303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Caterpillar Approved Work Tools Caterpillar

Caterpillar Approved Work Tools

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators [SEBU8574]

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Hydraulic System Oil - Change

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Specifications

IMPLEMENTS

303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Equipment Lowering with Engine Stopped

303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Caterpillar Approved Work Tools

The following work tools have been approved by AVSpare. Refer to the owners manual and the service manual for each work tool for proper operation, maintenance, and servicing of the work tools.

Show/hide table

Table 1
AVSpare Approved Work Tools for Mini Hydraulic Excavators
Work Tool	Machine
Work Tool	303.5D CR	304D CR	305D CR	305.5D CR
A14B Auger	218-3198	218-3198	-	-
A19B Auger	220-7137	220-7137	275-1000	-
A26B Auger	-	-	-	275-1001
CVP16 Compactor	222-3780	222-3780	222-3780	222-3780
B2 Hammer	532-9102⁽⁴⁾ 532-9202⁽⁴⁾	-	-	-
B4 Hammer	532-9104⁽¹⁾ 532-9204 ⁽²⁾	532-9104 ⁽¹⁾ 532-9204 ⁽²⁾	532-9104 ⁽¹⁾ 532-9204 ⁽²⁾	532-9104 ⁽¹⁾ 532-9204 ⁽²⁾
B6 Hammer	532-9106 ⁽¹⁾ 532-9206 ⁽²⁾	532-9106 ⁽¹⁾ 532-9206 ⁽²⁾	523-3106 ⁽³⁾ 532-9106 ⁽¹⁾ 532-9206 ⁽²⁾ 523-3116 ⁽¹⁾	523-3106 ⁽³⁾ 532-9106 ⁽¹⁾ 532-9206 ⁽²⁾ 523-3116 ⁽¹⁾
H55D S Hammer - Pin-On	249-0023⁽⁴⁾ 249-1145⁽⁵⁾ 270-8681⁽⁶⁾	249-0023⁽⁴⁾ 249-1145⁽⁵⁾ 270-8681⁽⁶⁾	-	-
H55D S Hammer - Flat Top	313-3992⁽⁴⁾ 280-9827⁽⁵⁾ 330-5359⁽⁶⁾	313-3992⁽⁴⁾ 280-9827⁽⁵⁾ 330-5359⁽⁶⁾	-	-
H65D S Hammer - Pin-On	-	249-3161⁽⁴⁾ 252-1211⁽⁵⁾ 270-8681⁽⁶⁾	249-3161⁽⁴⁾ 283-1502⁽⁵⁾ 270-8682⁽⁶⁾	249-3161⁽⁴⁾ 283-1502⁽⁵⁾ 270-8682⁽⁶⁾
H65D S Hammer - Flat Top	-	-	312-3266⁽⁴⁾ 308-7541⁽⁵⁾ 270-8682⁽⁶⁾	312-3266⁽⁴⁾ 308-7541⁽⁵⁾ 270-8682⁽⁶⁾
Ripper Shank	453-8570	453-8570	453-8571	453-8571
Quick Coupler	Hydraulic Dual Lock Pin Grabber Quick Coupler	Hydraulic Dual Lock Pin Grabber Quick Coupler	Hydraulic Dual Lock Pin Grabber Quick Coupler	Hydraulic Dual Lock Pin Grabber Quick Coupler
	Manual Dual Lock Pin Grabber Quick Coupler	Manual Dual Lock Pin Grabber Quick Coupler	Manual Dual Lock Pin Grabber Quick Coupler	Manual Dual Lock Pin Grabber Quick Coupler
	-	-	Hydraulic Dual Lock Pin Grabber Tilting Coupler	Hydraulic Dual Lock Pin Grabber Tilting Coupler

Show/hide table

⁽¹⁾	Non-silenced
⁽²⁾	Silenced
⁽³⁾	China only
⁽⁴⁾	Hammer
⁽⁵⁾	Mounting Group/Bracket
⁽⁶⁾	Lines Group

The use of hammers shortens the life of hydraulic oil. If a hammer is used, the following measures should be taken:

Shorten the interval for changing the hydraulic oil to 1500 service meter hours.
Use SAE 30 hydraulic oil or 15w40 hydraulic oil to sustain seal life.

This list was completed at the time of publication. There may be additional work tools that have been approved since that time. Consult your Cat^® dealer for an updated list of approved work tools.