PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
[REBE1500]
HYDRAULIC SYSTEM
MOTOR GP
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
REBE1500-00
Show/hide table
| 04Dec2006 |
U-763
A-727
D-712
O-742
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY |
|
| 5058 4351 | PI70218 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Mar2007 |
PROBLEM
Show/hide table
| The 2361235 and 2361237 Track Motors need to have the "X" and "T" ports inspected for the correct thread size. Some Track Motors were released with metric threaded ports. |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Check one of the plastic plugs in either "X" and "T" ports to identify what the base color (not the painted color) is. Metric threads are identified with "YELLOW" base color. Inch threads are identified with "WHITE" base color. Remove all track motors with "YELLOW" plastic plugs. Ref: Callout 1 is "T" Port and Callout 2 is "X" Port. |
Show/hide table
|
| Image1 |
PARTS DISPOSITION
Show/hide table
| Please return the travel motor to the following address: AVSpare Inc Bldg. C, Dock 22 8201 North University Peoria, IL 61615 Attn: Clark Hopkins |
Information System:
PRODUCT SUPPORT PROGRAM TO ADJUST AND PROTECT THE SIDESHIFT AND BACKHOE HOSES ON CERTAIN 422E AND 428E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM TO ADJUST AND PROTECT THE SIDESHIFT AND BACKHOE HOSES ON CERTAIN 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE 259-5049 WIRING GROUP (FOR COLD WEATHER MACHINES) OR THE 259-5040 WIRING GROUP (FOR STANDARD MACHINES) ON CERTAIN 320D EXCAVATORS
Product Improvement Program To Inspect And Replace If Necessary The 139-8736 Engine Mount On Certain 330D And 345C Excavators
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM TO STICK PIN ASSEMBLY ON CERTAIN STANDARD STICK 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 286-6528 AND 269-9928 MAIN PUMP SNUBBER LINES ON CERTAIN 330D EXCAVATORS
PRODUCT SUPPORT PROGRAM FROM REPLACING THE SEAT FOLLOWER ON CERTAIN 420E AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING JOYSTICK VIBRATION WHEN SWING ON CERTAIN 345C EXCAVATORS
Product Support Program For Replacing Linkage Pin Assemblies (PT 7-8-9-10) On Certain 345C, 365C, and 385C Excavators
PRODUCT IMPROVEMENT PROGRAM FOR ADJUSTING THE LINE RELIEF VALVE PRESSURE SETTINGS FOR THE STICK CYLINDER AND BUCKET CYLINDER ON CERTAIN 324D L and 325D L EXCAVATORS THAT ARE EQUIPPED FOR LONG REACH CONFIGURATION
Product Improvement Program For Replacing The 9T-3948 Rod Assembly For The Bucket Tilt Hydraulic Cylinder on certain 416D and 416E Backhoe Loaders
PRODUCT SUPPORT PROGRAM TO REPLACE POROUS SIDESHIFT LOCK CYLINDERS ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAUL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWING GEAR BEARING BOLTS AND SPACERS ON CERTAIN 315C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE BREATHER GROUP HOSE ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM TO STICK PIN ASSEMBLY ON CERTAIN EXTENDABLE STICK 416E, 420E, AND 430E BACKHOE LOADERS
Product Support Program For Replacing Or Reworking The Control Manifold Group On Certain 301.6C And 301.8C Mini Hydraulic Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER CLAMP THAT MAY CRACK ON CERTAIN 345CL, 365CL, 365CL FS, 365CL MH, 385C, 385C FS, 385CL, AND 385CL MH EXCAVATORS
Product Support Program For Improving Controllability On Certain 305.5 Mini Hydraulic Excavators
Product Improvement Program For Inspecting The Swing Outer Bolt On Certain 345C Excavators
PRODUCT IMPROVEMENT PROGRAM TO REMOVE STABILITY ALARM SWITCH ON CERTAIN 325D, 330D, 345C, AND 385CL EXCAVATORS (DEMOLITION CORE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXTENDABLE STICK CYLINDER TUBE ASSEMBLY ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS