PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
[REBE1585]
SERVICE EQUIPMENT AND SUPPLIES
PARTS STOCK, ORDERING & RETURN
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK
REBE1585-00
Show/hide table
| 03Jan2007 |
U-4
A-4
D-4
O-4
TT-1
TM-1
TA-1
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R4274, 0R4275, 0R4278, 0R9355, 0R4277, 0R4279, AND 0R9360 LONG BLOCKS FROM DEALER PART STOCK |
|
| 1201 7750 | PI70221 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jan2008 |
PROBLEM
Show/hide table
| The head bolts on the long blocks may not be torqued correctly which could cause a head gasket failure. |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| 3408 and 3412 Remanufactured long blocks with the following sequence numbers should be returned: |
Show/hide table
|
| Image1 |
PARTS DISPOSITION
Show/hide table
| Please return the affected long blocks to the following address: AVSpare Inc. 501 Cardinal Drive Corinth, MS 38834 ATTN: David Torok |
Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXTENDABLE STICK CYLINDER TUBE ASSEMBLY ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM TO REMOVE STABILITY ALARM SWITCH ON CERTAIN 325D, 330D, 345C, AND 385CL EXCAVATORS (DEMOLITION CORE)
Product Improvement Program For Inspecting The Swing Outer Bolt On Certain 345C Excavators
Product Support Program For Improving Controllability On Certain 305.5 Mini Hydraulic Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER CLAMP THAT MAY CRACK ON CERTAIN 345CL, 365CL, 365CL FS, 365CL MH, 385C, 385C FS, 385CL, AND 385CL MH EXCAVATORS
Product Support Program For Replacing Or Reworking The Control Manifold Group On Certain 301.6C And 301.8C Mini Hydraulic Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM TO STICK PIN ASSEMBLY ON CERTAIN EXTENDABLE STICK 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE BREATHER GROUP HOSE ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWING GEAR BEARING BOLTS AND SPACERS ON CERTAIN 315C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAUL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 10R4134 SHORT BLOCKS, 10R4139 SHORT BLOCKS, 10R4144 LONG BLOCKS, and 10R4145 LONG BLOCKS FROM DEALER PART STOCK.
PRODUCT SUPPORT PROGRAM TO REPLACE POROUS SIDESHIFT LOCK CYLINDERS ON CERTAIN 422E, 428E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAME TO REPLACE MOTOR MOUNTING BOLTS ON CERTAIN BU115 AND BU118 UTILITY BROOMS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE SINGLE TILT LOADER LIFT ARM ON CERTAIN 416D, 420D, 424D AND 428D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 149-2356, 149-3253, 149-3254, 149-3255, 200-6198, AND 225-9217 CONTROL GROUPS FROM DEALER PARTS STOCK
PRODUCT IMPROEVMENT PROGRAM FOR REPLACING THE FUEL RETURN LINE ON CERTAIN 330D(L) EXCAVATORS
Product Support Program For Reworking Track Link Assemblies On Certain 365CL, 365CL FS, 365CL MH, 385C, 385CL, 385C FS, And 385CL MH Hydraulic Excavators
PRODUCT SUPPORT PROGRAM FOR REPLACING AND INSTALLING HEATING, VENTILATION, AND AIR CONDITIONING COMPONENTS ON CERTAIN 320C, 322C, 325C, 330C FORESTRY EXCAVATORS AND 511, 521, 522, 532, 541, 551, 552, TK711, TK721, TK722, TK732, TK741, TK751, TK752, 1
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BALL JOINTS ON CERTAIN BA18 ANGLE BROOMS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL STEP TO IMPROVE ACCESS ON CERTAIN 330D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BALL JOINTS ON CERTAIN BA18 ANGLE BROOMS
Product Improvement Program For Replacing Stems In The Machine Control Valve On Certain 318C, 320C, 320D, 320D RR, 321C CR, 325D, And 330D Excavators
PRODUCT SUPPORT PROGRAM FOR REWORKING BOOM FOOT CRACKING ON CERTAIN 315B AND 315C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LOAD CONTROL VALVE GROUP ON CERTAIN 301.6C AND 301.8C MINI HYDRAULIC EXCAVATORS