾ 29850⁽²⁾		12900⁽²⁾ 28200⁽²⁾	12350 26450	10150⁽²⁾ 22400⁽²⁾	9800 21600			9250⁽²⁾ 20450⁽²⁾		13.67 44.63
7.5 m 25.0 ft	14400⁽²⁾ 31250⁽²⁾		13300⁽²⁾ 28950⁽²⁾	12050 25850	12500⁽²⁾ 25750⁽²⁾	9700 20700			9250⁽²⁾ 20400⁽²⁾	8650 19150	14.27 46.68
6.0 m 20.0 ft	15250⁽²⁾ 33100⁽²⁾	14500 31250	13850⁽²⁾ 30050⁽²⁾	11650 25000	12800⁽²⁾ 27850⁽²⁾	9450 20250			9400⁽²⁾ 20650⁽²⁾	8000 17700	14.69 48.12
4.5 m 15.0 ft	16200⁽²⁾ 35100⁽²⁾	13850 29800	14450⁽²⁾ 31300⁽²⁾	11200 24050	13150⁽²⁾ 28500⁽²⁾	9150 19650			9650⁽²⁾ 21200⁽²⁾	7600 16750	14.94 49.00
3.0 m 10.0 ft	17100⁽²⁾ 37050⁽²⁾	13150 28300	15000⁽²⁾ 32550⁽²⁾	10700 23050	13450⁽²⁾ 29000	8850 19000	10400⁽²⁾ 22950⁽²⁾	7350 16200	10050⁽²⁾ 22100⁽²⁾	7300 16150	15.04 49.35
1.5 m 5.0 ft	17850⁽²⁾ 38600⁽²⁾	12550 27000	15500⁽²⁾ 33550⁽²⁾	10300 22150	13200 28400	8600 18400			10600⁽²⁾ 23300⁽²⁾	7200 15850	14.99 49.19
0	18250⁽²⁾ 39550⁽²⁾	12050 26000	15400 33200	9950 21400	12950 27850	8350 17950			11300 24900	7250 15950	14.78 48.51
-1.5 m -5.0 ft	18350⁽²⁾ 39550	11750 25300	15150 32650	9700 20900	12800 27550	8200 17600			11650 25700	7450 16400	14.42 47.28
-3.0 m -10.0 ft	17950⁽²⁾ 38800⁽²⁾	11550 24900	15000 32350	9600 20650	12750 27500	8150 17550			12300 27100	7850 17350	13.88 45.46
-4.5 m -15.0 ft	17050⁽²⁾ 36700⁽²⁾	11550 24850	14350⁽²⁾ 30750⁽²⁾	9600 20700					12300⁽²⁾ 27050⁽²⁾	8550 18900	13.14 42.98
-6.0 m -20.0 ft	15350⁽²⁾ 32800⁽²⁾	11700 25250	12400⁽²⁾ 27350⁽²⁾	9800 21600					12000⁽²⁾ 26400⁽²⁾	9650 21450	12.18 39.71
-7.5 m -25.0 ft	12350⁽²⁾ 25600⁽²⁾	12100 25600⁽²⁾							11350⁽²⁾ 24850⁽²⁾		10.91 35.43
-9.0 m -30.0 ft									9800⁽²⁾ 21100⁽²⁾		9.24 29.68

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 4
390D L Excavator with a reach boom, a 5.5 m (18 ft 1 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft				7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F		S		F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft
6.0 m 20.0 ft									20250⁽²⁾ 43650⁽²⁾		17250⁽²⁾ 37350⁽²⁾
4.5 m 15.0 ft					29300⁽²⁾ 62850⁽²⁾				22600⁽²⁾ 48750⁽²⁾		18750⁽²⁾ 40500⁽²⁾	17300 37350
3.0 m 10.0 ft					20200⁽²⁾ 49750⁽²⁾				24700⁽²⁾ 53300⁽²⁾	21050 45450	20100⁽²⁾ 43450⁽²⁾	16300 35150
1.5 m 5.0 ft					15750⁽²⁾ 37450⁽²⁾				26100⁽²⁾ 56450⁽²⁾	19800 42750	21150⁽²⁾ 45700⁽²⁾	15400 33250
0					17000⁽²⁾ 39600⁽²⁾				26700⁽²⁾ 57800⁽²⁾	19000 40950	21700⁽²⁾ 47000⁽²⁾	14800 31850
-1.5 m -5.0 ft			11350⁽²⁾ 25900⁽²⁾		20750⁽²⁾ 47750⁽²⁾				26550⁽²⁾ 57500⁽²⁾	18550 40000	21800⁽²⁾ 47150⁽²⁾	14400 30950
-3.0 m -10.0 ft	12300⁽²⁾ 27700⁽²⁾		16800⁽²⁾ 38150⁽²⁾		26150⁽²⁾ 59950⁽²⁾		25850 55550		25700⁽²⁾ 55700⁽²⁾	18400 39600	21300⁽²⁾ 46100⁽²⁾	14200 30500
-4.5 m -15.0 ft	17900⁽²⁾ 40300⁽²⁾		23000⁽²⁾ 52100⁽²⁾		29200⁽²⁾ 63300⁽²⁾		26050 56050		24150⁽²⁾ 52250⁽²⁾	18450 39750	20200⁽²⁾ 43650⁽²⁾	14150 30500
-6.0 m -20.0 ft	24100⁽²⁾ 54400⁽²⁾		30400⁽²⁾ 67350⁽²⁾		26050⁽²⁾ 56200⁽²⁾				21850⁽²⁾ 47050⁽²⁾	18700 40300	18350⁽²⁾ 39450⁽²⁾	14350 30900
-7.5 m -25.0 ft			25300⁽²⁾ 54200⁽²⁾		21700⁽²⁾ 46450⁽²⁾				18450⁽²⁾ 39350⁽²⁾		15400⁽²⁾ 32650⁽²⁾	14700 31800
-9.0 m -30.0 ft					15650⁽²⁾ 34500⁽²⁾				13300⁽²⁾ 27500⁽²⁾		10400⁽²⁾ 22950⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		15.0 m 50.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft									9750⁽²⁾ 21600⁽²⁾		11.82 38.26
10.5 m 35.0 ft			12200⁽²⁾ 25350⁽²⁾						9400⁽²⁾ 20800⁽²⁾		12.87 41.87
9.0 m 30.0 ft	13700⁽²⁾ 29850⁽²⁾		12900⁽²⁾ 28200⁽²⁾	12200 26200	10150⁽²⁾ 22400⁽²⁾	9700 21400			9250⁽²⁾ 20450⁽²⁾		13.67 44.63
7.5 m 25.0 ft	14400⁽²⁾ 31250⁽²⁾		13300⁽²⁾ 28950⁽²⁾	11900 25550	12500⁽²⁾ 25750⁽²⁾	9600 20450			9250⁽²⁾ 20400⁽²⁾	8550 18950	14.27 46.68
6.0 m 20.0 ft	15250⁽²⁾ 33100⁽²⁾	14400 30950	13850⁽²⁾ 30050⁽²⁾	11500 24750	12800⁽²⁾ 27850⁽²⁾	9350 20000			9400⁽²⁾ 20650⁽²⁾	7900 17500	14.69 48.12
4.5 m 15.0 ft	16200⁽²⁾ 35100⁽²⁾	13700 29450	14450⁽²⁾ 31300⁽²⁾	11050 23750	13150⁽²⁾ 28500⁽²⁾	9050 19400			9650⁽²⁾ 21200⁽²⁾	7500 16500	14.94 49.00
3.0 m 10.0 ft	17100⁽²⁾ 37050⁽²⁾	13000 28000	15000⁽²⁾ 32550⁽²⁾	10600 22800	13350 28650	8750 18750	10400⁽²⁾ 22950⁽²⁾	7250 16000	10050⁽²⁾ 22100⁽²⁾	7250 15900	15.04 49.35
1.5 m 5.0 ft	17850⁽²⁾ 38600⁽²⁾	12400 26700	15500⁽²⁾ 33550⁽²⁾	10200 21900	13050 28050	8450 18200			10600⁽²⁾ 23300⁽²⁾	7100 15650	14.99 49.19
0	18250⁽²⁾ 39550⁽²⁾	11950 25700	15250 32800	9850 21150	12800 27550	8250 17700			11200 24600	7150 15750	14.78 48.51
-1.5 m -5.0 ft	18150 39100	11600 24950	15000 32250	9600 20650	12650 27200	8100 17400			11500 25350	7350 16200	14.42 47.28
-3.0 m -10.0 ft	17950⁽²⁾ 38700	11400 24600	14850 31950	9450 20400	12600 27150	8050 17350			12150 26800	7750 17100	13.88 45.46
-4.5 m -15.0 ft	17050⁽²⁾ 36700⁽²⁾	11400 24550	14350⁽²⁾ 30750⁽²⁾	9500 20450					12300⁽²⁾ 27050⁽²⁾	8450 18650	13.14 42.98
-6.0 m -20.0 ft	15350⁽²⁾ 32800⁽²⁾	11550 24950	12400⁽²⁾ 27350⁽²⁾	9700 21400					12000⁽²⁾ 26400⁽²⁾	9550 21150	12.18 39.71
-7.5 m -25.0 ft	12350⁽²⁾ 25600⁽²⁾	11950 25600⁽²⁾							11350⁽²⁾ 24850⁽²⁾		10.91 35.43
-9.0 m -30.0 ft									9800⁽²⁾ 21100⁽²⁾		9.24 29.68

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

4.4 m (14 ft 5 inch) Stick

Show/hide table

Table 5
390D L Excavator with a reach boom, a 4.4 m (14 ft 5 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick couple, and 900 mm (35 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F	S	F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft									15850⁽²⁾ 34250⁽²⁾
6.0 m 20.0 ft					27000⁽²⁾ 57650⁽²⁾		20750⁽²⁾ 44600⁽²⁾		17150⁽²⁾ 37000⁽²⁾	16850 36250
4.5 m 15.0 ft							22950⁽²⁾ 49350⁽²⁾	20850 45050	18500⁽²⁾ 39850⁽²⁾	15850 34100
3.0 m 10.0 ft							24600⁽²⁾ 53000⁽²⁾	19450 41950	19600⁽²⁾ 42300⁽²⁾	14950 32150
1.5 m 5.0 ft							25400⁽²⁾ 54850⁽²⁾	18500 39900	20300⁽²⁾ 43900⁽²⁾	14200 30600
0					11650⁽²⁾ 27950⁽²⁾		25300⁽²⁾ 54800⁽²⁾	18000 38750	20500⁽²⁾ 44350⁽²⁾	13750 29550
-1.5 m -5.0 ft					18500⁽²⁾ 43050⁽²⁾		24550⁽²⁾ 53200⁽²⁾	17800 38300	20200⁽²⁾ 43650⁽²⁾	13500 29000
-3.0 m -10.0 ft			16450⁽²⁾ 37600⁽²⁾		26800⁽²⁾ 60150⁽²⁾	25750 55200	23150⁽²⁾ 50150⁽²⁾	17850 38350	19250⁽²⁾ 41550⁽²⁾	13450 28900
-4.5 m -15.0 ft			25250⁽²⁾ 57500⁽²⁾		24850⁽²⁾ 53850⁽²⁾		21050⁽²⁾ 45500⁽²⁾	18050 38850	17600⁽²⁾ 37900⁽²⁾	13550 29150
-6.0 m -20.0 ft			23600⁽²⁾ 51000⁽²⁾		21050⁽²⁾ 45300⁽²⁾		18050⁽²⁾ 38700⁽²⁾		15050⁽²⁾ 32050⁽²⁾	13900 29900
-7.5 m -25.0 ft					15800⁽²⁾ 33450⁽²⁾		13600⁽²⁾ 28500⁽²⁾		10750⁽²⁾ 21800⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft	11400⁽²⁾ 25150⁽²⁾						11400⁽²⁾ 25300⁽²⁾		10.50 33.87
10.5 m 35.0 ft	13100⁽²⁾ 28650⁽²⁾						10900⁽²⁾ 24100⁽²⁾		11.67 37.92
9.0 m 30.0 ft	13400⁽²⁾ 29150⁽²⁾		12500⁽²⁾ 27300⁽²⁾	10750 22850			10700⁽²⁾ 23600⁽²⁾	9700 21650	12.55 40.94
7.5 m 25.0 ft	14000⁽²⁾ 30400⁽²⁾	13550 29100	12750⁽²⁾ 27700⁽²⁾	10500 22450			10750⁽²⁾ 23650⁽²⁾	8550 19000	13.20 43.17
6.0 m 20.0 ft	14800⁽²⁾ 32050⁽²⁾	13000 27850	13200⁽²⁾ 28600⁽²⁾	10200 21800	12000⁽²⁾ 26450⁽²⁾	8000 17650	10950⁽²⁾ 24050⁽²⁾	7800 17250	13.66 44.72
4.5 m 15.0 ft	15650⁽²⁾ 33800⁽²⁾	12350 26550	13650⁽²⁾ 29600⁽²⁾	9800 20950	12250⁽²⁾ 26500⁽²⁾	7800 16600	11350⁽²⁾ 24900⁽²⁾	7300 16050	13.93 45.67
3.0 m 10.0 ft	16350⁽²⁾ 35400⁽²⁾	11750 25250	14100⁽²⁾ 30550⁽²⁾	9400 20150	12250 26250	7550 16150	11400 25150	7000 15400	14.04 46.05
1.5 m 5.0 ft	16900⁽²⁾ 36450⁽²⁾	11250 24150	14400⁽²⁾ 31150⁽²⁾	9050 19400	12000 25800	7350 15700	11350 24950	6900 15150	13.98 45.88
0	17050⁽²⁾ 36850⁽²⁾	10900 23350	14300 30750	8800 18850	11850 25450	7200 15400	11500 25350	6950 15350	13.76 45.14
-1.5 m -5.0 ft	16800⁽²⁾ 36300⁽²⁾	10650 22900	14150⁽²⁾ 30400	8650 18550			11900⁽²⁾ 26250⁽²⁾	7250 16000	13.36 43.82
-3.0 m -10.0 ft	16050⁽²⁾ 34550⁽²⁾	10600 22800	13300⁽²⁾ 28450⁽²⁾	8650 18550			11800⁽²⁾ 26050⁽²⁾	7850 17350	12.78 41.85
-4.5 m -15.0 ft	14600⁽²⁾ 31200⁽²⁾	10700 23050					11550⁽²⁾ 25400⁽²⁾	8850 19550	11.97 39.14
-6.0 m -20.0 ft	11950⁽²⁾ 24850⁽²⁾	11050 23850					10950⁽²⁾ 24000⁽²⁾	10500 23400	10.90 35.51
-7.5 m -25.0 ft							9550⁽²⁾ 20700⁽²⁾		9.47 30.63

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 6
390D L Excavator with a reach boom, a 4.4 m (14 ft 5 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F	S	F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft									17250⁽²⁾ 37300⁽²⁾
6.0 m 20.0 ft					28250⁽²⁾ 60550⁽²⁾		22100⁽²⁾ 47550⁽²⁾		18500⁽²⁾ 40050⁽²⁾	17800 38350
4.5 m 15.0 ft							24250⁽²⁾ 52250⁽²⁾	21700 46900	19850⁽²⁾ 42850⁽²⁾	16750 36200
3.0 m 10.0 ft							25900⁽²⁾ 55900⁽²⁾	20250 43800	20950⁽²⁾ 45300⁽²⁾	15850 34200
1.5 m 5.0 ft							26700⁽²⁾ 57750⁽²⁾	19350 41750	21650⁽²⁾ 46850⁽²⁾	15150 32650
0					13200⁽²⁾ 31400⁽²⁾		26650⁽²⁾ 57700⁽²⁾	18850 40600	21850⁽²⁾ 47300⁽²⁾	14650 31600
-1.5 m -5.0 ft					20100⁽²⁾ 46550⁽²⁾		25850⁽²⁾ 56100⁽²⁾	18650 40150	21500⁽²⁾ 46550⁽²⁾	14400 31050
-3.0 m -10.0 ft			17950⁽²⁾ 40950⁽²⁾		28350⁽²⁾ 63000⁽²⁾	26450 56750	24450⁽²⁾ 53050⁽²⁾	18700 40200	20600⁽²⁾ 44500⁽²⁾	14350 30900
-4.5 m -15.0 ft			26800⁽²⁾ 60950⁽²⁾		26100⁽²⁾ 56700⁽²⁾		22350⁽²⁾ 48350⁽²⁾	18900 40700	18950⁽²⁾ 40850⁽²⁾	14500 31200
-6.0 m -20.0 ft			24850⁽²⁾ 53750⁽²⁾		22350⁽²⁾ 48150⁽²⁾		19350⁽²⁾ 41600⁽²⁾	19300 41600⁽²⁾	16400⁽²⁾ 35000⁽²⁾	14800 31950
-7.5 m -25.0 ft					17100⁽²⁾ 36250⁽²⁾		14900⁽²⁾ 31400⁽²⁾		12100⁽²⁾ 24800⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft	12950⁽²⁾ 28550⁽²⁾						12950⁽²⁾ 28750⁽²⁾		10.50 33.88
10.5 m 35.0 ft	14550⁽²⁾ 31850⁽²⁾						12450⁽²⁾ 27500⁽²⁾		11.67 37.92
9.0 m 30.0 ft	14850⁽²⁾ 32300⁽²⁾		13950⁽²⁾ 30500⁽²⁾	11850 25250			12250⁽²⁾ 26950⁽²⁾	10800 24100	12.55 40.94
7.5 m 25.0 ft	15450⁽²⁾ 33500⁽²⁾	14600 31400	14150⁽²⁾ 30850⁽²⁾	11600 24850			12250⁽²⁾ 26950⁽²⁾	9650 21450	13.20 43.17
6.0 m 20.0 ft	16200⁽²⁾ 35100⁽²⁾	14000 30100	14600⁽²⁾ 31700⁽²⁾	11250 24150	13450⁽²⁾ 29650⁽²⁾	9100 20050	12450⁽²⁾ 27350⁽²⁾	8900 19650	13.66 44.73
4.5 m 15.0 ft	17000⁽²⁾ 36850⁽²⁾	13350 28750	15050⁽²⁾ 32700⁽²⁾	10850 23300	13500 29000	8900 19000	12800⁽²⁾ 28150⁽²⁾	8400 18500	13.93 45.67
3.0 m 10.0 ft	17750⁽²⁾ 38400⁽²⁾	12750 27450	15500⁽²⁾ 33600⁽²⁾	10450 22450	13250 28500	8650 18550	12450 27450	8100 17800	14.04 46.05
1.5 m 5.0 ft	18250⁽²⁾ 39500⁽²⁾	12250 26350	15550 33450	10100 21700	13050 28050	8450 18100	12350 27250	7950 17550	13.98 45.88
0	18400⁽²⁾ 39850	11850 25550	15250 32850	9800 21150	12900 27750	8300 17800	12550 27600	8050 17700	13.76 45.14
-1.5 m -5.0 ft	18150⁽²⁾ 39300⁽²⁾	11650 25050	15100 32550	9650 20800			13000⁽²⁾ 28650⁽²⁾	8350 18400	13.36 43.82
-3.0 m -10.0 ft	17400⁽²⁾ 37550⁽²⁾	11600 24950	14700⁽²⁾ 31500⁽²⁾	9650 20800			13200⁽²⁾ 29100⁽²⁾	8900 19650	12.78 41.85
-4.5 m -15.0 ft	15950⁽²⁾ 34200⁽²⁾	11700 25200					12950⁽²⁾ 28500⁽²⁾	9850 21850	11.98 39.14
-6.0 m -20.0 ft	13300⁽²⁾ 27900⁽²⁾	12050 26050					12350⁽²⁾ 27000⁽²⁾	11500 25600	10.90 35.51
-7.5 m -25.0 ft							10950⁽²⁾ 23700⁽²⁾		9.47 30.63

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 7
390D L Excavator with a reach boom, a 4.4 m (14 ft 5 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F	S	F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft									17250⁽²⁾ 37300⁽²⁾
6.0 m 20.0 ft					28250⁽²⁾ 60550⁽²⁾		22100⁽²⁾ 47550⁽²⁾		18500⁽²⁾ 40050⁽²⁾	17600 38000
4.5 m 15.0 ft							24250⁽²⁾ 52250⁽²⁾	21450 46400	19850⁽²⁾ 42850⁽²⁾	16600 36800
3.0 m 10.0 ft							25900⁽²⁾ 55900⁽²⁾	20050 43350	20950⁽²⁾ 45300⁽²⁾	15650 33850
1.5 m 5.0 ft							26700⁽²⁾ 57750⁽²⁾	19100 41250	21650⁽²⁾ 46850⁽²⁾	14950 32250
0					13200⁽²⁾ 31400⁽²⁾		26650⁽²⁾ 57700⁽²⁾	18600 40100	21850⁽²⁾ 47300⁽²⁾	14500 31200
-1.5 m -5.0 ft					20100⁽²⁾ 46550⁽²⁾		25850⁽²⁾ 56100⁽²⁾	18450 39650	21500⁽²⁾ 46550⁽²⁾	14250 30650
-3.0 m -10.0 ft			17950⁽²⁾ 40950⁽²⁾		28350⁽²⁾ 63000⁽²⁾	26100 56100	24450⁽²⁾ 53050⁽²⁾	18450 39700	20600⁽²⁾ 44500⁽²⁾	14200 30550
-4.5 m -15.0 ft			26800⁽²⁾ 60950⁽²⁾		26100⁽²⁾ 56700⁽²⁾		22350⁽²⁾ 48350⁽²⁾	18650 40200	18950⁽²⁾ 40850⁽²⁾	14300 30800
-6.0 m -20.0 ft			24850⁽²⁾ 53750⁽²⁾		22350⁽²⁾ 48150⁽²⁾		19350⁽²⁾ 41600⁽²⁾	19100 41150	16400⁽²⁾ 35000⁽²⁾	14650 31600
-7.5 m -25.0 ft					17100⁽²⁾ 36250⁽²⁾		14900⁽²⁾ 31400⁽²⁾		12100⁽²⁾ 24800⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft	12950⁽²⁾ 28550⁽²⁾						12950⁽²⁾ 28750⁽²⁾		10.50 33.88
10.5 m 35.0 ft	14550⁽²⁾ 31850⁽²⁾						12450⁽²⁾ 27500⁽²⁾	12400 27500⁽²⁾	11.67 37.92
9.0 m 30.0 ft	14850⁽²⁾ 32300⁽²⁾	14850⁽²⁾ 32050	13950⁽²⁾ 30500⁽²⁾	11700 25000			12250⁽²⁾ 26950⁽²⁾	10700 23850	12.55 40.94
7.5 m 25.0 ft	15450⁽²⁾ 33500⁽²⁾	14450 31050	14150⁽²⁾ 30850⁽²⁾	11450 24600			12250⁽²⁾ 26950⁽²⁾	9550 21200	13.20 43.17
6.0 m 20.0 ft	16200⁽²⁾ 35100⁽²⁾	13850 29800	14600⁽²⁾ 31700⁽²⁾	11100 23850	13450⁽²⁾ 29650⁽²⁾	9000 19850	12450⁽²⁾ 27350⁽²⁾	8800 19450	13.66 44.73
4.5 m 15.0 ft	17000⁽²⁾ 36850⁽²⁾	13200 28450	15050⁽²⁾ 32700⁽²⁾	10700 23000	13350 28700	8750 18800	12650⁽²⁾ 27950⁽²⁾	8300 18250	13.93 45.67
3.0 m 10.0 ft	17750⁽²⁾ 38400⁽²⁾	12600 27150	15500⁽²⁾ 33600⁽²⁾	10300 22150	13100 28200	8550 18300	12300 27150	8000 17600	14.04 46.05
1.5 m 5.0 ft	18250⁽²⁾ 39500⁽²⁾	12100 26050	15350 33100	9950 21450	12900 27700	8300 17850	12200 26900	7850 17350	13.98 45.88
0	18300 39400	11700 25250	15100 32500	9700 20850	12750 27400	8150 17550	12400 27300	7950 17500	13.76 45.14
-1.5 m -5.0 ft	18050 38850	11500 24750	14950 32150	9550 20550			12850⁽²⁾ 28350⁽²⁾	8250 18150	13.36 43.82
-3.0 m -10.0 ft	17400⁽²⁾ 37550⁽²⁾	11450 24650	14700⁽²⁾ 31500⁽²⁾	9550 20550			13200⁽²⁾ 29100⁽²⁾	8800 19400	12.78 41.85
-4.5 m -15.0 ft	15950⁽²⁾ 34200⁽²⁾	11550 24900					12950⁽²⁾ 28500⁽²⁾	9750 21600	11.98 39.14
-6.0 m -20.0 ft	13300⁽²⁾ 27900⁽²⁾	11900 25750					12350⁽²⁾ 27000⁽²⁾	11350 25300	10.90 35.51
-7.5 m -25.0 ft							10950⁽²⁾ 23700⁽²⁾		9.47 30.63

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

General Boom 8.4 m (27 ft 7 inch)

Show/hide table




Illustration 3	g02143628
Lift Point: Lifting eye on power link (H) Lift point Height (F) Lifting capacity over the front or rear of the machine (S) Lifting capacity over the side of the machine (R) Lift point radius

5.5 m (18 ft 1 inch) Stick

Show/hide table

Table 8
390D L Excavator with a general boom, a 5.5 m (18 ft 1 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F	S	F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft
6.0 m 20.0 ft									17550⁽²⁾ 38050⁽²⁾
4.5 m 15.0 ft					27100⁽²⁾ 58300⁽²⁾		22200⁽²⁾ 48000⁽²⁾		19200⁽²⁾ 41600⁽²⁾	18800 40550
3.0 m 10.0 ft					31500⁽²⁾ 67950⁽²⁾		24800⁽²⁾ 53650⁽²⁾	23600 50850	20800⁽²⁾ 45100⁽²⁾	18000 38750
1.5 m 5.0 ft					34800⁽²⁾ 75200⁽²⁾	30950 66700	26950⁽²⁾ 58300⁽²⁾	22400 48250	22200⁽²⁾ 48100⁽²⁾	17200 37100
0			19000⁽²⁾ 43500⁽²⁾		36450⁽²⁾ 78950⁽²⁾	29700 63950	28300⁽²⁾ 61300⁽²⁾	21500 46300	23150⁽²⁾ 50150⁽²⁾	16600 35750
-1.5 m -5.0 ft	14250⁽²⁾ 31950⁽²⁾		23200⁽²⁾ 52800⁽²⁾		36600⁽²⁾ 79250⁽²⁾	29050 62450	28750⁽²⁾ 62200⁽²⁾	20950 45050	23500⁽²⁾ 50850⁽²⁾	16200 34850
-3.0 m -10.0 ft	20200⁽²⁾ 45350⁽²⁾		29400⁽²⁾ 66800⁽²⁾		35350⁽²⁾ 76600⁽²⁾	28800 61950	28150⁽²⁾ 60900⁽²⁾	20650 44500	23050⁽²⁾ 49850⁽²⁾	15950 34350
-4.5 m -15.0 ft	27050⁽²⁾ 60950⁽²⁾		37750⁽²⁾ 85900⁽²⁾		32850⁽²⁾ 70950⁽²⁾	28900 62150	26400⁽²⁾ 57000⁽²⁾	20650 44500	21650⁽²⁾ 46550⁽²⁾	15950 34350
-6.0 m -20.0 ft	35550⁽²⁾ 80450⁽²⁾		35950⁽²⁾ 77350⁽²⁾		28700⁽²⁾ 61650⁽²⁾		23250⁽²⁾ 49750⁽²⁾	20900 45100	18750⁽²⁾ 39750⁽²⁾	16200 34950
-7.5 m -25.0 ft			27300⁽²⁾ 57700⁽²⁾		22250⁽²⁾ 46900⁽²⁾		17700⁽²⁾ 36800⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft							9050⁽²⁾ 20200⁽²⁾		9.83 31.62
10.5 m 35.0 ft	10950⁽²⁾ 21900⁽²⁾						8500⁽²⁾ 18800⁽²⁾		11.07 35.92
9.0 m 30.0 ft	13000⁽²⁾ 27750⁽²⁾						8200⁽²⁾ 18050⁽²⁾		12.00 39.10
7.5 m 25.0 ft	14450⁽²⁾ 31150⁽²⁾		11500⁽²⁾ 23250⁽²⁾				8050⁽²⁾ 17750⁽²⁾		12.68 41.43
6.0 m 20.0 ft	16200⁽²⁾ 35100⁽²⁾	15250 32850	13500⁽²⁾ 28200⁽²⁾	12200 26100			8100⁽²⁾ 17800⁽²⁾		13.15 43.05
4.5 m 15.0 ft	17150⁽²⁾ 37300⁽²⁾	14750 31800	15400⁽²⁾ 32400⁽²⁾	11900 25500			8250⁽²⁾ 18150⁽²⁾		13.43 44.03
3.0 m 10.0 ft	18200⁽²⁾ 38450⁽²⁾	14250 30650	16300⁽²⁾ 35450⁽²⁾	11550 24800	9000⁽²⁾ 19850⁽²⁾		8600⁽²⁾ 18850⁽²⁾		13.54 44.43
1.5 m 5.0 ft	19050⁽²⁾ 41350⁽²⁾	13750 29550	16700 35900	11200 24100			9050⁽²⁾ 19900⁽²⁾		13.48 44.25
0	19650⁽²⁾ 42550⁽²⁾	13300 28650	16400 35300	10950 23550			9750⁽²⁾ 21450⁽²⁾	9450 20800	13.25 43.49
-1.5 m -5.0 ft	19700 42350	13000 28050	16250 34950	10800 23200			10700⁽²⁾ 23650⁽²⁾	9800 21600	12.84 42.11
-3.0 m -10.0 ft	19250⁽²⁾ 41500⁽²⁾	12900 27750	15550⁽²⁾ 27550⁽²⁾	10750 23150			12200⁽²⁾ 26950⁽²⁾	10500 23150	12.23 40.06
-4.5 m -15.0 ft	17700⁽²⁾ 37750⁽²⁾	12900 27850					14500⁽²⁾ 32200⁽²⁾	11650 25800	11.39 37.21
-6.0 m -20.0 ft							14900⁽²⁾ 32650⁽²⁾	13650 30450	10.26 33.37
-7.5 m -25.0 ft							13650⁽²⁾ 29750⁽²⁾		8.71 28.11

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 9
390D L Excavator with a general boom, a 5.5 m (18 ft 1 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F	S	F	S	F	S
12.0 m 40.0 ft
10.5 m 35.0 ft
9.0 m 30.0 ft
7.5 m 25.0 ft
6.0 m 20.0 ft									17550⁽²⁾ 38050⁽²⁾
4.5 m 15.0 ft					27100⁽²⁾ 58300⁽²⁾		22200⁽²⁾ 48000⁽²⁾		19200⁽²⁾ 41600⁽²⁾	18650 40150
3.0 m 10.0 ft					31500⁽²⁾ 67950⁽²⁾		24800⁽²⁾ 53650⁽²⁾	23350 50350	20800⁽²⁾ 45100⁽²⁾	17800 38350
1.5 m 5.0 ft					34800⁽²⁾ 75200⁽²⁾	30650 66050	26950⁽²⁾ 58300⁽²⁾	22150 47800	22200⁽²⁾ 48100⁽²⁾	17050 36700
0			19000⁽²⁾ 43500⁽²⁾		36450⁽²⁾ 78950⁽²⁾	29400 63300	28300⁽²⁾ 61300⁽²⁾	21300 45850	23150⁽²⁾ 50150⁽²⁾	16450 35400
-1.5 m -5.0 ft	14250⁽²⁾ 31950⁽²⁾		23200⁽²⁾ 52800⁽²⁾		36600⁽²⁾ 79250⁽²⁾	28750 61800	28750⁽²⁾ 62200⁽²⁾	20700 44600	23500⁽²⁾ 50850⁽²⁾	16000 34450
-3.0 m -10.0 ft	20200⁽²⁾ 45350⁽²⁾		29400⁽²⁾ 66800⁽²⁾		35350⁽²⁾ 76600⁽²⁾	28500 61300	28150⁽²⁾ 60900⁽²⁾	20450 44000	23050⁽²⁾ 49850⁽²⁾	15800 34000
-4.5 m -15.0 ft	27050⁽²⁾ 60950⁽²⁾		37750⁽²⁾ 85900⁽²⁾		32850⁽²⁾ 70950⁽²⁾	28600 61500	26400⁽²⁾ 57000⁽²⁾	20450 44000	21650⁽²⁾ 46550⁽²⁾	15750 34000
-6.0 m -20.0 ft	35550⁽²⁾ 80450⁽²⁾		35950⁽²⁾ 77350⁽²⁾		28700⁽²⁾ 61650⁽²⁾		23250⁽²⁾ 49750⁽²⁾	20700 44600	18750⁽²⁾ 39750⁽²⁾	16000 34550
-7.5 m -25.0 ft			27300⁽²⁾ 57700⁽²⁾		22250⁽²⁾ 46900⁽²⁾		17700⁽²⁾ 36800⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	m ft
12.0 m 40.0 ft							9050⁽²⁾ 20200⁽²⁾		9.83 31.62
10.5 m 35.0 ft	10950⁽²⁾ 21900⁽²⁾						8500⁽²⁾ 18800⁽²⁾		11.07 35.92
9.0 m 30.0 ft	13000⁽²⁾ 27750⁽²⁾						8200⁽²⁾ 18050⁽²⁾		12.00 39.10
7.5 m 25.0 ft	14450⁽²⁾ 31150⁽²⁾		11500⁽²⁾ 23250⁽²⁾				8050⁽²⁾ 17750⁽²⁾		12.68 41.43
6.0 m 20.0 ft	16200⁽²⁾ 35100⁽²⁾	15150 32500	13500⁽²⁾ 28200⁽²⁾	12050 25850			8100⁽²⁾ 17800⁽²⁾		13.15 43.05
4.5 m 15.0 ft	17150⁽²⁾ 37300⁽²⁾	14650 31450	15400⁽²⁾ 32400⁽²⁾	11750 25250			8250⁽²⁾ 18150⁽²⁾		13.43 44.03
3.0 m 10.0 ft	18200⁽²⁾ 38450⁽²⁾	14100 30350	16300⁽²⁾ 35450⁽²⁾	11400 24550	9000⁽²⁾ 19850⁽²⁾		8600⁽²⁾ 18850⁽²⁾		13.54 44.43
1.5 m 5.0 ft	19050⁽²⁾ 41350⁽²⁾	13600 29250	16500 35550	11100 23850			9050⁽²⁾ 19900⁽²⁾		13.48 44.25
0	19650⁽²⁾ 42550⁽²⁾	13150 28350	16250 34950	10850 23300			9750⁽²⁾ 21450⁽²⁾	9350 20550	13.25 43.49
-1.5 m -5.0 ft	19500 41900	12900 27750	16050 34550	10650 22950			10700⁽²⁾ 23650⁽²⁾	9700 21350	12.84 42.11
-3.0 m -10.0 ft	19250⁽²⁾ 41500⁽²⁾	12750 27450	15550⁽²⁾ 27550⁽²⁾	10600 22900			12200⁽²⁾ 26950⁽²⁾	10350 22850	12.23 40.06
-4.5 m -15.0 ft	17700⁽²⁾ 37750⁽²⁾	12750 27550					14500⁽²⁾ 32200⁽²⁾	11500 25500	11.39 37.21
-6.0 m -20.0 ft							14900⁽²⁾ 32650⁽²⁾	13500 30100	10.26 33.37
-7.5 m -25.0 ft							13650⁽²⁾ 29750⁽²⁾		8.71 28.11

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

4.4 m (14 ft 5 inch) Stick

Show/hide table

Table 10
390D L Excavator with a general boom, a 4.4 m (14 ft 5 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F	S	F	S	F	S
10.5 m 35.0 ft									15350⁽²⁾ 31700⁽²⁾
9.0 m 30.0 ft									17350⁽²⁾ 37950⁽²⁾
7.5 m 25.0 ft									18050⁽²⁾ 39350⁽²⁾
6.0 m 20.0 ft							21900⁽²⁾ 47350⁽²⁾		19250⁽²⁾ 41800⁽²⁾	18950 40850
4.5 m 15.0 ft					30450⁽²⁾ 65550⁽²⁾		24300⁽²⁾ 52450⁽²⁾	23950 51700	20650⁽²⁾ 44750⁽²⁾	18200 39200
3.0 m 10.0 ft					34200⁽²⁾ 73750⁽²⁾	31400 67700	26500⁽²⁾ 57300⁽²⁾	22750 49000	22000⁽²⁾ 47650⁽²⁾	17450 37600
1.5 m 5.0 ft					36300⁽²⁾ 78500⁽²⁾	29900 64400	28100⁽²⁾ 60750⁽²⁾	21750 46850	23050⁽²⁾ 49850⁽²⁾	16800 36200
0					36650⁽²⁾ 79450⁽²⁾	29100 62650	28750⁽²⁾ 62250⁽²⁾	21050 45400	23500⁽²⁾ 50950⁽²⁾	16300 35150
-1.5 m -5.0 ft			24000⁽²⁾ 54600⁽²⁾		35650⁽²⁾ 77300⁽²⁾	28850 62000	28400⁽²⁾ 61550⁽²⁾	20750 44650	23300⁽²⁾ 50450⁽²⁾	16050 34550
-3.0 m -10.0 ft	23450⁽²⁾ 52700⁽²⁾		33350⁽²⁾ 75900⁽²⁾		33350⁽²⁾ 72300⁽²⁾	28900 62100	27000⁽²⁾ 58400⁽²⁾	20650 44500	22200⁽²⁾ 47850⁽²⁾	15950 34450
-4.5 m -15.0 ft	33050⁽²⁾ 74550⁽²⁾		36400⁽²⁾ 78800⁽²⁾		29700⁽²⁾ 64150⁽²⁾	29200 62850	24300⁽²⁾ 52300⁽²⁾	20850 44950	19700⁽²⁾ 42150⁽²⁾	16150 34850
-6.0 m -20.0 ft			28900⁽²⁾ 61900⁽²⁾		24100⁽²⁾ 51450⁽²⁾		19550⁽²⁾ 41400⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft							11350⁽²⁾ 25200⁽²⁾		9.79 31.65
9.0 m 30.0 ft	13350⁽²⁾ 25400⁽²⁾						10900⁽²⁾ 24050⁽²⁾		10.82 35.23
7.5 m 25.0 ft	16900⁽²⁾ 35650⁽²⁾	15150 32500					10700⁽²⁾ 23600⁽²⁾		11.57 37.80
6.0 m 20.0 ft	17500⁽²⁾ 38100⁽²⁾	14800 31800	11750⁽²⁾ 25900⁽²⁾				10750⁽²⁾ 23700⁽²⁾		12.09 39.57
4.5 m 15.0 ft	18250⁽²⁾ 39700⁽²⁾	14350 30850	15150⁽²⁾ 29200⁽²⁾	11550 24750			11050⁽²⁾ 24250⁽²⁾	10900 24050	12.40 40.64
3.0 m 10.0 ft	19050⁽²⁾ 41350⁽²⁾	13900 29850	16750 34000⁽²⁾	11300 24250			11500⁽²⁾ 25300⁽²⁾	10550 23200	12.52 41.07
1.5 m 5.0 ft	19650⁽²⁾ 42600⁽²⁾	13450 28950	16500 35250⁽²⁾	11050 23750			12200⁽²⁾ 26850⁽²⁾	10450 22950	12.46 40.87
0	19800 42650	13150 28300	16300 29800⁽²⁾	10850 23400			13300⁽²⁾ 29250⁽²⁾	10600 23350	12.21 40.05
-1.5 m -5.0 ft	19500⁽²⁾ 42050⁽²⁾	12950 27950					14850⁽²⁾ 32800⁽²⁾	11100 24500	11.76 38.54
-3.0 m -10.0 ft	18150⁽²⁾ 38900⁽²⁾	12950 27950					16500⁽²⁾ 36350⁽²⁾	12100 26750	11.09 36.29
-4.5 m -15.0 ft							16150⁽²⁾ 35500⁽²⁾	13800 30700	10.15 33.11
-6.0 m -20.0 ft							15050⁽²⁾ 32900⁽²⁾		8.85 28.71

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 11
390D L Excavator with a general boom, a 4.4 m (14 ft 5 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft
	F	S	F	S	F	S	F	S	F	S
10.5 m 35.0 ft									15350⁽²⁾ 31700⁽²⁾
9.0 m 30.0 ft									17350⁽²⁾ 37950⁽²⁾
7.5 m 25.0 ft									18050⁽²⁾ 39350⁽²⁾
6.0 m 20.0 ft							21900⁽²⁾ 47350⁽²⁾		19250⁽²⁾ 41800⁽²⁾	18800 40450
4.5 m 15.0 ft					30450⁽²⁾ 65550⁽²⁾		24300⁽²⁾ 52450⁽²⁾	23750 51250	20650⁽²⁾ 44750⁽²⁾	18050 38850
3.0 m 10.0 ft					34200⁽²⁾ 73750⁽²⁾	31100 67050	26500⁽²⁾ 57300⁽²⁾	22500 48550	22000⁽²⁾ 47650⁽²⁾	17250 37200
1.5 m 5.0 ft					36300⁽²⁾ 78500⁽²⁾	29600 63750	28100⁽²⁾ 60750⁽²⁾	21500 46350	23050⁽²⁾ 49850⁽²⁾	16600 35800
0					36650⁽²⁾ 79450⁽²⁾	28800 62000	28750⁽²⁾ 62250⁽²⁾	20850 44900	23500⁽²⁾ 50950⁽²⁾	16150 34800
-1.5 m -5.0 ft			24000⁽²⁾ 54600⁽²⁾		35650⁽²⁾ 77300⁽²⁾	28500 61350	28400⁽²⁾ 61550⁽²⁾	20500 44150	23300⁽²⁾ 50450⁽²⁾	15850 34200
-3.0 m -10.0 ft	23450⁽²⁾ 52700⁽²⁾		33350⁽²⁾ 75900⁽²⁾		33350⁽²⁾ 72300⁽²⁾	28550 61450	27000⁽²⁾ 58400⁽²⁾	20450 44000	22200⁽²⁾ 47850⁽²⁾	15800 34050
-4.5 m -15.0 ft	33050⁽²⁾ 74550⁽²⁾		36400⁽²⁾ 78800⁽²⁾		29700⁽²⁾ 64150⁽²⁾	28900 62200	24300⁽²⁾ 52300⁽²⁾	20650 44450	19700⁽²⁾ 42150⁽²⁾	15950 34450
-6.0 m -20.0 ft			28900⁽²⁾ 61900⁽²⁾		24100⁽²⁾ 51450⁽²⁾		19550⁽²⁾ 41400⁽²⁾
H	R
	10.5 m 35.0 ft		12.0 m 40.0 ft		13.5 m 45.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft							11350⁽²⁾ 25200⁽²⁾		9.79 31.65
9.0 m 30.0 ft	13350⁽²⁾ 25400⁽²⁾						10900⁽²⁾ 24050⁽²⁾		10.82 35.23
7.5 m 25.0 ft	16900⁽²⁾ 35650⁽²⁾	15000 32150					10700⁽²⁾ 23600⁽²⁾		11.57 37.80
6.0 m 20.0 ft	17500⁽²⁾ 38100⁽²⁾	14650 31450	11750⁽²⁾ 25900⁽²⁾	11650 25700			10750⁽²⁾ 23700⁽²⁾		12.09 39.57
4.5 m 15.0 ft	18250⁽²⁾ 39700⁽²⁾	14200 30550	15150⁽²⁾ 29200⁽²⁾	11400 24500			11050⁽²⁾ 24250⁽²⁾	10800 23800	12.40 40.64
3.0 m 10.0 ft	19050⁽²⁾ 41350⁽²⁾	13750 29550	16600 34000⁽²⁾	11150 23950			11500⁽²⁾ 25300⁽²⁾	10400 22950	12.52 41.07
1.5 m 5.0 ft	19650⁽²⁾ 42600⁽²⁾	13300 28650	16300 35100	10900 23450			12200⁽²⁾ 26850⁽²⁾	10300 22700	12.46 40.87
0	19600 42200	13000 28000	16150 29800⁽²⁾	10750 23150			13300⁽²⁾ 29250⁽²⁾	10500 23100	12.21 40.05
-1.5 m -5.0 ft	19400 41800	12800 27600					14850⁽²⁾ 32800⁽²⁾	11000 24250	11.76 38.54
-3.0 m -10.0 ft	18150⁽²⁾ 38900⁽²⁾	12800 27650					16500⁽²⁾ 36350⁽²⁾	11950 26450	11.09 36.29
-4.5 m -15.0 ft							16150⁽²⁾ 35500⁽²⁾	13650 30350	10.15 33.11
-6.0 m -20.0 ft							15050⁽²⁾ 32900⁽²⁾		8.85 28.71

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

3.4 m (11 ft 2 inch) Stick

Show/hide table

Table 12
390D L Excavator with a general boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											14000⁽²⁾ 31100⁽²⁾		8.73 28.12
9.0 m 30.0 ft							17600⁽²⁾ 38600⁽²⁾				13100⁽²⁾ 28950⁽²⁾		9.88 32.11
7.5 m 25.0 ft					20350⁽²⁾ 44050⁽²⁾		18100⁽²⁾ 39450⁽²⁾	17750 38050	15700⁽²⁾ 34600⁽²⁾	13350 29450	12700⁽²⁾ 28000⁽²⁾		10.70 34.92
6.0 m 20.0 ft			27750⁽²⁾ 59600⁽²⁾		22350⁽²⁾ 48250⁽²⁾		19150⁽²⁾ 41500⁽²⁾	17150 36900	17150⁽²⁾ 37350⁽²⁾	13100 28100	12650⁽²⁾ 27900⁽²⁾	11500 25450	11.25 36.83
4.5 m 15.0 ft			31950⁽²⁾ 68600⁽²⁾	30950 66850	24550⁽²⁾ 52950⁽²⁾	22000 47450	20350⁽²⁾ 44100⁽²⁾	16500 35500	17700⁽²⁾ 38450⁽²⁾	12750 27400	12950⁽²⁾ 28450⁽²⁾	10650 23550	11.59 37.97
3.0 m 10.0 ft					26400⁽²⁾ 56950⁽²⁾	20950 45100	21450⁽²⁾ 46400⁽²⁾	15850 34100	18250⁽²⁾ 39550⁽²⁾	12400 26600	13500⁽²⁾ 29650⁽²⁾	10250 22600	11.71 38.43
1.5 m 5.0 ft			27900⁽²⁾ 61500⁽²⁾	27550 60700	27400⁽²⁾ 59200⁽²⁾	20200 43450	22150⁽²⁾ 47900⁽²⁾	15350 33000	18550⁽²⁾ 40100⁽²⁾	12050 25900	14400⁽²⁾ 31650⁽²⁾	10200 22450	11.65 38.22
0			31650⁽²⁾ 75050⁽²⁾	27900 59900	27400⁽²⁾ 59250⁽²⁾	19750 42450	22200⁽²⁾ 47950⁽²⁾	15000 32250	18350⁽²⁾ 39550⁽²⁾	11850 25500	15750⁽²⁾ 34750⁽²⁾	10500 23100	11.38 37.33
-1.5 m -5.0 ft	19950⁽²⁾ 46150⁽²⁾		32600⁽²⁾ 70750⁽²⁾	27900 59850	26300⁽²⁾ 56950⁽²⁾	19600 42150	21400⁽²⁾ 46150⁽²⁾	14850 31950	17250⁽²⁾ 36850⁽²⁾	11800 25450	16050⁽²⁾ 35300⁽²⁾	11200 24700	10.90 35.72
-3.0 m -10.0 ft	34600⁽²⁾ 75900⁽²⁾		29400⁽²⁾ 63750⁽²⁾	28150 60400	24050⁽²⁾ 51950⁽²⁾	19700 42350	19400⁽²⁾ 41600⁽²⁾	14950 32200			15600⁽²⁾ 34250⁽²⁾	12550 27800	10.17 33.26
-4.5 m -15.0 ft	28850⁽²⁾ 62450⁽²⁾		24700⁽²⁾ 53150⁽²⁾		20150⁽²⁾ 43100⁽²⁾	20050 43100⁽²⁾	15100⁽²⁾ 33300⁽²⁾				14500⁽²⁾ 31750⁽²⁾		9.13 29.76
-6.0 m -20.0 ft			17250⁽²⁾ 36150⁽²⁾		12650⁽²⁾ 27900⁽²⁾						12000⁽²⁾ 28000⁽²⁾		7.63 23.96

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 13
390D L Excavator with a general boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											15550⁽²⁾ 34550⁽²⁾		8.73 28.12
9.0 m 30.0 ft							19000⁽²⁾ 41700⁽²⁾	19000⁽²⁾ 41350			14600⁽²⁾ 32300⁽²⁾		9.88 32.11
7.5 m 25.0 ft					21700⁽²⁾ 47050⁽²⁾		19500⁽²⁾ 42450⁽²⁾	18900 40700	17150⁽²⁾ 37800⁽²⁾	14550 32100	14200⁽²⁾ 31300⁽²⁾	14050 31250	10.70 34.92
6.0 m 20.0 ft			29050⁽²⁾ 62450⁽²⁾		23650⁽²⁾ 51150⁽²⁾		20500⁽²⁾ 44500⁽²⁾	18350 39500	18500⁽²⁾ 40350⁽²⁾	14300 30700	14150⁽²⁾ 31100⁽²⁾	12700 28100	11.25 36.83
4.5 m 15.0 ft			33200⁽²⁾ 71350⁽²⁾	32000 69150	25850⁽²⁾ 55800⁽²⁾	23100 49850	21700⁽²⁾ 47000⁽²⁾	17650 38000	19050⁽²⁾ 41450⁽²⁾	13950 29950	14350⁽²⁾ 31600⁽²⁾	11850 26200	11.59 37.97
3.0 m 10.0 ft					27650⁽²⁾ 59800⁽²⁾	22050 47500	22800⁽²⁾ 49300⁽²⁾	17000 36600	19600⁽²⁾ 42550⁽²⁾	13550 29150	14900⁽²⁾ 32750⁽²⁾	11450 25250	11.72 38.43
1.5 m 5.0 ft			29550⁽²⁾ 65100⁽²⁾	28550 62950	28650⁽²⁾ 62000⁽²⁾	21250 45800	23450⁽²⁾ 50750⁽²⁾	16450 35450	19900⁽²⁾ 42800	13200 28450	15800⁽²⁾ 34700⁽²⁾	11400 25050	11.65 38.22
0			33250⁽²⁾ 77850⁽²⁾	28900 62200	28650⁽²⁾ 62050⁽²⁾	20800 44850	23500⁽²⁾ 50850⁽²⁾	16100 34700	19650 42350	13000 28000	17150⁽²⁾ 37750⁽²⁾	11650 25650	11.38 37.34
-1.5 m -5.0 ft	21450⁽²⁾ 49500⁽²⁾		33850⁽²⁾ 73500⁽²⁾	28900 62150	27600⁽²⁾ 59750⁽²⁾	20650 44500	22700⁽²⁾ 49000⁽²⁾	16000 34450	18600⁽²⁾ 39850⁽²⁾	12950 28000	17400⁽²⁾ 38300⁽²⁾	12350 27300	10.90 35.72
-3.0 m -10.0 ft	36000⁽²⁾ 78550⁽²⁾		30650⁽²⁾ 66500⁽²⁾	29150 62650	25350⁽²⁾ 54750⁽²⁾	20750 44750	20700⁽²⁾ 44500⁽²⁾	16050 34650			16900⁽²⁾ 37200⁽²⁾	13700 30350	10.17 33.26
-4.5 m -15.0 ft	30050⁽²⁾ 65100⁽²⁾		25950⁽²⁾ 55900⁽²⁾		21450⁽²⁾ 45900⁽²⁾	21150 45600	16400⁽²⁾ 36150⁽²⁾				15800⁽²⁾ 34650⁽²⁾		9.13 29.76
-6.0 m -20.0 ft			18500⁽²⁾ 38900⁽²⁾		13950⁽²⁾ 30750⁽²⁾						13300⁽²⁾ 30850⁽²⁾		7.63 23.96

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 14
390D L Excavator with a general boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											14000⁽²⁾ 31100⁽²⁾		8.73 28.12
9.0 m 30.0 ft							17600⁽²⁾ 38600⁽²⁾	17600⁽²⁾ 38250			13100⁽²⁾ 28950⁽²⁾		9.88 32.11
7.5 m 25.0 ft					20350⁽²⁾ 44050⁽²⁾		18100⁽²⁾ 39450⁽²⁾	17550 37700	15700⁽²⁾ 34600⁽²⁾	13200 29100	12700⁽²⁾ 28000⁽²⁾	12700 28000⁽²⁾	10.70 34.92
6.0 m 20.0 ft			27750⁽²⁾ 59600⁽²⁾		22350⁽²⁾ 48250⁽²⁾		19150⁽²⁾ 41500⁽²⁾	17000 36550	17150⁽²⁾ 37350⁽²⁾	12950 27800	12650⁽²⁾ 27900⁽²⁾	11350 25150	11.25 36.83
4.5 m 15.0 ft			31950⁽²⁾ 68600⁽²⁾	30650 66200	24550⁽²⁾ 52950⁽²⁾	21800 46950	20350⁽²⁾ 44100⁽²⁾	16350 35100	17700⁽²⁾ 38450⁽²⁾	12600 27050	12950⁽²⁾ 28450⁽²⁾	10550 23300	11.59 37.97
3.0 m 10.0 ft					26400⁽²⁾ 56950⁽²⁾	20700 44650	21450⁽²⁾ 46400⁽²⁾	15700 33750	18250⁽²⁾ 39550⁽²⁾	12250 26300	13500⁽²⁾ 29650⁽²⁾	10150 22350	11.71 38.43
1.5 m 5.0 ft			29550⁽²⁾ 61500⁽²⁾	27250 60050	27400⁽²⁾ 59200⁽²⁾	19950 42950	22150⁽²⁾ 47900⁽²⁾	15150 32600	18550 39800	11900 25600	14400⁽²⁾ 31650⁽²⁾	10050 22150	11.65 38.22
0			31650⁽²⁾ 75050⁽²⁾	27600 59250	27400⁽²⁾ 59250⁽²⁾	19500 42000	22200⁽²⁾ 47950⁽²⁾	14850 31900	18350⁽²⁾ 39550⁽²⁾	11700 25150	15750⁽²⁾ 34750⁽²⁾	10350 22800	11.38 37.33
-1.5 m -5.0 ft	19950⁽²⁾ 46150⁽²⁾		32600⁽²⁾ 70750⁽²⁾	27600 59200	26300⁽²⁾ 56950⁽²⁾	19350 41650	21400⁽²⁾ 46150⁽²⁾	14700 31600	17250⁽²⁾ 36850⁽²⁾	11650 25100	16050⁽²⁾ 35300⁽²⁾	11050 24400	10.90 35.72
-3.0 m -10.0 ft	34600⁽²⁾ 75900⁽²⁾		29400⁽²⁾ 63750⁽²⁾	27800 59750	24050⁽²⁾ 51950⁽²⁾	19450 41900	19400⁽²⁾ 41600⁽²⁾	14750 31800			15600⁽²⁾ 34250⁽²⁾	12400 27500	10.17 33.26
-4.5 m -15.0 ft	28850⁽²⁾ 62450⁽²⁾		24700⁽²⁾ 53150⁽²⁾		20150⁽²⁾ 43100⁽²⁾	19850 42750	15100⁽²⁾ 33300⁽²⁾				14500⁽²⁾ 31750⁽²⁾		9.13 29.76
-6.0 m -20.0 ft			17250⁽²⁾ 36150⁽²⁾		12650⁽²⁾ 27900⁽²⁾						12000⁽²⁾ 28000⁽²⁾		7.63 23.96

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 15
390D L Excavator with a general boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											15550⁽²⁾ 34550⁽²⁾		8.73 28.12
9.0 m 30.0 ft							19000⁽²⁾ 41700⁽²⁾	19000⁽²⁾ 40950			14600⁽²⁾ 32300⁽²⁾		9.88 32.11
7.5 m 25.0 ft					21700⁽²⁾ 47050⁽²⁾		19500⁽²⁾ 42450⁽²⁾	18750 40300	17150⁽²⁾ 37800⁽²⁾	14400 31750	14200⁽²⁾ 31300⁽²⁾	13900 30950	10.70 34.92
6.0 m 20.0 ft			29050⁽²⁾ 62450⁽²⁾		23650⁽²⁾ 51150⁽²⁾		20500⁽²⁾ 44500⁽²⁾	18150 39100	18500⁽²⁾ 40350⁽²⁾	14150 30400	14150⁽²⁾ 31100⁽²⁾	12550 27800	11.25 36.83
4.5 m 15.0 ft			33200⁽²⁾ 71350⁽²⁾	31700 68500	25850⁽²⁾ 55800⁽²⁾	22900 49400	21700⁽²⁾ 47000⁽²⁾	17450 37650	19050⁽²⁾ 41450⁽²⁾	13800 29650	14350⁽²⁾ 31600⁽²⁾	11750 25900	11.59 37.97
3.0 m 10.0 ft					27650⁽²⁾ 59800⁽²⁾	21800 47050	22800⁽²⁾ 49300⁽²⁾	16800 36250	19600⁽²⁾ 42550⁽²⁾	13400 28850	14900⁽²⁾ 32750⁽²⁾	11300 24950	11.72 38.43
1.5 m 5.0 ft			29550⁽²⁾ 65100⁽²⁾	28250 62300	28650⁽²⁾ 62000⁽²⁾	21050 45350	23450⁽²⁾ 50750⁽²⁾	16300 35100	19700 42350	13050 28150	15800⁽²⁾ 34700⁽²⁾	11250 24750	11.65 38.22
0			33250⁽²⁾ 77850⁽²⁾	28600 61500	28650⁽²⁾ 62050⁽²⁾	20600 44350	23500⁽²⁾ 50850⁽²⁾	15950 34350	19450 41900	12850 27700	17150⁽²⁾ 37750⁽²⁾	11500 25400	11.38 37.34
-1.5 m -5.0 ft	21450⁽²⁾ 49500⁽²⁾		33850⁽²⁾ 73500⁽²⁾	28600 61500	27600⁽²⁾ 59750⁽²⁾	20450 44000	22700⁽²⁾ 49000⁽²⁾	15800 34050	18600⁽²⁾ 39850⁽²⁾	12800 27650	17400⁽²⁾ 38300⁽²⁾	12250 26950	10.90 35.72
-3.0 m -10.0 ft	36000⁽²⁾ 78550⁽²⁾		30650⁽²⁾ 66500⁽²⁾	28850 62000	25350⁽²⁾ 54750⁽²⁾	20550 44250	20700⁽²⁾ 44500⁽²⁾	15900 34250			16900⁽²⁾ 37200⁽²⁾	13550 30000	10.17 33.26
-4.5 m -15.0 ft	30050⁽²⁾ 65100⁽²⁾		25950⁽²⁾ 55900⁽²⁾		21450⁽²⁾ 45900⁽²⁾	20950 45150	16400⁽²⁾ 36150⁽²⁾	16350 36050			15800⁽²⁾ 34650⁽²⁾		9.13 29.76
-6.0 m -20.0 ft			18500⁽²⁾ 38900⁽²⁾		13950⁽²⁾ 30750⁽²⁾						13300⁽²⁾ 30850⁽²⁾		7.63 23.96

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

2.92 m (9 ft 7 inch) Stick

Show/hide table

Table 16
390D L Excavator with a general boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 900 mm (35 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft					21400⁽²⁾ 47300⁽²⁾						17650⁽²⁾ 39300⁽²⁾		8.15 26.19
9.0 m 30.0 ft					21450⁽²⁾ 46800⁽²⁾		20050⁽²⁾ 41750⁽²⁾	19250 41150			16450⁽²⁾ 36400⁽²⁾		9.38 30.44
7.5 m 25.0 ft					22700⁽²⁾ 49200⁽²⁾		20300⁽²⁾ 44250⁽²⁾	18950 40800			15900⁽²⁾ 35100⁽²⁾	15200 33850	10.23 33.39
6.0 m 20.0 ft			30550⁽²⁾ 65650⁽²⁾		24600⁽²⁾ 53150⁽²⁾	24350 52500	21200⁽²⁾ 46000⁽²⁾	18400 39650	19150⁽²⁾ 41050⁽²⁾	14400 30850	15800⁽²⁾ 34800⁽²⁾	13650 30250	10.81 35.38
4.5 m 15.0 ft					26650⁽²⁾ 57550⁽²⁾	23150 50000	22300⁽²⁾ 48300⁽²⁾	17750 38300	19550⁽²⁾ 42500⁽²⁾	14050 30250	16050⁽²⁾ 35300⁽²⁾	12750 28150	11.16 36.58
3.0 m 10.0 ft					28250⁽²⁾ 61050⁽²⁾	22150 47850	23200⁽²⁾ 50300⁽²⁾	17150 37000	19950⁽²⁾ 43250⁽²⁾	13750 29550	16650⁽²⁾ 36600⁽²⁾	12300 27100	11.29 37.05
1.5 m 5.0 ft					28950⁽²⁾ 62650⁽²⁾	21500 46350	23700⁽²⁾ 51300⁽²⁾	16700 35950	20050⁽²⁾ 43350⁽²⁾	13450 28950	17650⁽²⁾ 28800⁽²⁾	12250 26950	11.22 36.84
0			30450⁽²⁾ 72700⁽²⁾	29450 63350	28550⁽²⁾ 61900⁽²⁾	21150 45600	23500⁽²⁾ 50850⁽²⁾	16400 35350	19550⁽²⁾ 42100⁽²⁾	13300 28650	18300⁽²⁾ 40350⁽²⁾	12600 27750	10.95 35.91
-1.5 m -5.0 ft			32700⁽²⁾ 71200⁽²⁾	29550 63500	27150⁽²⁾ 58800⁽²⁾	21100 45450	22350⁽²⁾ 48300⁽²⁾	16350 35200			18000⁽²⁾ 39650⁽²⁾	13450 29650	10.44 34.23
-3.0 m -10.0 ft	32750⁽²⁾ 71700⁽²⁾		29200⁽²⁾ 63400⁽²⁾		24450⁽²⁾ 52850⁽²⁾	21300 45850	19850⁽²⁾ 42350⁽²⁾	16500 35650			17300⁽²⁾ 38050⁽²⁾	15100 33400	9.68 31.66
-4.5 m -15.0 ft	26750⁽²⁾ 57950⁽²⁾		23950⁽²⁾ 51550⁽²⁾		19850⁽²⁾ 42200⁽²⁾						15750⁽²⁾ 34450⁽²⁾		8.58 27.95

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 17
390D L Excavator with a general boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft					20000⁽²⁾ 44150⁽²⁾						16050⁽²⁾ 35800⁽²⁾		8.15 26.19
9.0 m 30.0 ft					20050⁽²⁾ 43750⁽²⁾		18600⁽²⁾ 38350⁽²⁾	17800 37950			14900⁽²⁾ 32950⁽²⁾		9.38 30.43
7.5 m 25.0 ft					21350⁽²⁾ 46200⁽²⁾		18900⁽²⁾ 41200⁽²⁾	17550 37650			14400⁽²⁾ 31750⁽²⁾	13800 30750	10.23 33.39
6.0 m 20.0 ft			29300⁽²⁾ 62850⁽²⁾		23250⁽²⁾ 50250⁽²⁾	22950 49400	19850⁽²⁾ 43050⁽²⁾	17050 36600	17750⁽²⁾ 37800⁽²⁾	13000 27800	14300⁽²⁾ 31500⁽²⁾	12300 27200	10.81 35.38
4.5 m 15.0 ft					25350⁽²⁾ 54700⁽²⁾	21800 46950	20950⁽²⁾ 45350⁽²⁾	16400 35300	18200⁽²⁾ 39500⁽²⁾	12700 27250	14600⁽²⁾ 32100⁽²⁾	11400 25150	11.16 36.58
3.0 m 10.0 ft					26950⁽²⁾ 58250⁽²⁾	20800 44850	21900⁽²⁾ 47400⁽²⁾	15800 34000	18600⁽²⁾ 40250⁽²⁾	12400 26550	15200⁽²⁾ 33400⁽²⁾	10950 24100	11.29 37.05
1.5 m 5.0 ft					27650⁽²⁾ 59850⁽²⁾	20150 43350	22400⁽²⁾ 48400⁽²⁾	15350 33000	18700⁽²⁾ 40350	12100 26000	16250⁽²⁾ 35700⁽²⁾	10900 23950	11.22 36.83
0			28850⁽²⁾ 69200⁽²⁾	28050 60200	27300⁽²⁾ 59100⁽²⁾	19800 42600	22200⁽²⁾ 47950⁽²⁾	15050 32400	18200⁽²⁾ 39100⁽²⁾	11950 25700	16950⁽²⁾ 37350⁽²⁾	11250 24750	10.95 35.91
-1.5 m -5.0 ft			31500⁽²⁾ 68500⁽²⁾	28150 60400	25850⁽²⁾ 56000⁽²⁾	19750 42450	21050⁽²⁾ 45400⁽²⁾	15000 32400			16650⁽²⁾ 36700⁽²⁾	12100 26700	10.44 34.23
-3.0 m -10.0 ft	31550⁽²⁾ 69000⁽²⁾		27950⁽²⁾ 60650⁽²⁾		23200⁽²⁾ 50050⁽²⁾	19950 42850	18500⁽²⁾ 39450⁽²⁾	15150 32700			15950⁽²⁾ 35100⁽²⁾	13750 30400	9.68 31.66
-4.5 m -15.0 ft	25550⁽²⁾ 55300⁽²⁾		22700⁽²⁾ 48800⁽²⁾		18550⁽²⁾ 39350⁽²⁾						14450⁽²⁾ 31550⁽²⁾		8.58 27.95

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 18
390D L Excavator with a general boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft					21400⁽²⁾ 47300⁽²⁾						17650⁽²⁾ 39300⁽²⁾		8.15 26.19
9.0 m 30.0 ft					21450⁽²⁾ 46800⁽²⁾		20050⁽²⁾ 41750⁽²⁾	19000 40650			16450⁽²⁾ 36400⁽²⁾		9.38 30.44
7.5 m 25.0 ft					22700⁽²⁾ 49200⁽²⁾		20300⁽²⁾ 44250⁽²⁾	18750 40300			15900⁽²⁾ 35100⁽²⁾	15000 33450	10.23 33.39
6.0 m 20.0 ft			30550⁽²⁾ 65650⁽²⁾		24600⁽²⁾ 53150⁽²⁾	24050 51900	21200⁽²⁾ 46000⁽²⁾	18200 39200	19150⁽²⁾ 41050⁽²⁾	14200 30450	15800⁽²⁾ 34800⁽²⁾	13500 29850	10.81 35.38
4.5 m 15.0 ft					26650⁽²⁾ 57550⁽²⁾	22900 49400	22300⁽²⁾ 48300⁽²⁾	17550 37800	19550⁽²⁾ 42500⁽²⁾	13900 29850	16050⁽²⁾ 35300⁽²⁾	12600 27750	11.16 36.58
3.0 m 10.0 ft					28250⁽²⁾ 61050⁽²⁾	21900 47200	23200⁽²⁾ 50300⁽²⁾	16950 36500	19950⁽²⁾ 43250⁽²⁾	13550 29150	16650⁽²⁾ 36600⁽²⁾	12150 26750	11.29 37.05
1.5 m 5.0 ft					28950⁽²⁾ 62650⁽²⁾	21200 45750	23700⁽²⁾ 51300⁽²⁾	16450 35500	19950 42900	13250 28550	17650⁽²⁾ 38800⁽²⁾	12050 26600	11.22 36.84
0			30450⁽²⁾ 72700⁽²⁾	29050 62500	28550⁽²⁾ 61900⁽²⁾	20900 45000	23500⁽²⁾ 50850⁽²⁾	16200 34900	19550⁽²⁾ 42100⁽²⁾	13100 28250	18300⁽²⁾ 40350⁽²⁾	12400 27350	10.95 35.91
-1.5 m -5.0 ft			32700⁽²⁾ 71200⁽²⁾	29150 62700	27150⁽²⁾ 58800⁽²⁾	20800 44850	22350⁽²⁾ 48300⁽²⁾	16100 34750			18000⁽²⁾ 39650⁽²⁾	13250 29250	10.44 34.23
-3.0 m -10.0 ft	32750⁽²⁾ 71700⁽²⁾		29200⁽²⁾ 63400⁽²⁾	29200⁽²⁾ 63400	24450⁽²⁾ 52850⁽²⁾	21000 45250	19850⁽²⁾ 42350⁽²⁾	16300 35200			17300⁽²⁾ 38050⁽²⁾	14900 32950	9.68 31.66
-4.5 m -15.0 ft	26750⁽²⁾ 57950⁽²⁾		23950⁽²⁾ 51550⁽²⁾		19850⁽²⁾ 42200⁽²⁾						15750⁽²⁾ 34450⁽²⁾		8.58 27.95

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 19
390D L Excavator with a general boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft					20000⁽²⁾ 44150⁽²⁾						16050⁽²⁾ 35800⁽²⁾		8.15 26.19
9.0 m 30.0 ft					20050⁽²⁾ 43750⁽²⁾		18600⁽²⁾ 38350⁽²⁾	17600 37600			14900⁽²⁾ 32950⁽²⁾		9.38 30.43
7.5 m 25.0 ft					21350⁽²⁾ 46200⁽²⁾		18900⁽²⁾ 41200⁽²⁾	17400 37300			14400⁽²⁾ 31750⁽²⁾	13650 30450	10.23 33.39
6.0 m 20.0 ft			29300⁽²⁾ 62850⁽²⁾		23250⁽²⁾ 50250⁽²⁾	22700 48950	19850⁽²⁾ 43050⁽²⁾	16850 36250	17750⁽²⁾ 37800⁽²⁾	12850 27500	14300⁽²⁾ 31500⁽²⁾	12150 26900	10.81 35.38
4.5 m 15.0 ft					25350⁽²⁾ 54700⁽²⁾	21550 46500	20950⁽²⁾ 45350⁽²⁾	16250 34900	18200⁽²⁾ 39500⁽²⁾	12550 26950	14600⁽²⁾ 32100⁽²⁾	11250 24850	11.16 36.58
3.0 m 10.0 ft					26950⁽²⁾ 58250⁽²⁾	20600 44350	21900⁽²⁾ 47400⁽²⁾	15650 33650	18600⁽²⁾ 40250⁽²⁾	12250 26250	15200⁽²⁾ 33400⁽²⁾	10800 23800	11.29 37.05
1.5 m 5.0 ft					27650⁽²⁾ 59850⁽²⁾	19900 42900	22400⁽²⁾ 48400⁽²⁾	15150 32650	18550 39900	11950 25700	16250⁽²⁾ 35700⁽²⁾	10750 23700	11.22 36.83
0			28850⁽²⁾ 69200⁽²⁾	27750 59550	27300⁽²⁾ 59100⁽²⁾	19600 42150	22200⁽²⁾ 47950⁽²⁾	14900 32050	18200⁽²⁾ 39100⁽²⁾	11800 25400	16950⁽²⁾ 37350⁽²⁾	11100 24450	10.95 35.91
-1.5 m -5.0 ft			31500⁽²⁾ 68500⁽²⁾	27850 59750	25850⁽²⁾ 56000⁽²⁾	19500 42000	21050⁽²⁾ 45400⁽²⁾	14850 31900			16650⁽²⁾ 36700⁽²⁾	11950 26350	10.44 34.23
-3.0 m -10.0 ft	31550⁽²⁾ 69000⁽²⁾		27950⁽²⁾ 60650⁽²⁾	27950⁽²⁾ 60450	23200⁽²⁾ 50050⁽²⁾	19700 42400	18500⁽²⁾ 39450⁽²⁾	15000 32300			15950⁽²⁾ 35100⁽²⁾	13550 30050	9.68 31.66
-4.5 m -15.0 ft	25550⁽²⁾ 55300⁽²⁾		22700⁽²⁾ 48800⁽²⁾		18550⁽²⁾ 39350⁽²⁾						14450⁽²⁾ 31550⁽²⁾		8.58 27.95

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 20
390D L Excavator with a general boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		10.5 m 36.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft					21400⁽²⁾ 47300⁽²⁾						17650⁽²⁾ 39300⁽²⁾		8.15 26.19
9.0 m 30.0 ft					21450⁽²⁾ 46800⁽²⁾		20050⁽²⁾ 41750⁽²⁾	18850 40300			16450⁽²⁾ 36400⁽²⁾		9.38 30.44
7.5 m 25.0 ft					22700⁽²⁾ 49200⁽²⁾		20300⁽²⁾ 44250⁽²⁾	18550 39900			15900⁽²⁾ 35100⁽²⁾	14900 33100	10.23 33.39
6.0 m 20.0 ft			30550⁽²⁾ 65650⁽²⁾		24600⁽²⁾ 53150⁽²⁾	23850 51400	21200⁽²⁾ 46000⁽²⁾	18000 38800	19150⁽²⁾ 41050⁽²⁾	14050 30150	15800⁽²⁾ 34800⁽²⁾	13350 29550	10.81 35.38
4.5 m 15.0 ft					26650⁽²⁾ 57550⁽²⁾	22650 48900	22300⁽²⁾ 48300⁽²⁾	17350 37450	19550⁽²⁾ 42500⁽²⁾	13750 29550	16050⁽²⁾ 35300⁽²⁾	12450 27500	11.16 36.58
3.0 m 10.0 ft					28250⁽²⁾ 61050⁽²⁾	21650 46750	23200⁽²⁾ 50300⁽²⁾	16750 36100	19950⁽²⁾ 43100	13400 28850	16650⁽²⁾ 36600⁽²⁾	12000 26450	11.29 37.05
1.5 m 5.0 ft					28950⁽²⁾ 62650⁽²⁾	21000 45250	23700⁽²⁾ 51300⁽²⁾	16300 35100	19700 42450	13100 28250	17650⁽²⁾ 38800⁽²⁾	11950 26300	11.22 36.84
0			30450⁽²⁾ 72700⁽²⁾	28750 61850	28550⁽²⁾ 61900⁽²⁾	20650 44500	23500⁽²⁾ 50850⁽²⁾	16000 34500	19550⁽²⁾ 42100⁽²⁾	12950 27950	18300⁽²⁾ 40350⁽²⁾	12300 27050	10.95 35.91
-1.5 m -5.0 ft			32700⁽²⁾ 71200⁽²⁾	28850 62050	27150⁽²⁾ 58800⁽²⁾	20600 44350	22350⁽²⁾ 48300⁽²⁾	15950 34350			18000⁽²⁾ 39650⁽²⁾	13100 28950	10.44 34.23
-3.0 m -10.0 ft	32750⁽²⁾ 71700⁽²⁾		29200⁽²⁾ 63400⁽²⁾	29200 62700	24450⁽²⁾ 52850⁽²⁾	20800 44750	19850⁽²⁾ 42350⁽²⁾	16100 34800			17300⁽²⁾ 38050⁽²⁾	14700 32600	9.68 31.66
-4.5 m -15.0 ft	26750⁽²⁾ 57950⁽²⁾		23950⁽²⁾ 51550⁽²⁾		19850⁽²⁾ 42200⁽²⁾						15750⁽²⁾ 34450⁽²⁾		8.58 27.95

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Mass Boom 7.25 m (9 inch)

Show/hide table




Illustration 4	g02143628
Lift Point: Lifting eye on power link (H) Lift point Height (F) Lifting capacity over the front or rear of the machine (S) Lifting capacity over the side of the machine (R) Lift point radius

3.4 m (11 ft 2 inch) Stick

Show/hide table

Table 21
390D L Excavator with a mass boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 900 mm (35 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											17400⁽²⁾ 38850⁽²⁾		6.96 22.17
9.0 m 30.0 ft							21650⁽²⁾ 45800⁽²⁾				15900⁽²⁾ 35300⁽²⁾		8.36 27.07
7.5 m 25.0 ft							23500⁽²⁾ 51150⁽²⁾		18950⁽²⁾ 37100⁽²⁾		15350⁽²⁾ 33850⁽²⁾		9.32 30.36
6.0 m 20.0 ft					29350⁽²⁾ 63350⁽²⁾		24900⁽²⁾ 54050⁽²⁾		22200⁽²⁾ 48350⁽²⁾	18900 40600	15250⁽²⁾ 33600⁽²⁾		9.95 32.55
4.5 m 15.0 ft			45600⁽²⁾ 97750⁽²⁾		33050⁽²⁾ 71300⁽²⁾		26800⁽²⁾ 58000⁽²⁾	24350 52450	23000⁽²⁾ 50000⁽²⁾	18350 39500	15600⁽²⁾ 34300⁽²⁾	14700 32500	10.33 33.84
3.0 m 10.0 ft					36200⁽²⁾ 78250⁽²⁾	32500 70000	28500⁽²⁾ 61700⁽²⁾	23300 50250	23850⁽²⁾ 51700⁽²⁾	17800 38300	16350⁽²⁾ 35900⁽²⁾	14100 31100	10.47 34.36
1.5 m 5.0 ft					37700⁽²⁾ 81550⁽²⁾	31150 67100	29500⁽²⁾ 63850⁽²⁾	22500 48450	24250⁽²⁾ 52500⁽²⁾	17300 37250	17600⁽²⁾ 38650⁽²⁾	14050 30900	10.40 34.12
0			27950⁽²⁾ 64650⁽²⁾		37150⁽²⁾ 80500⁽²⁾	30500 65650	29300⁽²⁾ 63500⁽²⁾	22000 47350	23800⁽²⁾ 51450⁽²⁾	17000 36550	19550⁽²⁾ 43100⁽²⁾	14500 31900	10.10 33.12
-1.5 m -5.0 ft	23550⁽²⁾ 53150⁽²⁾		41700⁽²⁾ 94900⁽²⁾		34700⁽²⁾ 75200⁽²⁾	30350 65250	27650⁽²⁾ 59800⁽²⁾	21800 46900	22000⁽²⁾ 47200⁽²⁾	16900 36450	19800⁽²⁾ 43650⁽²⁾	15650 34500	9.55 31.28
-3.0 m -10.0 ft	38700⁽²⁾ 87400⁽²⁾		37000⁽²⁾ 80250⁽²⁾		30150⁽²⁾ 65150⁽²⁾		24000⁽²⁾ 51450⁽²⁾	21950 47300			18800⁽²⁾ 41300⁽²⁾	17950 39750	8.70 28.44
-4.5 m -15.0 ft			27250⁽²⁾ 58400⁽²⁾		22550⁽²⁾ 47850⁽²⁾						16350⁽²⁾ 35550⁽²⁾		7.46 24.23

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 22
390D L Excavator with a mass boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											15800⁽²⁾ 35400⁽²⁾		6.96 22.17
9.0 m 30.0 ft							20150⁽²⁾ 42450⁽²⁾				14400⁽²⁾ 31900⁽²⁾		8.36 27.07
7.5 m 25.0 ft							22100⁽²⁾ 48100⁽²⁾		17500⁽²⁾ 33800⁽²⁾		13850⁽²⁾ 30550⁽²⁾		9.32 30.36
6.0 m 20.0 ft					28000⁽²⁾ 60450⁽²⁾		23550⁽²⁾ 51100⁽²⁾		20800⁽²⁾ 45300⁽²⁾	17500 37500	13800⁽²⁾ 30350⁽²⁾		9.95 32.55
4.5 m 15.0 ft			44400⁽²⁾ 95050⁽²⁾		31750⁽²⁾ 68500⁽²⁾		25450⁽²⁾ 55100⁽²⁾	22950 49350	21650⁽²⁾ 47050⁽²⁾	17000 36450	14150⁽²⁾ 31100⁽²⁾	13350 29450	10.33 33.84
3.0 m 10.0 ft					34950⁽²⁾ 75450⁽²⁾	31050 66850	27200⁽²⁾ 58850⁽²⁾	21950 47200	22500⁽²⁾ 48750⁽²⁾	16400 35300	14900⁽²⁾ 32800⁽²⁾	12750 28100	10.47 34.36
1.5 m 5.0 ft					36450⁽²⁾ 78850⁽²⁾	29750 64000	28200⁽²⁾ 61000⁽²⁾	21100 45450	22900⁽²⁾ 49550⁽²⁾	15950 34250	16200⁽²⁾ 35650⁽²⁾	12650 27900	10.40 34.12
0			26400⁽²⁾ 61150⁽²⁾		35900⁽²⁾ 77800⁽²⁾	29100 62500	28050⁽²⁾ 60650⁽²⁾	20600 44300	22500⁽²⁾ 48550⁽²⁾	15600 33600	18250⁽²⁾ 40150⁽²⁾	13100 28900	10.10 33.12
-1.5 m -5.0 ft	22050⁽²⁾ 49900⁽²⁾		40100⁽²⁾ 92050⁽²⁾		33450⁽²⁾ 72450⁽²⁾	28900 62100	26400⁽²⁾ 57000⁽²⁾	20400 43900	20700⁽²⁾ 44300⁽²⁾	15550 33450	18500⁽²⁾ 40700⁽²⁾	14250 31500	9.55 31.28
-3.0 m -10.0 ft	37150⁽²⁾ 84000⁽²⁾		35800⁽²⁾ 77600⁽²⁾		28900⁽²⁾ 62400⁽²⁾		22700⁽²⁾ 48600⁽²⁾	20550 44250			17500⁽²⁾ 38400⁽²⁾	16550 36700	8.70 28.44
-4.5 m -15.0 ft			26100⁽²⁾ 55750⁽²⁾		21300⁽²⁾ 45100⁽²⁾						15050⁽²⁾ 32700⁽²⁾		7.46 24.23

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 23
390D L Excavator with a mass boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											17400⁽²⁾ 38850⁽²⁾		6.96 22.17
9.0 m 30.0 ft							21650⁽²⁾ 45800⁽²⁾				15900⁽²⁾ 35300⁽²⁾		8.36 27.07
7.5 m 25.0 ft							23500⁽²⁾ 51150⁽²⁾		18950⁽²⁾ 37100⁽²⁾		15350⁽²⁾ 33850⁽²⁾		9.32 30.36
6.0 m 20.0 ft					29350⁽²⁾ 63350⁽²⁾		24900⁽²⁾ 54050⁽²⁾	24900⁽²⁾ 54000	22200⁽²⁾ 48350⁽²⁾	18650 40150	15250⁽²⁾ 33600⁽²⁾		9.95 32.55
4.5 m 15.0 ft			45600⁽²⁾ 97750⁽²⁾		33050⁽²⁾ 71300⁽²⁾		26800⁽²⁾ 58000⁽²⁾	24050 51850	23000⁽²⁾ 50000⁽²⁾	18150 39050	15600⁽²⁾ 34300⁽²⁾	14500 32100	10.33 33.84
3.0 m 10.0 ft					36200⁽²⁾ 78250⁽²⁾	32100 69150	28500⁽²⁾ 61700⁽²⁾	23050 49650	23850⁽²⁾ 51700⁽²⁾	17550 37850	16350⁽²⁾ 35900⁽²⁾	13950 30700	10.47 34.36
1.5 m 5.0 ft					37700⁽²⁾ 81550⁽²⁾	30800 66300	29500⁽²⁾ 63850⁽²⁾	22200 47850	24250⁽²⁾ 52500⁽²⁾	17100 36800	17600⁽²⁾ 38650⁽²⁾	13850 30500	10.40 34.12
0			27950⁽²⁾ 64650⁽²⁾		37150⁽²⁾ 80500⁽²⁾	30100 64800	29300⁽²⁾ 63500⁽²⁾	21700 46700	23800⁽²⁾ 51450⁽²⁾	16750 36100	19550⁽²⁾ 43100⁽²⁾	14300 31450	10.10 33.12
-1.5 m -5.0 ft	23550⁽²⁾ 53150⁽²⁾		41700⁽²⁾ 94900⁽²⁾		34700⁽²⁾ 75200⁽²⁾	29950 64400	27650⁽²⁾ 59800⁽²⁾	21500 46300	22000⁽²⁾ 47200⁽²⁾	16650 35950	19800⁽²⁾ 43650⁽²⁾	15400 34050	9.55 31.28
-3.0 m -10.0 ft	38700⁽²⁾ 87400⁽²⁾		37000⁽²⁾ 80250⁽²⁾		30150⁽²⁾ 65150⁽²⁾	30150⁽²⁾ 64900	24000⁽²⁾ 51450⁽²⁾	21650 46650			18800⁽²⁾ 41300⁽²⁾	17700 39250	8.70 28.44
-4.5 m -15.0 ft			27250⁽²⁾ 58400⁽²⁾		22550⁽²⁾ 47850⁽²⁾						16350⁽²⁾ 35550⁽²⁾		7.46 24.23

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 24
390D L Excavator with a mass boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											15800⁽²⁾ 35400⁽²⁾		6.95 22.17
9.0 m 30.0 ft							20150⁽²⁾ 42450⁽²⁾				14400⁽²⁾ 31900⁽²⁾		8.36 27.07
7.5 m 25.0 ft							22100⁽²⁾ 48100⁽²⁾		17500⁽²⁾ 33800⁽²⁾		13850⁽²⁾ 30550⁽²⁾		9.32 30.36
6.0 m 20.0 ft					28000⁽²⁾ 60450⁽²⁾		23550⁽²⁾ 51100⁽²⁾	23550⁽²⁾ 50950	20800⁽²⁾ 45300⁽²⁾	17300 37100	13800⁽²⁾ 30350⁽²⁾		9.95 32.55
4.5 m 15.0 ft			44400⁽²⁾ 95050⁽²⁾		31750⁽²⁾ 68500⁽²⁾		25450⁽²⁾ 55100⁽²⁾	22700 48850	21650⁽²⁾ 47050⁽²⁾	16800 36100	14150⁽²⁾ 31100⁽²⁾	13200 29100	10.33 33.84
3.0 m 10.0 ft					34950⁽²⁾ 75450⁽²⁾	30750 66200	27200⁽²⁾ 58850⁽²⁾	21700 46700	22500⁽²⁾ 48750⁽²⁾	16250 34900	14900⁽²⁾ 32800⁽²⁾	12600 27750	10.47 34.36
1.5 m 5.0 ft					36450⁽²⁾ 78850⁽²⁾	29450 63350	28200⁽²⁾ 61000⁽²⁾	20900 44950	22900⁽²⁾ 49550⁽²⁾	15750 33900	16200⁽²⁾ 35650⁽²⁾	12500 27550	10.40 34.12
0			26400⁽²⁾ 61150⁽²⁾		35900⁽²⁾ 77800⁽²⁾	28800 61850	28050⁽²⁾ 60650⁽²⁾	20400 43850	22500⁽²⁾ 48550⁽²⁾	15450 33200	18250⁽²⁾ 40150⁽²⁾	12950 28550	10.10 33.12
-1.5 m -5.0 ft	22050⁽²⁾ 49900⁽²⁾		40100⁽²⁾ 92050⁽²⁾		33450⁽²⁾ 72450⁽²⁾	28600 61450	26400⁽²⁾ 57000⁽²⁾	20200 43400	20700⁽²⁾ 44300⁽²⁾	15350 33050	18500⁽²⁾ 40700⁽²⁾	14100 31150	9.55 31.28
-3.0 m -10.0 ft	37150⁽²⁾ 84000⁽²⁾		35800⁽²⁾ 77600⁽²⁾		28900⁽²⁾ 62400⁽²⁾	28850 61950	22700⁽²⁾ 48600⁽²⁾	20350 43750			17500⁽²⁾ 38400⁽²⁾	16400 36300	8.70 28.44
-4.5 m -15.0 ft			26100⁽²⁾ 55750⁽²⁾		21300⁽²⁾ 45100⁽²⁾						15050⁽²⁾ 32700⁽²⁾		7.46 24.23

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 25
390D L Excavator with a mass boom, a 3.4 m (11 ft 2 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											17400⁽²⁾ 38850⁽²⁾		6.96 22.17
9.0 m 30.0 ft							21650⁽²⁾ 45800⁽²⁾				15900⁽²⁾ 35300⁽²⁾		8.36 27.07
7.5 m 25.0 ft							23500⁽²⁾ 51150⁽²⁾		18950⁽²⁾ 37100⁽²⁾	18850 37100⁽²⁾	15350⁽²⁾ 33850⁽²⁾		9.32 30.36
6.0 m 20.0 ft					29350⁽²⁾ 63350⁽²⁾		24900⁽²⁾ 54050⁽²⁾	24850 53550	22200⁽²⁾ 48350⁽²⁾	18500 39750	15250⁽²⁾ 33600⁽²⁾		9.95 32.55
4.5 m 15.0 ft			45600⁽²⁾ 97750⁽²⁾		33050⁽²⁾ 71300⁽²⁾		26800⁽²⁾ 58000⁽²⁾	23850 51350	23000⁽²⁾ 50000⁽²⁾	17950 38650	15600⁽²⁾ 34300⁽²⁾	14400 31750	10.33 33.84
3.0 m 10.0 ft					36200⁽²⁾ 78250⁽²⁾	31800 68500	28500⁽²⁾ 61700⁽²⁾	22800 49150	23850⁽²⁾ 51700⁽²⁾	17400 37450	16350⁽²⁾ 35900⁽²⁾	13800 30400	10.47 34.36
1.5 m 5.0 ft					37700⁽²⁾ 81550⁽²⁾	30500 65650	29500⁽²⁾ 63850⁽²⁾	22000 47400	24250⁽²⁾ 52500⁽²⁾	16900 36400	17600⁽²⁾ 38650⁽²⁾	13700 30150	10.40 34.12
0			27950⁽²⁾ 64650⁽²⁾		37150⁽²⁾ 80500⁽²⁾	29800 64150	29300⁽²⁾ 63500⁽²⁾	21450 46250	23800⁽²⁾ 51450⁽²⁾	16600 35700	19550⁽²⁾ 43100⁽²⁾	14150 31150	10.10 33.12
-1.5 m -5.0 ft	23550⁽²⁾ 53150⁽²⁾		41700⁽²⁾ 94900⁽²⁾		34700⁽²⁾ 75200⁽²⁾	29650 63750	27650⁽²⁾ 59800⁽²⁾	21300 45850	22000⁽²⁾ 47200⁽²⁾	16500 35550	19800⁽²⁾ 43650⁽²⁾	15250 33650	9.55 31.28
-3.0 m -10.0 ft	38700⁽²⁾ 87400⁽²⁾		37000⁽²⁾ 80250⁽²⁾		30150⁽²⁾ 65150⁽²⁾	29850 64250	24000⁽²⁾ 51450⁽²⁾	21450 46200			18800⁽²⁾ 41300⁽²⁾	17500 38800	8.70 28.44
-4.5 m -15.0 ft			27250⁽²⁾ 58400⁽²⁾		22550⁽²⁾ 47850⁽²⁾						16350⁽²⁾ 35550⁽²⁾		7.46 24.23

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

2.92 m (9 ft 7 inch) Stick

Show/hide table

Table 26
390D L Excavator with a mass boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 900 mm (35 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											20950⁽²⁾ 46200⁽²⁾		6.27 20.57
9.0 m 30.0 ft							22600⁽²⁾ 44200⁽²⁾				18950⁽²⁾ 42050⁽²⁾		7.81 25.22
7.5 m 25.0 ft							24400⁽²⁾ 53250⁽²⁾				18200⁽²⁾ 40150⁽²⁾		8.82 28.73
6.0 m 20.0 ft			39800⁽²⁾ 85300⁽²⁾		30550⁽²⁾ 66000⁽²⁾		25700⁽²⁾ 55750⁽²⁾	24950 53700	22750⁽²⁾ 49650⁽²⁾	18550 39850	18100⁽²⁾ 39850⁽²⁾	16950 37550	9.49 31.03
4.5 m 15.0 ft					34100⁽²⁾ 73500⁽²⁾	33650 72550	27400⁽²⁾ 59300⁽²⁾	23950 51550	23400⁽²⁾ 50850⁽²⁾	18050 38900	18550⁽²⁾ 40800⁽²⁾	15550 34350	9.89 32.39
3.0 m 10.0 ft					36800⁽²⁾ 79450⁽²⁾	31850 68650	28850⁽²⁾ 62400⁽²⁾	22950 49450	24000⁽²⁾ 52100⁽²⁾	17550 37750	19500⁽²⁾ 42900⁽²⁾	14850 32800	10.04 32.93
1.5 m 5.0 ft					37550⁽²⁾ 81400⁽²⁾	30750 66200	29450⁽²⁾ 63800⁽²⁾	22200 47850	24150⁽²⁾ 52250⁽²⁾	17100 36850	21150⁽²⁾ 46500⁽²⁾	14800 32600	9.96 32.68
0			25950⁽²⁾ 60500⁽²⁾		36300⁽²⁾ 78850⁽²⁾	30250 65100	28850⁽²⁾ 62500⁽²⁾	21800 46950	23300⁽²⁾ 50250⁽²⁾	16850 36350	20950⁽²⁾ 46200⁽²⁾	15350 33800	9.64 31.64
-1.5 m -5.0 ft	24750⁽²⁾ 54600⁽²⁾		40350⁽²⁾ 88100⁽²⁾		33250⁽²⁾ 72100⁽²⁾	30250 65000	26650⁽²⁾ 57600⁽²⁾	21700 46750	20650⁽²⁾ 45500⁽²⁾	16900 37250	20300⁽²⁾ 44750⁽²⁾	16750 36950	9.07 29.70
-3.0 m -10.0 ft			33300⁽²⁾ 72350⁽²⁾		27950⁽²⁾ 60350⁽²⁾		22050⁽²⁾ 46950⁽²⁾	22000 46950⁽²⁾			18850⁽²⁾ 41400⁽²⁾		8.17 26.69
-4.5 m -15.0 ft					18900⁽²⁾ 39550⁽²⁾						15600⁽²⁾ 36200⁽²⁾		6.77 21.22

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 27
390D L Excavator with a mass boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											19350⁽²⁾ 42650⁽²⁾		6.27 20.57
9.0 m 30.0 ft							21050⁽²⁾ 40750⁽²⁾				17400⁽²⁾ 38600⁽²⁾		7.81 25.22
7.5 m 25.0 ft							23050⁽²⁾ 50150⁽²⁾				16700⁽²⁾ 36800⁽²⁾		8.82 28.73
6.0 m 20.0 ft			38550⁽²⁾ 82550⁽²⁾		29250⁽²⁾ 63150⁽²⁾		24350⁽²⁾ 52750⁽²⁾	23500 50500	21400⁽²⁾ 46600⁽²⁾	17150 36700	16650⁽²⁾ 36600⁽²⁾	15500 34450	9.49 31.03
4.5 m 15.0 ft					32800⁽²⁾ 70700⁽²⁾	32200 69400	26050⁽²⁾ 56400⁽²⁾	22500 48450	22050⁽²⁾ 47850⁽²⁾	16650 35800	17100⁽²⁾ 37600⁽²⁾	14150 31250	9.89 32.39
3.0 m 10.0 ft					35550⁽²⁾ 76700⁽²⁾	30450 65550	27550⁽²⁾ 59550⁽²⁾	21550 46400	22700⁽²⁾ 49100⁽²⁾	16150 34750	18100⁽²⁾ 39750⁽²⁾	13500 29750	10.04 32.93
1.5 m 5.0 ft					36300⁽²⁾ 78650⁽²⁾	29300 63050	28200⁽²⁾ 60950⁽²⁾	20850 44800	22800⁽²⁾ 49300⁽²⁾	15750 33850	19750⁽²⁾ 43450⁽²⁾	13450 29550	9.96 32.68
0			24400⁽²⁾ 57100⁽²⁾		35100⁽²⁾ 76100⁽²⁾	28850 61950	27600⁽²⁾ 59650⁽²⁾	20400 43900	21950⁽²⁾ 47300⁽²⁾	15500 33350	19600⁽²⁾ 43250⁽²⁾	14000 30800	9.64 31.64
-1.5 m -5.0 ft	23300⁽²⁾ 51350⁽²⁾		39150⁽²⁾ 85450⁽²⁾		32000⁽²⁾ 69350⁽²⁾	28800 61900	25400⁽²⁾ 54750⁽²⁾	20350 43700	19300⁽²⁾ 42550⁽²⁾	15550 34300	19000⁽²⁾ 41800⁽²⁾	15400 33950	9.07 29.70
-3.0 m -10.0 ft			32100⁽²⁾ 69700⁽²⁾		26700⁽²⁾ 57600⁽²⁾		20750⁽²⁾ 44100⁽²⁾	20600 44100⁽²⁾			17550⁽²⁾ 38500⁽²⁾		8.17 26.69
-4.5 m -15.0 ft					17650⁽²⁾ 36800⁽²⁾						14300⁽²⁾ 33350⁽²⁾		6.77 21.22

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 28
390D L Excavator with a mass boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 750 mm (30 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											20950⁽²⁾ 46200⁽²⁾		6.27 20.57
9.0 m 30.0 ft							22600⁽²⁾ 44200⁽²⁾				18950⁽²⁾ 42050⁽²⁾		7.81 25.22
7.5 m 25.0 ft							24400⁽²⁾ 53250⁽²⁾				18200⁽²⁾ 40150⁽²⁾		8.82 28.73
6.0 m 20.0 ft			39800⁽²⁾ 85300⁽²⁾		30550⁽²⁾ 66000⁽²⁾		25700⁽²⁾ 55750⁽²⁾	24650 53050	22750⁽²⁾ 49650⁽²⁾	18350 39350	18100⁽²⁾ 39850⁽²⁾	16700 37100	9.49 31.03
4.5 m 15.0 ft					34100⁽²⁾ 73500⁽²⁾	33250 71750	27400⁽²⁾ 59300⁽²⁾	23650 50950	23400⁽²⁾ 50850⁽²⁾	17850 38400	18550⁽²⁾ 40800⁽²⁾	15350 33900	9.89 32.39
3.0 m 10.0 ft					36800⁽²⁾ 79450⁽²⁾	31450 67850	28850⁽²⁾ 62400⁽²⁾	22650 48850	24000⁽²⁾ 52100⁽²⁾	17300 37300	19500⁽²⁾ 42900⁽²⁾	14700 32350	10.04 32.93
1.5 m 5.0 ft					37550⁽²⁾ 81400⁽²⁾	30350 65350	29450⁽²⁾ 63800⁽²⁾	21900 47250	24150⁽²⁾ 52250⁽²⁾	16900 36350	21150⁽²⁾ 46500⁽²⁾	14600 32150	9.96 32.68
0			25950⁽²⁾ 60500⁽²⁾		36300⁽²⁾ 78850⁽²⁾	29850 64250	28850⁽²⁾ 62500⁽²⁾	21500 46300	23300⁽²⁾ 50250⁽²⁾	16650 35850	20950⁽²⁾ 46200⁽²⁾	15150 33350	9.64 31.64
-1.5 m -5.0 ft	24750⁽²⁾ 54600⁽²⁾		40350⁽²⁾ 88100⁽²⁾		33250⁽²⁾ 72100⁽²⁾	29850 64200	26650⁽²⁾ 57600⁽²⁾	21400 46150	20650⁽²⁾ 45500⁽²⁾	16700 36800	20300⁽²⁾ 44750⁽²⁾	16550 36500	9.07 29.70
-3.0 m -10.0 ft			33300⁽²⁾ 72350⁽²⁾		27950⁽²⁾ 60350⁽²⁾		22050⁽²⁾ 46950⁽²⁾	21700 46850			18850⁽²⁾ 41400⁽²⁾		8.17 26.69
-4.5 m -15.0 ft					18900⁽²⁾ 39550⁽²⁾						15600⁽²⁾ 36200⁽²⁾		6.77 21.22

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 29
390D L Excavator with a mass boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, a quick coupler, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											19350⁽²⁾ 42650⁽²⁾		6.27 20.57
9.0 m 30.0 ft							21050⁽²⁾ 40750⁽²⁾				17400⁽²⁾ 38600⁽²⁾		7.81 25.22
7.5 m 25.0 ft							23050⁽²⁾ 50150⁽²⁾				16700⁽²⁾ 36800⁽²⁾		8.82 28.73
6.0 m 20.0 ft			38550⁽²⁾ 82550⁽²⁾		29250⁽²⁾ 63150⁽²⁾		24350⁽²⁾ 52750⁽²⁾	23250 50000	21400⁽²⁾ 46600⁽²⁾	16950 36350	16650⁽²⁾ 36600⁽²⁾	15350 34100	9.49 31.03
4.5 m 15.0 ft					32800⁽²⁾ 70700⁽²⁾	31900 68750	26050⁽²⁾ 56400⁽²⁾	22300 48000	22050⁽²⁾ 47850⁽²⁾	16500 35400	17100⁽²⁾ 37600⁽²⁾	14000 30900	9.89 32.39
3.0 m 10.0 ft					35550⁽²⁾ 76700⁽²⁾	30150 64900	27550⁽²⁾ 59550⁽²⁾	21350 45950	22700⁽²⁾ 49100⁽²⁾	16000 34350	18100⁽²⁾ 39750⁽²⁾	13350 29400	10.04 32.93
1.5 m 5.0 ft					36300⁽²⁾ 78650⁽²⁾	29000 62400	28200⁽²⁾ 60950⁽²⁾	20600 44350	22800⁽²⁾ 49300⁽²⁾	15550 33450	19750⁽²⁾ 43450⁽²⁾	13250 29250	9.96 32.68
0			24400⁽²⁾ 57100⁽²⁾		35100⁽²⁾ 76100⁽²⁾	28550 61300	27600⁽²⁾ 59650⁽²⁾	20200 43450	21950⁽²⁾ 47300⁽²⁾	15300 32950	19600⁽²⁾ 43250⁽²⁾	13850 30450	9.64 31.64
-1.5 m -5.0 ft	23300⁽²⁾ 51350⁽²⁾		39150⁽²⁾ 85450⁽²⁾		32000⁽²⁾ 69350⁽²⁾	28500 61250	25400⁽²⁾ 54750⁽²⁾	20100 43250	19300⁽²⁾ 42550⁽²⁾	15350 33850	19000⁽²⁾ 41800⁽²⁾	15200 33550	9.07 29.70
-3.0 m -10.0 ft			32100⁽²⁾ 69700⁽²⁾		26700⁽²⁾ 57600⁽²⁾		20750⁽²⁾ 44100⁽²⁾	20400 43950			17550⁽²⁾ 38500⁽²⁾		8.17 26.69
-4.5 m -15.0 ft					17650⁽²⁾ 36800⁽²⁾						14300⁽²⁾ 33350⁽²⁾		6.77 21.22

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 30
390D L Excavator with a mass boom, a 2.92 m (9 ft 7 inch) stick, a 12400 kg (27340 lb) counterweight, with no bucket, and 650 mm (26 inch) double grouser track shoes⁽¹⁾ All lifting capacities are in kilograms and pounds.
H	R
	3.0 m 10.0 ft		4.5 m 15.0 ft		6.0 m 20.0 ft		7.5 m 25.0 ft		9.0 m 30.0 ft		Maximum Radius
	F	S	F	S	F	S	F	S	F	S	F	S	m ft
10.5 m 35.0 ft											20950⁽²⁾ 46200⁽²⁾		6.27 20.57
9.0 m 30.0 ft							22600⁽²⁾ 44200⁽²⁾				18950⁽²⁾ 42050⁽²⁾		7.81 25.22
7.5 m 25.0 ft							24400⁽²⁾ 53250⁽²⁾				18200⁽²⁾ 40150⁽²⁾		8.82 28.73
6.0 m 20.0 ft			39800⁽²⁾ 85300⁽²⁾		30550⁽²⁾ 66000⁽²⁾		25700⁽²⁾ 55750⁽²⁾	24450 52600	22750⁽²⁾ 49650⁽²⁾	18150 39000	18100⁽²⁾ 39850⁽²⁾	16550 36750	9.49 31.03
4.5 m 15.0 ft					34100⁽²⁾ 73500⁽²⁾	32950 71100	27400⁽²⁾ 59300⁽²⁾	23400 50450	23400⁽²⁾ 50850⁽²⁾	17650 38000	18550⁽²⁾ 40800⁽²⁾	15200 33550	9.89 32.39
3.0 m 10.0 ft					36800⁽²⁾ 79450⁽²⁾	31150 67200	28850⁽²⁾ 62400⁽²⁾	22450 48400	24000⁽²⁾ 52100⁽²⁾	17150 36900	19500⁽²⁾ 42900⁽²⁾	14500 3200	10.04 32.93
1.5 m 5.0 ft					37550⁽²⁾ 81400⁽²⁾	30050 64700	29450⁽²⁾ 63800⁽²⁾	21700 46750	24150⁽²⁾ 52250⁽²⁾	16700 36000	21150⁽²⁾ 46500⁽²⁾	14450 31800	9.96 32.68
0			25950⁽²⁾ 60500⁽²⁾		36300⁽²⁾ 78850⁽²⁾	29550 63600	28850⁽²⁾ 62500⁽²⁾	21300 45850	23300⁽²⁾ 50250⁽²⁾	16450 35500	20950⁽²⁾ 46200⁽²⁾	15000 33000	9.64 31.64
-1.5 m -5.0 ft	24750⁽²⁾ 54600⁽²⁾		40350⁽²⁾ 88100⁽²⁾		33250⁽²⁾ 72100⁽²⁾	29550 63550	26650⁽²⁾ 57600⁽²⁾	21200 45650	20650⁽²⁾ 45500⁽²⁾	16500 36400	20300⁽²⁾ 44750⁽²⁾	16350 36100	9.07 29.70
-3.0 m -10.0 ft			33300⁽²⁾ 72350⁽²⁾		27950⁽²⁾ 60350⁽²⁾		22050⁽²⁾ 46950⁽²⁾	21500 46350			18850⁽²⁾ 41400⁽²⁾		8.17 26.69
-4.5 m -15.0 ft					18900⁽²⁾ 39550⁽²⁾						15600⁽²⁾ 36200⁽²⁾		6.77 21.22

Show/hide table

⁽¹⁾	Lift capacities are based on "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
⁽²⁾	Capacity is limited by hydraulics rather than by a tipping load.