VT-30, VT-40, VT-50 and VT-60 Multi-Processors Declaration of Conformity Caterpillar

Declaration of Conformity

VT-30, VT-40, VT-50 and VT-60 Multi-Processors [SEBU7751]

VT-30, VT-40, VT-50 and VT-60 Multi-Processors Plate Locations and Film Locations

VT-30, VT-40, VT-50 and VT-60 Multi-Processors Daily Inspection

MACHINE ARRANGEMENT

VT-30, VT-40, VT-50 and VT-60 Multi-Processors Declaration of Conformity

Show/hide table

Table 1
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to 2006/42/EC applies only to those machines originally CE marked by the manufacturer listed and which have not since been modified.


EC DECLARATION OF CONFORMITY OF MACHINERY

Manufacturer: Verachtert Sigarenmakerstraat 9 NL-5232 BJ 's-Hertogenbosch The Netherlands
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
			Patrick Grant, Safety Coordinator, Verachtert, Sigarenmakerstraat 9, NL-5232 BJ 's-Hertogenbosch, The Netherlands
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder
Description:		Generic Denomination:	Earth-moving Equipment
		Function:	Multi-processor
		Model/Type:	VT-30, VT-40, VT-50, and VT-60 Multi-Processors
		Serial Number:
		Commercial Name:	Verachtert
Fulfills all the relevant provisions of the following Directives

	Directives		Notified Body	Document No.
	2006/42/EC		N/A






Done at:				Signature
Date:				Name/Position

Note: The above information was correct as ofMay 2010, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.