PRODUCT SUPPORT PROGRAM FOR ELIMINATING WHITE SMOKE ON CERTAIN 315C HYDRAULIC EXCAVATORS EQUIPPED WITH THE 3046 ENGINE
[REBE2105]
FUEL SYSTEM
PRODUCT SUPPORT PROGRAM FOR ELIMINATING WHITE SMOKE ON CERTAIN 315C HYDRAULIC EXCAVATORS EQUIPPED WITH THE 3046 ENGINE
REBE2105-00
Show/hide table
| 06Nov2007 |
U-560
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR ELIMINATING WHITE SMOKE ON CERTAIN 315C HYDRAULIC EXCAVATORS EQUIPPED WITH THE 3046 ENGINE |
|
| 1251 1290 1252 1254 | PS51380 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51380" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 28Feb2009 |
PROBLEM
Show/hide table
| 315C excavators are experiencing undesirable levels of white smoke when idling, mainly in cold climates. This issue can be resolved by installing a new injection pump and related components outlined in this Service Letter. Please note, fuel consumption will be slightly impacted as a result of performing this service letter. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 315C | AKE00190, 212 |
| 315CL | CJC00101-00134, 137-140, 142-164, 166-192, 195-269, 271-274, 276-302, 304-393, 395-415, 417-523, 525-560, 562-721, 723-820, 822-889, 891-921, 923-1001, 1004-1068, 1070-1071, 1073-1103, 1105-1107, 1109-1374, 1376-1377, 1379-1545, 1547-1637, 1639-1645, 1647-1661, 1663-1698, 1700-1741, 1743-1748, 1750, 1752-1773, 1775, 1777-1858, 1860-1923, 1925-2015, 2017-2085, 2087-2099, 2101-2108, 2110-2146, 2148-2235, 2237-2253, 2256-2269, 2271-2684, 2687-2866, 2868-2980, 2982, 2984-3080, 3083-3102, 3104, 3106-3108, 3111-3197, 3199-3237, 3239-3245, 3247-3380, 3382-3455, 3457-3623, 3625-3673, 3675-3868, 3870-3949, 3951-3981, 3983-3997, 3999-4010, 4012-4014, 4016-4020, 4022-4048, 4050, 4052-4074, 4076, 4078, 4081-4142, 4144-4167, 4169, 4172-4173, 4176-4182, 4185, 4187-4217, 4219-4306, 4308-4312, 4314-4345, 4347-4397, 4399, 4401-4402, 4404-4408, 4411-4418, 4420-4584, 4587-4650, 4652-4695, 4697-4701, 4705, 4708-4709, 4711-4729, 4731-4737, 4739, 4741-4742, 4749-4751, 4753-4762, 4764-4772, 4775-4777, 4781-4785, 4787-4788, 4794-4796, 4798-4809, 4811-4813, 4832, 4835, 4839, 4847-4870, 4873, 4877, 4881, 4889, 4894, 4896, 4898-4899, 4901, 4904, 4906-4923, 4925-4927, 4930, 4934, 4939-4946, 4948, 4951-4956, 4958, 4960-4962, 4964-4967, 4969-4970, 4972, 4977, 4979, 4982-5012, 5014, 5016-5031, 5034, 5036-5045, 5049, 5051-5053, 5060-5064, 5072-5075, 5077, 5081-5082, 5084-5092, 5095-5120, 5126-5130, 5132-5146, 5148-5151, 5153, 5156, 5161-5163, 5184-5185, 5189, 5191-5192, 5195-5259, 5261-5263, 5273, 5275, 5280, 5282-5285, 5287-5290, 5292-5419, 5421-5504, 5508-5509, 5519, 5522, 5531, 5534, 5538, 5542, 5547, 5553-5554, 5557-5558, 5561 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 1P4022 | FITTING |
| 1 | 3B4505 | LOCKWASHER-5/16 |
| 1 | 3B6488 | COUPLING-PIPE |
| 20 | 3S2093 | STRAP-CABLE |
| 2 | 5I7505 | PLUG |
| 4 | 5P0537 | WASHER-HARD |
| 36 | 5P1442 | HOSE |
| 1 | 5P7175 | NIPPLE-STRAIGHT |
| 1 | 6V5839 | WASHER-HARD |
| 1 | 6V6317 | BOLT |
| 2 | 6V8214 | BOLT |
| 1 | 7K1181 | STRAP-CABLE |
| 3 | 8T4138 | BOLT |
| 5 | 8T4200 | BOLT |
| 2 | 8T7547 | BOLT |
| 20 | 9X2380 | HOSE (BULK) |
| 1 | 0338248 | CLIP |
| 3 | 0951386 | CLAMP-HOSE |
| 3 | 0962500 | WASHER |
| 1 | 0969529 | SEAL-O-RING |
| 8 | 1228948 | CLAMP |
| 3 | 1228949 | CLAMP |
| 1 | 1992354 | BOLT |
| 1 | 2128510 | NUT |
| 1 | 2184938 | LINE AS-FUEL INJ |
| 1 | 2184940 | LINE AS-FUEL INJ |
| 1 | 2184941 | LINE AS-FUEL INJ |
| 1 | 2184942 | LINE AS-FUEL INJ |
| 1 | 2184943 | LINE AS-FUEL INJ |
| 1 | 2184944 | LINE AS-FUEL INJ |
| 1 | 2255245 | BRACKET |
| 1 | 2255248 | RETAINER |
| 1 | 2255249 | RETAINER |
| 1 | 2281868 | CLAMP |
| 2 | 2281869 | DAMPER |
| 1 | 2281870 | CLAMP |
| 2 | 2344809 | WASHER |
| 2 | 2344835 | STUD |
| 1 | 2354970 | BOLT |
| 2 | 2447127 | NUT-FLANGE |
| 3 | 2706282 | CLIP |
| 3 | 2941821 | BOLT |
| 1 | 2945060 | SEAL O RING |
| 3 | 2947251 | BOLT |
| 1 | 2974576 | SUPPORT AS |
| 1 | 2974578 | SUPPORT AS |
| 1 | 2974580 | SUPPORT AS |
| 1 | 2993052 | HARNESS AS |
| 1 | 3003867 | WASHER |
| 1 | 3003988 | SEAL O-RING |
| 1 | 3062160 | PUMP AS.-INJ |
| 1 | 3062162 | TUBE AS. |
| 1 | 3062164 | GEAR-INJ PUMP |
| 1 | 3062165 | FLANGE-INJ PUMP |
| In Order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 3% of dealership population. This is an inital order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Replace the injection pump and related fuel system components. Refer to Special Instructions REHS3808 for the Rework Procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 20.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BACKHOE BUCKET GUIDES AND MOUNTING PIN ON CERTAIN 428E, 432E AND 434E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE E-STICK ON CERTAIN 442E AND 444E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HARNESS INSTALLATION ON CERTAIN 324D L AND 325D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CONTROL GROUP HANDLE (227-7616 OR 227-7617) USED ON CERTAIN 312D, 315D, 319D, 320D, 323D, 324D, 325D, 330D, 345D, 345C, 365C, 365C FS, 385C, 385C FS, 324D FM, 325D FM, 330D FM, 325D MH, 330D MH, 365C MH, 3
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOCKWASHER IN THE COOLING UNIT FAN GROUP ON CERTAIN 365CL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE EXHAUST MUFFLER ON CERTAIN 320D, 320DRR, AND 323D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW OPERATION AND MAINTENANCE MANUAL ON CERTAIN BH27, BH30 AND BH30W BACKHOE WORK TOOLS MOUNTED ON SKID STEER LOADERS AND MULTI TERRAIN LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOADER ARM FILM ON CERTAIN 420E AND 430 IT BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 218-2197 STICK ON CERTAIN 330C HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE FLEXCOUPLING MOUNTING BOLTS ON CERTAIN M313C, M315C, M316C, M318C, M322C, M315D, M316D, M318D, & M322D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE UPPER FRAME ON CERTAIN 365CL, 365CL FS, AND 365CL MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK ON CERTAIN 385C L MATERIAL HANDLERS USED IN BARGE APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LIFT ARM LIFT CYLINDER BOSS WELD THAT MAY CRACK ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR PROVIDING SPECIAL APPLICATION BOOMS FOR CERTAIN 345B, 345B II, 345BL II, AND 345C HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A TUBE ASSEMBLY FOR THE AIR CONDITIONING SYSTEM ON CERTAIN FORESTY EXCAVATORS AND TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING IF NECESSARY THE SWING DRIVE BOLTS ON CERTAIN 330D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CYLINDER GUARDS ON CERTAIN 365B, 365C, 5090B AND 385C FRONT SHOVEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM ON CERTAIN M325C AND M325D MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REINSTALLING, IF NECESSARY, THE COUPLING HUB ON CERTAIN 330DL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOWER HITCH ARMS ON CERTAIN 414E INDUSTRIAL LOADER
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING GUSSETS ON CERTAIN DEMOLITION AND SCRAP SHEARS. CATERPILLAR MODELS S365B, S385B, AND VERACHTERT MODELS VHS-60/3, AND VHS-70/3.