Specifications
`
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
[SEBU7751]
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Safety Messages
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Plate Locations and Film Locations
WORK TOOL ARRANGEMENT
2.1. Shear Capacity
3.1. Tank Shear Capacity
4.1. Crushing Capacity
5.1. Out-of-balance Loads
6.1. Intended Use
Show/hide table
 | |
| Illustration 1 | g02141903 |
Frame with VTC Jaws | |
Show/hide table
 | |
| Illustration 2 | g02142357 |
Frame with VTC Jaws | |
Show/hide table
| Frame with VTC Jaws | ||||
| Specifications | VT-30 | VT-40 | VT-50 | VT-60 |
| Length (A) | 1986 mm (78.2 inch) |
2137 mm (84.1 inch) |
2477 mm (97.5 inch) |
2929 mm (115.3 inch) |
| Height (B) | 1304 mm (51.3 inch) |
1513 mm (59.6 inch) |
1721 mm (67.8 inch) |
2342 mm (92.2 inch) |
| Jaw Opening (C) | 677 mm (26.7 inch) |
815 mm (32.1 inch) |
975 mm (38.4 inch) |
1264 mm (49.8 inch) |
| Depth of the Jaw (D) | 645 mm (25.4 inch) |
748 mm (29.5 inch) |
862 mm (33.9 inch) |
1061 mm (41.8 inch) |
| Width (W) | 793 mm (31.2 inch) |
793 mm (31.2 inch) |
1010 mm (39.8 inch) |
1180 mm (46.5 inch) |
| Width of Fixed Jaw (WF) | 330 mm (13 inch) |
364 mm (14.3 inch) |
400 mm (15.8 inch) |
490 mm (19.3 inch) |
| Width of Movable Jaw (WM) | 120 mm (4.7 inch) |
132 mm (5.2 inch) |
132 mm (5.2 inch) |
160 mm (6.3 inch) |
| Length of the Cutter (E) | 381 mm (15 inch) |
439 mm (17.3 inch) |
496 mm (19.5 inch) |
573 mm (22.6 inch) |
| Weight (1) | 1890 kg (4167 lb) |
2535 kg (5589 lb) |
3582 kg (7897 lb) |
5660 kg (12478 lb) |
| Jaws | ||||
| Maximum Operating Pressure | 35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
| Optimum Oil Flow | 150 L/min (39.6 US gpm) |
200 L/min (52.8 US gpm) |
300 L/min (79.3 US gpm) |
400 L/min (105.7 US gpm) |
| Rotation | ||||
| Maximum Operating Pressure | 14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
| Optimum Oil Flow | 40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
80 L/min (21.1 US gpm) |
Show/hide table
| ( 1 ) | The weight is without the machines mounting bracket. |
Show/hide table
 | |
| Illustration 3 | g02141235 |
Frame with VTB Jaws | |
Show/hide table
 | |
| Illustration 4 | g02141908 |
Frame with VTB Jaws | |
Show/hide table
| Frame with VTB Jaws | ||||
| Specifications | VT-30 | VT-40 | VT-50 | VT-60 |
| Length (A) | 1988 mm (78.3 inch) |
2107 mm (83 inch) |
2477 mm (97.5 inch) |
2929 mm (115.3 inch) |
| Height (B) | 1299 mm (51.1 inch) |
1514 mm (59.6 inch) |
1721 mm (67.8 inch) |
2376 mm (93.5 inch) |
| Jaw Opening (C) | 705 mm (27.8 inch) |
846 mm (33.3 inch) |
1043 mm (41.1 inch) |
1302 mm (51.3 inch) |
| Depth of the Jaw (D) | 646 mm (25.4 inch) |
725 mm (28.5 inch) |
865 mm (34.1 inch) |
1061 mm (41.8 inch) |
| Width (W) | 793 mm (31.2 inch) |
793 mm (31.2 inch) |
1010 mm (39.8 inch) |
1180 mm (46.5 inch) |
| Width of Fixed Jaw (WF) | 330 mm (13 inch) |
364 mm (14.3 inch) |
400 mm (15.8 inch) |
490 mm (19.3 inch) |
| Width of Movable Jaw (WM) | 120 mm (4.7 inch) |
132 mm (5.2 inch) |
132 mm (5.2 inch) |
160 mm (6.3 inch) |
| Length of the Cutter (E) | 200 mm (7.9 inch) |
260 mm (10.2 inch) |
260 mm (10.2 inch) |
250 mm (9.8 inch) |
| Weight (1) | 1888 kg (4162 lb) |
2540 kg (5600 lb) |
3578 kg (7888 lb) |
5660 kg (12478 lb) |
| Jaws | ||||
| Maximum Operating Pressure | 35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
| Optimum Oil Flow | 150 L/min (39.6 US gpm) |
200 L/min (52.8 US gpm) |
300 L/min (79.3 US gpm) |
400 L/min (105.7 US gpm) |
| Rotation | ||||
| Maximum Operating Pressure | 14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
| Optimum Oil Flow | 40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
80 L/min (21.1 US gpm) |
Show/hide table
| ( 1 ) | The weight is without the machines mounting bracket. |
Show/hide table
 | |
| Illustration 5 | g02141236 |
Frame with VTK Jaws | |
Show/hide table
 | |
| Illustration 6 | g02141911 |
Frame with VTK Jaws | |
Show/hide table
| Frame with VTK Jaws | |||
| Specifications | VT-30 | VT-40 | VT-50 |
| Length (A) | 1995 mm (78.5 inch) |
2109 mm (83 inch) |
2484 mm (97.8 inch) |
| Height (B) | 1399 mm (55.1 inch) |
1554 mm (61.2 inch) |
1755 mm (69.1 inch) |
| Jaw Opening (C) | 697 mm (27.4 inch) |
808 mm (31.8 inch) |
968 mm (38.1 inch) |
| Depth of the Jaw (D) | 674 mm (26.5 inch) |
732 mm (28.8 inch) |
864 mm (34 inch) |
| Width (W) | 793 mm (31.2 inch) |
793 mm (31.2 inch) |
1010 mm (39.8 inch) |
| Width of Fixed Jaw (WF) | 500 mm (19.7 inch) |
540 mm (21.3 inch) |
617 mm (24.3 inch) |
| Width of Movable Jaw (WM) | 280 mm (11 inch) |
335 mm (13.2 inch) |
372 mm (14.7 inch) |
| Length of the Cutter (E) | 200 mm (7.9 inch) |
200 mm (7.9 inch) |
250 mm (9.8 inch) |
| Weight (1) | 2087 kg (4601 lb) |
2772 kg (6111 lb) |
3901 kg (8600 lb) |
| Jaws | |||
| Maximum Operating Pressure | 35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
| Optimum Oil Flow | 150 L/min (39.6 US gpm) |
200 L/min (52.8 US gpm) |
300 L/min (79.3 US gpm) |
| Rotation | |||
| Maximum Operating Pressure | 14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
| Optimum Oil Flow | 40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
Show/hide table
| ( 1 ) | The weight is without the machines mounting bracket. |
Note: The primary pulverizer jaws are not available for the VT-60 Multi-Processor.
Show/hide table
 | |
| Illustration 7 | g02141239 |
Frame with VTP Jaws | |
Show/hide table
 | |
| Illustration 8 | g02141915 |
Frame with VTP Jaws | |
Show/hide table
| Frame with VTP Jaws | ||||
| Specifications | VT-30 | VT-40 | VT-50 | VT-60 |
| Length (A) | 2107 mm (83 inch) |
2282 mm (90 inch) |
2694 mm (106.1 inch) |
3082 mm (121.3 inch) |
| Height (B) | 1554 mm (61.2 inch) |
1786 mm (70.3 inch) |
2075 mm (82 inch) |
2551 mm (100.4 inch) |
| Jaw Opening (C) | 727 mm (28.6 inch) |
884 mm (34.8 inch) |
1071 mm (42.2 inch) |
1397 mm (55 inch) |
| Depth of the Jaw (D) | 618 mm (24.3 inch) |
744 mm (29.3 inch) |
917 mm (36.1 inch) |
1061 mm (41.8 inch) |
| Width (W) | 793 mm (31.2 inch) |
793 mm (31.2 inch) |
1010 mm (39.8 inch) |
1180 mm (46.5 inch) |
| Width of Fixed Jaw (WF) | 440 mm (17.3 inch) |
500 mm (19.7 inch) |
580 mm (22.8 inch) |
700 mm (27.6 inch) |
| Width of Movable Jaw (WM) | 330 mm (13 inch) |
364 mm (14.3 inch) |
420 mm (16.5 inch) |
480 mm (18.9 inch) |
| Length of the Cutter (E) | 200 mm (7.9 inch) |
200 mm (7.9 inch) |
200 mm (7.9 inch) |
250 mm (9.8 inch) |
| Weight (1) | 1967 kg (4336 lb) |
2637 kg (5814 lb) |
3578 kg (7888 lb) |
6036 kg (13307 lb) |
| Jaws | ||||
| Maximum Operating Pressure | 35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
| Optimum Oil Flow | 150 L/min (39.6 US gpm) |
200 L/min (52.8 US gpm) |
300 L/min (79.3 US gpm) |
400 L/min (105.7 US gpm) |
| Rotation | ||||
| Maximum Operating Pressure | 14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
| Optimum Oil Flow | 40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
80 L/min (21.1 US gpm) |
Show/hide table
| ( 1 ) | The weight is without the machines mounting bracket. |
Show/hide table
 | |
| Illustration 9 | g02141240 |
Frame with VTS Jaws | |
Show/hide table
 | |
| Illustration 10 | g02141918 |
Frame with VTS Jaws | |
Show/hide table
| Frame with VTS Jaws | ||||
| Specifications | VT-30 | VT-40 | VT-50 | VT-60 |
| Length (A) | 1836 mm (72.3 inch) |
2073 mm (81.6 inch) |
2455 mm (96.7 inch) |
2881 mm (113.4 inch) |
| Height (B) | 1302 mm (51.3 inch) |
1439 mm (56.7 inch) |
1662 mm (65.4 inch) |
1964 mm (77.3 inch) |
| Jaw Opening (C) | 321 mm (12.6 inch) |
391 mm (15.4 inch) |
446 mm (17.6 inch) |
556 mm (21.9 inch) |
| Depth of the Jaw (D) | 485 mm (19.1 inch) |
597 mm (23.5 inch) |
714 mm (28.1 inch) |
854 mm (33.6 inch) |
| Width (W) | 793 mm (31.2 inch) |
793 mm (31.2 inch) |
1010 mm (39.8 inch) |
1180 mm (46.5 inch) |
| Width of Fixed Jaw (WF) | 300 mm (11.8 inch) |
312 mm (12.3 inch) |
370 mm (14.6 inch) |
460 mm (18.1 inch) |
| Width of Movable Jaw (WM) | 89 mm (3.5 inch) |
100 mm (3.9 inch) |
119 mm (4.7 inch) |
149 mm (5.9 inch) |
| Length of the Cutter (E) | 381 mm (15 inch) |
496 mm (19.5 inch) |
572 mm (22.5 inch) |
704 mm (27.7 inch) |
| Weight (1) | 1848 kg (4074 lb) |
2465 kg (5434 lb) |
3672 kg (8095 lb) |
5824 kg (12840 lb) |
| Jaws | ||||
| Maximum Operating Pressure | 35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
| Optimum Oil Flow | 150 L/min (39.6 US gpm) |
200 L/min (52.8 US gpm) |
300 L/min (79.3 US gpm) |
400 L/min (105.7 US gpm) |
| Rotation | ||||
| Maximum Operating Pressure | 14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
| Optimum Oil Flow | 40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
80 L/min (21.1 US gpm) |
Show/hide table
| ( 1 ) | The weight is without the machines mounting bracket. |
Show/hide table
 | |
| Illustration 11 | g02141243 |
Frame with VTZ Jaws | |
Show/hide table
 | |
| Illustration 12 | g02141922 |
Frame with VTZ Jaws | |
Show/hide table
| Frame with VTZ Jaws | ||
| Specifications | VT-40 | VT-50 |
| Length (A) | 2118 mm (83.4 inch) |
2544 mm (100.2 inch) |
| Height (B) | 1589 mm (62.6 inch) |
1899 mm (74.8 inch) |
| Jaw Opening (C) | 337 mm (13.3 inch) |
409 mm (16.1 inch) |
| Depth of the Jaw (D) | 487 mm (19.2 inch) |
595 mm (23.4 inch) |
| Width (W) | 793 mm (31.2 inch) |
1010 mm (39.8 inch) |
| Width of Fixed Jaw (WF) | 405 mm (16 inch) |
498 mm (19.6 inch) |
| Width of Movable Jaw (WM) | 122 mm (4.8 inch) |
152 mm (6 inch) |
| Length of the Cutter (E) | 460 mm (18.1 inch) |
580 mm (22.8 inch) |
| Weight (1) | 2651 kg (5844 lb) |
4078 kg (8990 lb) |
| Jaws | ||
| Maximum Operating Pressure | 35000 kPa (5076 psi) |
35000 kPa (5076 psi) |
| Optimum Oil Flow | 200 L/min (52.8 US gpm) |
300 L/min (79.3 US gpm) |
| Rotation | ||
| Maximum Operating Pressure | 14000 kPa (2031 psi) |
14000 kPa (2031 psi) |
| Optimum Oil Flow | 40 L/min (10.6 US gpm) |
40 L/min (10.6 US gpm) |
Show/hide table
| ( 1 ) | The weight is without the machines mounting bracket. |
Note: The tank shear jaws are not available for the VT-30 and the VT-60 Multi-Processor.
Shear Capacity
The following table provides an overview of the profiles of steel that can be cut by the shear jaws and the tank shear jaws. The profiles are the most common profiles. The profiles are made of Tensile strength steel 370 MPa.
The dimensions of the profiles are the maximum dimension that can be safely cut. Consult your Verachtert dealer before you cut materials that are larger than the dimensions in the table. Consult your Verachtert dealer before you cut steel that has a rating that is higher than 520 MPa.
The dimensions of the steel profiles provide an indication of the cutting capability. The exact cutting capability depends on excavator operation pressure and performance, on the type of the steel, and on the condition of the steel, jaws, and cutters. Consult your Verachtert dealer before you cut materials that are not listed in the table.
Show/hide table
| VT-30 | VT-40 | VT-50 | VT-60 | |
| Square bar (mm) | 60 x 60 | 70 x 70 | 80 x 80 | 90 x 90 |
| Round bar (mm) | Ø 65 | Ø 80 | Ø 90 | Ø 100 |
| Narrow I-beam IPE | 300 | 400 | 500 | 600 |
| Wide I-beam HE-A | 200 | 260 | 320 | 400 |
| Plate (mm) | 12 | 14 | 16 | 17 |
| Pipe (mm) | 219 x 8 | 273 x 9 | 356 x 11 | 406 x 12.5 |
Tank Shear Capacity
Show/hide table
| VT-40 | VT-50 | |
| Plate (1) (mm) | 25 | 30 |
| Plate (2) (mm) | 20 | 25 |
Show/hide table
| ( 1 ) | Tensile Strength Steel 370 MPa |
| ( 2 ) | Tensile Strength Steel 520 MPa |
Crushing Capacity
The following table provides an overview of the concrete that can be crushed by the jaws of the work tool.
The concrete thickness provides an indication of the crushing capability. The exact crushing capability depends on excavator operation pressure and performance, on the type and the amount of reinforcement bar, and on the condition of the concrete, jaws, and cutters. Consult your Verachtert dealer before you cut or before you crush materials that are not listed in the table.
Show/hide table
| Crushing Capacity Concrete (1) Thickness (mm) |
||||
| Sales Model | VT-30 | VT-40 | VT-50 | VT-60 |
| VTC Jaws | 550 mm (21.65 inch) |
650 mm (25.59 inch) |
800 mm (31.50 inch) |
1000 mm (39.37 inch) |
| VTB Jaws | 600 mm (23.62 inch) |
700 mm (27.56 inch) |
850 mm (33.47 inch) |
1050 mm (41.34 inch) |
| VTK Jaws | 550 mm (21.65 inch) |
650 mm (25.59 inch) |
800 mm (31.50 inch) |
N/A |
| VTP Jaws | 550 mm (21.65 inch) |
650 mm (25.59 inch) |
800 mm (31.50 inch) |
1000 mm (39.37 inch) |
Show/hide table
| ( 1 ) | Concrete Class: B25-B35 / 3000-5000 psi |
Out-of-balance Loads
In order to prevent rotation of the work tool that is not wanted, the operator must not exceed the rating for an out-of-balance load.
Show/hide table
 | |
| Illustration 13 | g01884535 |
(A) Center of the jaw of the work tool (B) Object to crush, pulverize, or cut (M) Moment of torque of the object (G1) Maximum weight at 2 m (6.5 ft) (G2) Maximum weight at 4 m (13 ft) (G3) Maximum weight at 6 m (20 ft) | |
Show/hide table
| Out-of-balance Load | |||||
| MP | Jaw | Moment of torque (M) | G1 | G2 | G3 |
| VT-50 | VTP | 1400 N·m (1033 lb ft) |
70 N·m (52 lb ft) |
35 N·m (26 lb ft) |
25 N·m (18 lb ft) |
| VT-50 | VTZ | 2200 N·m (1623 lb ft) |
115 N·m (85 lb ft) |
55 N·m (41 lb ft) |
35 N·m (26 lb ft) |
| VT-40 | VTK | ||||
| VT-50 | VTK | 2800 N·m (2065 lb ft) |
140 N·m (103 lb ft) |
70 N·m (52 lb ft) |
45 N·m (33 lb ft) |
| VT-40 | VTB | ||||
| VT-40 | VTP | ||||
| VT-40 | VTC | 3200 N·m (2360 lb ft) |
160 N·m (118 lb ft) |
80 N·m (59 lb ft) |
50 N·m (37 lb ft) |
| VT-30 | VTP | ||||
| VT-30 | VTK | ||||
| VT-50 | VTS | ||||
| VT-40 | VTS | 3600 N·m (2655 lb ft) |
180 N·m (133 lb ft) |
90 N·m (66 lb ft) |
60 N·m (44 lb ft) |
| VT-30 | VTB | ||||
| VT-30 | VTC | ||||
| VT-40 | VTZ | ||||
| VT-30 | VTS | ||||
| VT-50 | VTB | ||||
| VT-50 | VTC | 4000 N·m (2950 lb ft) |
200 N·m (148 lb ft) |
100 N·m (74 lb ft) |
70 N·m (52 lb ft) |
| VT-60 | VTP | ||||
| VT-60 | VTC | 8000 N·m (5900 lb ft) |
400 N·m (295 lb ft) |
200 N·m (148 lb ft) |
135 N·m (100 lb ft) |
| VT-60 | VTB | ||||
| VT-60 | VTS | ||||
Intended Use
The Multi-Processor can accept multiple jaw sets that provide exceptional cutting and crushing force.
- The Multi-Processor with Primary Pulverizer Jaws, pulverizes concrete, cuts rebar and separates rebar from concrete.
- The Multi-Processor with Secondary Pulverizer Jaws, recycles demolished concrete by pulverizing concrete, separating concrete and rebar, and cutting rebar as needed.
- The Multi-Processor with Concrete Cutter Jaws, puts the maximum demolition force precisely where the force is needed, for fast efficient demolition work. The integral steel-cutting knives slice through rebar and pipe.
- The Multi-Processor with Crusher Jaws, are for demolition of moderately reinforced concrete structures.
- The Multi-Processor with Shear Jaws, demolishes steel structures and reduces steel scrap with high-strength reversible knives.
- The Multi-Processor with Tank Shear Jaws, quickly cuts steel plate on barges, railway cars, grain, water, oil, and fuel tanks.
Information System:
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Relief Valve (Auxiliary) - Test and Adjust - Main (Medium Pressure), System 17
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Relief Valve (Auxiliary) - Test and Adjust - Line, System 17
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Safety Messages
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Work Tool Parameter - Default Values - System 17
330F MHPU Mobile Hydraulic Power Unit
Radiator Core - Clean
345C MHPU Mobile Hydraulic Power Unit Hydraulic System
Combined Function Hydraulic System - System 17
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
390D Excavator
Lifting Capacities - 390D L
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems
Oil Filter (Hydraulic)
Procedure to Adjust Track Tension with Restricted Access to Fill Valve{7050}
2012/11/30
New Crankshaft for the C6.6 Machine Engines {1202}
2011/11/07
The Swing Bearing In the Bearing And Gear Group Is Improved on Certain 330D, 345C and 345D Excavators and 345C and 345D Mobile Hydraulic Power Units {7063}
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Plate Locations and Film Locations
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Declaration of Conformity
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Daily Inspection
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Work Tool Installation and Removal
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Operation
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Transport Position
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Bushings - Lubricate
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Crusher Tooth and Ripper Tooth - Replace
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Crusher Tooth and Ripper Tooth - Tighten
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Cutting Edges - Inspect/Replace
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Jaw - Repair
VT-30, VT-40, VT-50 and VT-60 Multi-Processors
Rotator Gear - Lubricate