Verachtert work tools are identified by Serial Numbers.
The serial number plate (1) is located on the side of the frame near the rotator.
 | |
| Illustration 1 | g02159703 |
(1) Typical example of serial number plate on frame | |
 | |
| Illustration 2 | g02160567 |
(1) Typical example of serial number plate and CE mark on frame | |
Verachtert Multi-processor jaw sets are identified by Serial Numbers.
The serial number plate (2) is located on the moveable jaw of the jaw set near the hinge point.
 | |
| Illustration 3 | g02159705 |
(2) Typical example of serial number plate on jaw set | |
 | |
| Illustration 4 | g02159558 |
(2) Typical example of serial number plate on jaw set | |
European Union
For work tools that are compliant to "2006/42/EC", the following information is stamped onto the serial number CE plate.
Information for Frame
For quick reference, record the identification numbers in the spaces that are provided below for the frame.
Model Number____________________
Serial Number____________________
Year of Manufacture____________________
Mass (kg) ____________________
Information for Jaw Sets
For quick reference, record the identification numbers in the spaces that are provided below for the jaw set.
Model Number____________________
Serial Number____________________
Year of Manufacture____________________
Mass (kg) ____________________
For quick reference, record the identification numbers in the spaces that are provided below for a second jaw set.
Model Number____________________
Serial Number____________________
Year of Manufacture____________________
Mass (kg) ____________________
CE Mark
The CE mark is located on the serial number plate (1) .