PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE CONTROL FILM INSTRUCTION ON CERTAIN 323D, 324D, 325D, AND 330D EXCAVATORS
[REBE1046]
SERVICE EQUIPMENT AND SUPPLIES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE CONTROL FILM INSTRUCTION ON CERTAIN 323D, 324D, 325D, AND 330D EXCAVATORS
REBE1046-00
Show/hide table
| 15Jul2006 |
U-555
D-539
O-539
Show/hide table
| Priority | PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE CONTROL FILM INSTRUCTION ON CERTAIN 323D, 324D, 325D, AND 330D EXCAVATORS |
|
| 7405 7557 | PI31016 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI31016" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31016" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| 31Jan2007 | 31Jul2007 |
PROBLEM
Show/hide table
| The control film instruction for the joystick pattern may need to be installed on certain 323D, 324D, 325D, and 330D Excavators. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 323DL | SDC00252-00267, 269-324, 326-404, 406-519 |
| 324D L | SYM00161-00165, 168-246, 248-249, 251-254 |
| 324D LN | EJC00225-00228, 231-234, 237, 239, 241-261, 263-268, 270-277, 279-288 |
| 325D | GPB00172-00174, 176-177, 180-185, 188, 191-199, 201-205, 207-209, 211-214, 216-217, 219-222, 224-329, 331-344, 346 PKE00199-00203, 205-206, 208-223, 225-315, 317-323, 325-355, 357-359 |
| 330D | GGE00224-00225, 227 RAS00175-00177, 179-180, 182-201, 204, 210-211, 244, 253, 256 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 4I8472 | FILM-INSTRUCTION |
ACTION REQUIRED
Show/hide table
| Install the 4I-8472 Control Film Instruction if missing. |
Show/hide table
|
| Image1 |
OWNER NOTIFIAVSION
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 1.0-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| COPY OF OWNER NOTIFIAVSION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE CONTROL FILM INSTRUCTION MODELS INVOLVED - 323D, 324D, 325D, AND 330D EXCAVATORS Dear AVSpare Product Owner: The control film instruction for the joystick pattern may need to be installed. You will not be charged for the service performed. Contact your local AVSpare dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 15Jul2006 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. AVSpare Inc. Identification #(s) Attached to 15Jul2006 Service Letter |
Information System:
PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING THE SERVICE BRAKE RESERVOIR HOSE LENGTH ON CERTAIN 416E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE GAUGE CLUSTER ON CERTAIN 301.6C, 301.8C AND 302.5C MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK THAT MAY CRACK ON CERTAIN 325C L EXCAVATORS THAT ARE EQUIPPED FOR LONG REACH EXCAVATION
D11R, D10R, D9R, D8R, ATTACHMENT IDLER GUARD WEAR PACKAGES AVAILABLE
D11R/N CATERPILLAR® SLEEVE BEARING TRACK (SBT) LINK ASSEMBLY
UPDATES/ADDITIONS TO CATERPILLAR® CLASSIC UNDERCARRIAGE PARTS
NEW D8L SPLIT MASTER LINKS
Gasket and Seal Kits Available For Drive Train Components
D6R/D6M/D5M IDLER GROUPS WITH INCREASED WEAR MATERIAL
NEW D11R/N BUSHING WEAR CHART
SEALED PIN AND BUSHING GROUPS FOR 375/315 HYDRAULIC EXCAVATORS
D11R-D8R NEW TRACK GUIDES USED ON BOGIE SUSPENSION UNDERCARRIAGE
PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE BOOM ACCUMULATORS ON CERTAIN M325C MH AND M325D MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LATCH ON THE LEFT SIDE ENGINE ENCLOSURE DOOR ON CERTAIN 302.5C MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING CAB WINDOW VENT LATCHES ON CERTAIN 416E, 420E, and 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR BLEEDING THE SERVICE BRAKES ON CERTAIN 416E BACKHOE LOADERS
Product Support Program for the installation of an Additional Isolation Valve to Prevent Bucket Cylinder Drift on certain 301.5, 301.6, 301.6C, 301.8, 301.8C, 302.5, and 302.5C Excavators
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOMS AND GREASE LINES ON CERTAIN M325C AND M325D EXCAVATORS THAT ARE EQUIPPED FOR MATERIAL HANDLING APPLICATION
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE FUEL LINES ON CERTAIN 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MATERIAL HANDLER FRONT STRUCTURES ON CERTAIN 365B, 365BL, 365B Series II, AND 375L MATERIAL HANDLERS
Product Support Program for Replacing the Muffler That May Crack on Certain 416D Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE HOOD FILMS ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR CEASING HOE OPERATION ON CERTAIN 416E, 420E AND 430E BACKHOE LOADERS EQUIPPED WITH STANDARD STICK
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE MACHINE CONTROLLER ON CERTAIN 330D EXCAVATORS