329E Excavator Declaration of Conformity Caterpillar

Declaration of Conformity

329E Excavator [SEBU8576]

329E Excavator Boom/Stick/Bucket Combinations

ENGINE ARRANGEMENT

MISCELLANEOUS INFORMATION

329E Excavator Declaration of Conformity

784C and 785C Off-Highway Truck/Tractors Emissions Warranty Information

Show/hide table

Table 1
An EC or EU Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC or EU Declaration of Conformity provided with the machine. The extract shown below from an EC or EU Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified.


ORIGINAL EC or EU DECLARATION OF CONFORMITY

Manufacturer: AVSpare Inc., 100 N.E. Adams Street, Peoria, Illinois 61629, USA
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:
			Standards & Regulations Manager,AVSpare France S.A.S 40, Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder
Description:		Generic Denomination:	Earth-moving Equipment
		Function:	Hydraulic Excavator
		Model/Type:	329E
		Serial Number:
		Commercial Name:	AVSpare
Fulfills all the relevant provisions of the following Directives

	Directives		Notified Body	Document No.
	2000/14/EC amended by 2005/88/EC, Note (1)
	2006/42/EC		N/A
	2004/108/EC		N/A
	2014/30/EU		N/A

Note (1)		Annex -_____ Guaranteed Sound Power Level -_____dB (A) Representative Equipment Type Sound Power Level - _____dB (A) Engine Power per ____-____ kW Rated engine speed - _____ rpm Technical Documentation accessible through person listed above authorized to compile the Technical File


Done at:				Signature
Date:				Name/Position

Note: The above information was correct as of May 2010, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.