The intended use of this machine is for excavating with a bucket or working with approved work tools. The machine should be operated with the undercarriage in a stationary position since the upper structure is normally capable of 360 degree swing with mounted equipment. This machine can be used in object handling applications that are within the lift capacity of the machine. When this machine is used in object handling applications, ensure that the machine is properly configured and operated properly. Obey any local governmental regulations and regional governmental regulations. Only lift objects from approved lifting points and with approved lifting devices.
The expected life, defined as total machine hours, of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. The expected life interval corresponds to the service hours to engine overhaul. Service hours to engine overhaul may vary based on overall machine duty cycle. At the expected life interval, remove the machine from operation and consult your Cat dealer for inspect, repair, rebuild, install remanufactured, install new components, or disposal options and to establish a new expected life interval. If a decision is made to remove this machine from service, refer to Operation and Maintenance Manual, "Decommissioning and Disposal".
The following items are required to obtain an economical expected life of this machine:
Table 1
| 329E L Excavator(1) |
| |
6.15 m (20 ft 2 inch) Reach Boom |
10.2 m (33 ft 6 inch) Super Long Reach Boom |
| 3.20 m (10 ft 6 inch) stick |
7.85 m (25 ft 9 inch) Stick |
| Bucket |
1.51 m3 (2.00 yd3) |
0.45 m3 (0.59 yd3) |
0.60 m3 (0.78 yd3) |
| Approximate Weight |
30550 kg (67350 lb) |
31640 kg (69750 lb) |
31590 kg (69640 lb) |
| Overall Length (A) |
10390 mm (34 ft 1 inch) |
14440 mm (47 ft 5 inch) |
| Overall Height (B) |
3370 mm (11 ft 1 inch) |
3230 mm (10 ft 7 inch) |
| Swing Radius (C) |
3090 mm (10 ft 2 inch) |
| Overall Width (D) |
3390 mm (11 ft 1 inch) |
| Track Shoe Width (E) |
800 mm (31 inch) |
| Length to centers of rollers (F) |
3990 mm (13 ft 1 inch) |
| Length of Track (G) |
4860 mm (15 ft 11 inch) |
| (1) |
The fuel tank is 10 percent full. |
Table 2
| 329E LN Excavator(1) |
| |
6.15 m (20 ft 2 inch) Reach Boom |
5.3 m (17 ft 5 inch) Mass Boom |
| 2.65 m (8 ft 10 inch) stick |
2.50m (8 ft 2 inch) stick |
| Bucket |
1.71 m3 (2.20 yd3) |
2.12 m3 (2.80 yd3) |
| Approximate Weight |
29370 kg (64750 lb) |
29990 kg (66120 lb) |
| Overall Length (A) |
10400 mm (34 ft) |
9830 mm (32 ft 3 inch) |
| Overall Height (B) |
3450 mm (11 ft 4 inch) |
3520mm (11 ft 7 inch) |
| Swing Radius (C) |
3090 mm (10 ft 2 inch) |
| Overall Width (D) |
2990 mm (10 ft 10 inch) |
| Track Shoe Width (E) |
600 mm (24 inch) |
| Length to centers of rollers (F) |
3990 mm (13 ft 1 inch) |
| Length of Track (G) |
4860 mm (15 ft 11 inch) |
| (1) |
The fuel tank is 10 percent full. |
Table 3
| 329E |
| |
5.3 m (17 ft 5 inch) Mass Boom |
5.9 m (19 ft 4 inch) Reach Boom |
10.2 m (33 ft 6 inch) Super Long Reach Boom |
| 2.5 m (8 ft 2 inch) Stick |
2.5 m (8 ft 2 inch) Stick |
2.95 m (9 ft 6 inch) Stick |
7.85 m (25 ft 9 inch) Stick |
| Bucket |
2.14 m3 (2.80 yd3) |
1.30 m3 (1.70 yd3) |
0.45 m3 (0.59 yd3) |
| Maximum Digging Depth (A) |
6000 mm (19 ft 8 inch) |
6360 mm (20 ft 10 inch) |
6810 mm (22 ft 4 inch) |
14750 mm (48 ft 5 inch) |
| Maximum Reach at Ground Level (B) |
9200 mm (30 ft 2 inch) |
9690 mm (31 ft 9 inch) |
10110 mm (33 ft 2 inch) |
18420 mm (60 ft 5 inch) |
| Maximum Cutting Height (C) |
9060 mm (29 ft 9 inch) |
9490 mm (31 ft 1 inch) |
9690 mm (31 ft 9 inch) |
13620 mm (44 ft 8 inch) |
| Maximum Loading Height (D) |
5890 mm (19 ft 4 inch) |
6440 mm (21 ft 2 inch) |
6640 mm (21 ft 9 inch) |
11420 mm (37 ft 6 inch) |
| Minimum Loading Height (E) |
2280 mm (7 ft 6 inch) |
2860 mm (9 ft 5 inch) |
2410 mm (7 ft 11 inch) |
1170 mm (3 ft 10 inch) |
| Maximum Cut Depth (F)(1) |
5810 mm (19 ft 1 inch) |
6160 mm (20 ft 3 inch) |
6640 mm (21 ft 9 inch) |
14650 mm (48 ft 1 inch) |
| Maximum Digging Depth (Vertical Wall) (G) |
4250 mm (13 ft 11 inch) |
4870 mm (15 ft 11 inch) |
5300 mm (17 ft 5 inch) |
12690 mm (41 ft 8 inch) |
| (1) |
2440 mm (8 ft) level bottom |
