There are several specific messages on this machine. The exact location of the messages and the description of the information are reviewed in this section. Become familiar with all messages.
Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.
Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part. Any Cat dealer can provide new messages.
| |
| Illustration 1 | g03683681 |
| |
| Illustration 2 | g03683683 |
Cleaning Windows (1)
This message is located in the cab on the polycarbonate windows.
| |
| Illustration 3 | g01134495 |
| NOTICE |
|---|
|
Clean windows with a wet cloth or sponge. Dry cloth or sponge may scratch window material. |
Alternate Exit (2)
If equipped, this message is located on the roof hatch.
| |
| Illustration 4 | g02052833 |
If the Primary exits are blocked, exit the machine through the opening.
For more information, refer to Operation and Maintenance Manual, "Alternate Exit".
Alternate Exit Lock/Unlock (3)
If equipped, this message is located on the roof hatch.
| |
| Illustration 5 | g02052873 |
| NOTICE |
|---|
|
Unlock alternate exit window during machine operations. |
Move the lever to the left to the UNLOCK position. Move the lever to the right to the LOCK position. Exit through the opening.
For more information, refer to Operation and Maintenance Manual, "Alternate Exit".
Data Privacy (4)
| |
| Illustration 6 | g01418953 |
The Product Link System is a satellite communication device that transmits information regarding the machine back to AVSpare and Cat dealers and customers. All logged events and diagnostic codes that are available to the Cat Electronic Technician (ET) on the Cat data link can be sent to the satellite. Information can also be sent to the Product Link System. The information is used to improve Cat products and Cat services.
Refer to Operation and Maintenance Manual, "Product Link" for more information.
Machine Security System (5)
This message is located on the bottom corner of the cab door.
| |
| Illustration 7 | g00951606 |
This machine may be equipped with a security system. Read the Operation and Maintenance Manual before you operate the machine.
Refer to Operation and Maintenance Manual, "Machine Security System" for more information.
Alternate Exit (6)
If equipped, this message is located on the right side window of the cab.
| |
| Illustration 8 | g01069768 |
Break glass in order to exit.
Refer to Operation and Maintenance Manual, "Alternate Exit" for further information.
Joystick Controls Alternate Patterns (7)
If equipped, this message is located on the right side window of the cab.
| |
| Illustration 9 | g03094696 |
Refer to Operation and Maintenance Manual, "Joystick Controls Alternate Patterns" for further information.
Alternate Exit (8)
If equipped, this message is located on the front window of the cab in the upper left-hand corner.
| |
| Illustration 10 | g02052913 |
Move the lever to the right in order to unlock the front window. Raise the window into the storage position. Exit through the opening.
Refer to Operation and Maintenance Manual, "Alternate Exit" for further information.
Do not step in this area.
Radial Seal Air Filters (9)
This message is located on the air cleaner.
| |
| Illustration 11 | g01134494 |
To avoid engine damage, use only Cat radial seal air filters. Other filters will not seal properly. Read the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Air Filter Primary Element - Clean/Replace".
No Step (10)
This message is located on the engine hood, and in two locations on the engine. This message is also located on the left side of the machine behind the cab.
| |
| Illustration 12 | g00911158 |
Diesel Fuel Requirements (11)
This message is located by the fuel tank.
| |
| Illustration 13 | g03218956 |
|
(A) NACD film
(B) EAME film (C) Japan film | |
Use only ultralow sulfur diesel fuel.
Refer to Operation and Maintenance Manual, "Lubricant Viscosities".