Product Improvement Program For Installing The Film-FOPS On Certain 320C Forestry Machines Caterpillar

Product Improvement Program For Installing The Film-FOPS On Certain 320C Forestry Machines [REBE1277]

OPERATOR STATION

ROPS/FOPS GP

Product Improvement Program For Installing The Film-FOPS On Certain 320C Forestry Machines

REBE1277-00

Show/hide table

09Nov2006

U-725

Show/hide table

*Priority*	PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE FILM-FOPS ON CERTAIN 320C FORESTRY MACHINES
7325 7405 7557		PI31184

Show/hide table

NOTE:

This Program must be administered as soon as possible. When reporting the repair, use "PI31184" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31184" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

Show/hide table

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst.

Show/hide table

COMPLETION DATE	TERMINATION DATE
31May2007	30Nov2007

PROBLEM

Show/hide table

The 255-3698 Film-FOPS may not have been installed on certain 320C Forestry Machines.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
320C FM HW	SAH01001-01214, 1216, 1219-1230, 1233-1234, 1236
320C FM ST	TBR01001-01027

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
1	2553698	FILM-FOPS

ACTION REQUIRED

Show/hide table

Inspect the cab to verify that the 255-3698 Film-FOPS is installed. If the film is not installed, install the 255-3698 Film-FOPS according to the 252-0531 Chart-Location (Cab/Forestry).

Show/hide table

Image1

Image2

OWNER NOTIFIAVSION

Show/hide table

U.S. and Canadian owners will receive the attached Owner Notification.

SERVICE CLAIM ALLOWANCES

Show/hide table

AVSpare		Dealer Suggested		Customer Suggested
Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
100%	100%	0%	0%	0%	0%

NOTE: This is a 0.5-hour job

PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.

Show/hide table

COPY OF OWNER NOTIFIAVSION FOR U.S. AND CANADIAN OWNERS

XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999

PRIORITY - Product Improvement Program For Installing The Film-FOPS

MODELS INVOLVED - 320C Forest Machines

Dear AVSpare Product Owner:

The 255-3698 Film-FOPS may not have been installed on the products listed below. If the film was not installed, a film needs to be installed in the cab. You will not be charged for the service performed.

Contact your local AVSpare dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.

Please refer the dealer to their Service Letter dated 09Nov2006 when scheduling this service.

We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.

AVSpare Inc.

Identification #(s)

Attached to 09Nov2006 Service Letter