PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
[REBE1503]
BASIC ENGINE
CYLINDER BLOCK GP
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
REBE1503-00
Show/hide table
| 06Dec2006 |
U-772
A-735
D-720
O-748
TT-506
TM-515
TA-504
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, AND 10R4145 LONG BLOCKS FROM DEALER PART STOCK. |
|
| 1020 1200 1201 7750 | PI70219 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
TERMINATION DATE |
| 31Dec2007 |
PROBLEM
Show/hide table
| There were some 10R4134 short blocks, 10R4139 short blocks, 10R4144 long blocks, and 10R4145 long blocks that were potentially assembled with the wrong crankshaft. |
ACTION REQUIRED
Show/hide table
| Return all 10R4134 short blocks, 10R4139 short blocks, 10R4144 long blocks, and 10R4145 long blocks that fall within the date code range of 062106 through 091506 (June 21, 2006 through September 15, 2006). The format for the date code on the box is MMDDYY. The date code will be listed on the outside of the box. A representative example is shown below. |
Show/hide table
|
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Please return the affected short blocks and long blocks to the following address: AVSpare Inc. 501 Cardinal Drive Corinth, MS 38834 ATTN: David Torok |
Information System:
PRODUCT SUPPORT PROGRAM TO REPLACE POROUS SIDESHIFT LOCK CYLINDERS ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 2361235 AND 2361237 TRACK MOTORS FROM DEALER INVENTORY
PRODUCT SUPPORT PROGRAM TO ADJUST AND PROTECT THE SIDESHIFT AND BACKHOE HOSES ON CERTAIN 422E AND 428E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM TO ADJUST AND PROTECT THE SIDESHIFT AND BACKHOE HOSES ON CERTAIN 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE 259-5049 WIRING GROUP (FOR COLD WEATHER MACHINES) OR THE 259-5040 WIRING GROUP (FOR STANDARD MACHINES) ON CERTAIN 320D EXCAVATORS
Product Improvement Program To Inspect And Replace If Necessary The 139-8736 Engine Mount On Certain 330D And 345C Excavators
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM TO STICK PIN ASSEMBLY ON CERTAIN STANDARD STICK 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 286-6528 AND 269-9928 MAIN PUMP SNUBBER LINES ON CERTAIN 330D EXCAVATORS
PRODUCT SUPPORT PROGRAM FROM REPLACING THE SEAT FOLLOWER ON CERTAIN 420E AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING JOYSTICK VIBRATION WHEN SWING ON CERTAIN 345C EXCAVATORS
Product Support Program For Replacing Linkage Pin Assemblies (PT 7-8-9-10) On Certain 345C, 365C, and 385C Excavators
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAUL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWING GEAR BEARING BOLTS AND SPACERS ON CERTAIN 315C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE BREATHER GROUP HOSE ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM TO STICK PIN ASSEMBLY ON CERTAIN EXTENDABLE STICK 416E, 420E, AND 430E BACKHOE LOADERS
Product Support Program For Replacing Or Reworking The Control Manifold Group On Certain 301.6C And 301.8C Mini Hydraulic Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER CLAMP THAT MAY CRACK ON CERTAIN 345CL, 365CL, 365CL FS, 365CL MH, 385C, 385C FS, 385CL, AND 385CL MH EXCAVATORS
Product Support Program For Improving Controllability On Certain 305.5 Mini Hydraulic Excavators
Product Improvement Program For Inspecting The Swing Outer Bolt On Certain 345C Excavators
PRODUCT IMPROVEMENT PROGRAM TO REMOVE STABILITY ALARM SWITCH ON CERTAIN 325D, 330D, 345C, AND 385CL EXCAVATORS (DEMOLITION CORE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXTENDABLE STICK CYLINDER TUBE ASSEMBLY ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
PRODUCT SUPPORT PROGRAME TO REPLACE MOTOR MOUNTING BOLTS ON CERTAIN BU115 AND BU118 UTILITY BROOMS