PRODUCT SUPPORT PROGRAM FOR REPLACING THE GAUGE CLUSTER ON CERTAIN 301.6C, 301.8C AND 302.5C MINI HYDRAULIC EXCAVATORS
[REBE1003]
ELECTRICAL AND STARTING SYSTEM
WIRING GP
PRODUCT SUPPORT PROGRAM FOR REPLACING THE GAUGE CLUSTER ON CERTAIN 301.6C, 301.8C AND 302.5C MINI HYDRAULIC EXCAVATORS
REBE1003-01
Show/hide table
| 15Jul2006 |
| (Revised 21Jul2006) |
U-553
A-540
D-537
O-538
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE GAUGE CLUSTER ON CERTAIN 301.6C, 301.8C AND 302.5C MINI HYDRAULIC EXCAVATORS |
|
| 7451 | PS51214 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51214" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
| NOTE: | This revised Service Letter replaces the July 15, 2006 Service Letter. Changes have been made to the Affected Product section. |
Show/hide table
TERMINATION DATE |
| 31Jul2008 |
PROBLEM
Show/hide table
| The 245-3616 Monitoring Panel can fail due to a manufacturing problem. A "-005" error code is a typical failure. Apart from the readouts, the monitoring panel connections can also be a source of problems associated with starting and stopping the engine. Circuits for the fuel pump relay, engine stop relay and glow plug relay are all routed through the monitoring panel. If you have problems with any of these systems, first check the connectors on the rear of the panel. If the conectors are not the problem, replace the panel. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 301.6C | JBB00301-00854 |
| 301.8C | JSB00303-01536 |
| 302.5C | GBB00304-01182 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 2453616 | INSTRUMENT PANEL |
ACTION REQUIRED
Show/hide table
| Replace the monitoring panel with a new 245-3616 monitoring panel. The part number has not changed. All parts department stock are to the latest quality level. Take care with the connectors on the rear of the monitoring panel. The pins can be easily damaged. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 0.5-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK THAT MAY CRACK ON CERTAIN 325C L EXCAVATORS THAT ARE EQUIPPED FOR LONG REACH EXCAVATION
D11R, D10R, D9R, D8R, ATTACHMENT IDLER GUARD WEAR PACKAGES AVAILABLE
D11R/N CATERPILLAR® SLEEVE BEARING TRACK (SBT) LINK ASSEMBLY
UPDATES/ADDITIONS TO CATERPILLAR® CLASSIC UNDERCARRIAGE PARTS
NEW D8L SPLIT MASTER LINKS
Gasket and Seal Kits Available For Drive Train Components
D6R/D6M/D5M IDLER GROUPS WITH INCREASED WEAR MATERIAL
NEW D11R/N BUSHING WEAR CHART
SEALED PIN AND BUSHING GROUPS FOR 375/315 HYDRAULIC EXCAVATORS
D11R-D8R NEW TRACK GUIDES USED ON BOGIE SUSPENSION UNDERCARRIAGE
D10R � D6R TOUGH STEEL SEGMENTS AVAILABLE AT REDUCED PRICE
HEAVY DUTY TRACK ROLLER IMPROVEMENTS FOR 320C, 322C AND 325C
PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE SERVICE BRAKE RESERVOIR HOSE LENGTH ON CERTAIN 416E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE CONTROL FILM INSTRUCTION ON CERTAIN 323D, 324D, 325D, AND 330D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE BOOM ACCUMULATORS ON CERTAIN M325C MH AND M325D MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LATCH ON THE LEFT SIDE ENGINE ENCLOSURE DOOR ON CERTAIN 302.5C MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING CAB WINDOW VENT LATCHES ON CERTAIN 416E, 420E, and 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR BLEEDING THE SERVICE BRAKES ON CERTAIN 416E BACKHOE LOADERS
Product Support Program for the installation of an Additional Isolation Valve to Prevent Bucket Cylinder Drift on certain 301.5, 301.6, 301.6C, 301.8, 301.8C, 302.5, and 302.5C Excavators
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOMS AND GREASE LINES ON CERTAIN M325C AND M325D EXCAVATORS THAT ARE EQUIPPED FOR MATERIAL HANDLING APPLICATION
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE FUEL LINES ON CERTAIN 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MATERIAL HANDLER FRONT STRUCTURES ON CERTAIN 365B, 365BL, 365B Series II, AND 375L MATERIAL HANDLERS
Product Support Program for Replacing the Muffler That May Crack on Certain 416D Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE HOOD FILMS ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS