PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A TUBE ASSEMBLY FOR THE AIR CONDITIONING SYSTEM ON CERTAIN FORESTY EXCAVATORS AND TRACK FELLER BUNCHERS
[REBE2120]
OPERATOR STATION
AIR CONDITIONER GP
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A TUBE ASSEMBLY FOR THE AIR CONDITIONING SYSTEM ON CERTAIN FORESTY EXCAVATORS AND TRACK FELLER BUNCHERS
REBE2120-02
Show/hide table
| 23Jul2007 |
| (Revised 19Sep2007) |
U-348
A-287
D-291
O-314
Show/hide table
| Safety Parts stock action needed | PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A TUBE ASSEMBLY FOR THE AIR CONDITIONING SYSTEM ON CERTAIN FORESTY EXCAVATORS AND TRACK FELLER BUNCHERS |
|
| 7320 | PI10613 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible.
When reporting the repair, use "PI10613" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim
Description Code and "T" as the SIMS Description Code.
|
Show/hide table
Show/hide table
| NOTE: | This Revised Service Letter replaces the 23Jul2007 (Revised July 2007) Service Letter. Changes have been made to the Track Feller Buncher Affected Product. |
Show/hide table
PROBLEM
Show/hide table
| The existing 251-6772 Tube Assembly needs to be replaced on certain Foresty Excavators and Track Feller Bunchers. The small shoulder on the tube creates the potential for sudden large release of refrigerant into the cab environment which can cause or may result in personal injury or death. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 1190 | BZK01220, 2160-2162 |
| 1190T | BZL01320-01321, 2210 |
| 1390 | B3F00205, 2310-2312 |
| 320C FM HW | SAH01001-01238, 1240-1242, 1244-1246, 1248-1252 |
| 320C FM ST | TBR01001-01030 |
| 320D FM HW | EAX00161 |
| 322C FM HW | C3R01001-01028 LAR01001-01050 |
| 322C FM LGP | BYL01001-01008 |
| 322C FM ST | M2H01001-01005 |
| 324D FM | JKR00163-00178 |
| 324D FM HEEL | JLS00152-00173 |
| 324D FM LGP | JGK00127-00128 |
| 325C FM HW | M2K01001-01015 S3M01001-01019 |
| 325C FM ST | G1L01001 |
| 325D FM | C7K00192-00202 |
| 325D FM BUTT N | C9M00133-00138 |
| 325D FM HEEL | C8L00153-00166 |
| 330C FM HW | B1K01001-01027 B4N01001-01018 |
| 330C FM ST | B3M01001 |
| 330D FM | L2K00215-00221 |
| 330D FM BUTT N | E4K00236-00238, 350 |
| 330D FM HEEL | H3K00225-00234, 350-353 |
| 511 | 51100265-00286 |
| 521 | 52100295-00314 |
| 522 | 52200235-00246 |
| 532 | 53200175-00176 |
| 541 | 54100205-00211 |
| 551 | 55100115-00116 |
| 552 | 55200145 |
| TK711 | 10100245-00276 |
| TK721 | 10200345-00367 |
| TK722 | 10300445-00467 |
| TK732 | 10400545-00549 |
| TK741 | 20200225-00233 |
| TK752 | 30200425 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 9X7378 | SEAL-O-RING |
| 1 | 2844177 | TUBE AS |
ACTION REQUIRED
Show/hide table
Remove all 251-6772 from dealer parts stock. |
Show/hide table
| Evacuate the refrigerant. Replace the 251-6772 Tube Assembly (red tube in image) with a 284-4177 Tube Assembly and a new 9X-7378 O-ring. Re-charge the system. |
Show/hide table
|
| Image1 |
OWNER NOTIFIAVSION
Show/hide table
| U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table
|
Submit one claim for all parts removed from dealer parts stock. |
Show/hide table
Show/hide table
| NOTE: This is a 2.0-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
Show/hide table
| COPY OF OWNER NOTIFIAVSION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 SAFETY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A TUBE ASSEMBLY FOR THE AIR CONDITIONING SYSTEM ON CERTAIN FORESTY EXCAVATORS AND TRACK FELLER BUNCHERS MODELS INVOLVED - 320C FM, 320D FM, 322C FM, 324D FM, 330C FM, 330D FM, TK711, TK721, TK722, TK732, TK741, TK751, TK752, 511, 521, 522, 532, 541, 551, 552 Dear AVSpare Product Owner: The 251-6772 Tube Assembly needs to be replaced on the products listed below. The existing tube can fail to hold the o-ring in place creating the potential for sudden large release of refrigerant into the cab environment which can cause or may result in personal injury or death. You will not be charged for the service performed. Contact your local AVSpare dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 23Jul2007 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed for your added safety and satisfaction. AVSpare Inc. Identification #(s) Attached to 23Jul2007 Service Letter |
Information System:
PRODUCT SUPPORT PROGRAM FOR PROVIDING SPECIAL APPLICATION BOOMS FOR CERTAIN 345B, 345B II, 345BL II, AND 345C HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LIFT ARM LIFT CYLINDER BOSS WELD THAT MAY CRACK ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK ON CERTAIN 385C L MATERIAL HANDLERS USED IN BARGE APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR ELIMINATING WHITE SMOKE ON CERTAIN 315C HYDRAULIC EXCAVATORS EQUIPPED WITH THE 3046 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BACKHOE BUCKET GUIDES AND MOUNTING PIN ON CERTAIN 428E, 432E AND 434E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE E-STICK ON CERTAIN 442E AND 444E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HARNESS INSTALLATION ON CERTAIN 324D L AND 325D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CONTROL GROUP HANDLE (227-7616 OR 227-7617) USED ON CERTAIN 312D, 315D, 319D, 320D, 323D, 324D, 325D, 330D, 345D, 345C, 365C, 365C FS, 385C, 385C FS, 324D FM, 325D FM, 330D FM, 325D MH, 330D MH, 365C MH, 3
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOCKWASHER IN THE COOLING UNIT FAN GROUP ON CERTAIN 365CL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE TRUNNION BOLTS ON CERTAIN M313C, M315C, M316C, M318C, AND M318D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE EXHAUST MUFFLER ON CERTAIN 320D, 320DRR, AND 323D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW OPERATION AND MAINTENANCE MANUAL ON CERTAIN BH27, BH30 AND BH30W BACKHOE WORK TOOLS MOUNTED ON SKID STEER LOADERS AND MULTI TERRAIN LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING IF NECESSARY THE SWING DRIVE BOLTS ON CERTAIN 330D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CYLINDER GUARDS ON CERTAIN 365B, 365C, 5090B AND 385C FRONT SHOVEL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM ON CERTAIN M325C AND M325D MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REINSTALLING, IF NECESSARY, THE COUPLING HUB ON CERTAIN 330DL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOWER HITCH ARMS ON CERTAIN 414E INDUSTRIAL LOADER
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING GUSSETS ON CERTAIN DEMOLITION AND SCRAP SHEARS. CATERPILLAR MODELS S365B, S385B, AND VERACHTERT MODELS VHS-60/3, AND VHS-70/3.
PRODUCT IMPROVEMENT PROGRAM TO TIGHTEN THE SWING GEAR AND BEARING MOUNTING BOLTS ON CERTAIN 324D, 324D FM, 324D MH, 325D, 325D FM, 325D MH, 330D, 330D FM, 330D MH, 345C, AND 345C MH EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVES ON CERTAIN 312C, 315C, 318C, AND 319C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CROSSOVER RELIEF VALVE ON CERTAIN M312, M313C, M313D, M315, M315C, M315D, M316C, M316D, M318, M318C, M318D, M320, M322C, AND M322D WHEELED EXCAVATORS