PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
[REBE2222]
ELECTRICAL AND STARTING SYSTEM
WIRING GP
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
REBE2222-00
Show/hide table
| 18Jul2007 |
U-336
A-276
D-282
O-305
Show/hide table
| Parts stock action only | PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK |
|
| 1808 1408 7320 1802 7750 | PI70236 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Oct2007 |
PROBLEM
Show/hide table
| A Manufacturing Problem with switches in the affected date code could cause the switch to open after being heat cycled. This will result in the AC compressor not turning on when the system has adequate pressure. |
ACTION REQUIRED
Show/hide table
| Sort Stock and remove the 114-5333, 114-5334, and 180-5462 Switches with the four digit date code range of 6152 - 6334 (image 1) from dealer stock. The date code will be in the form of NNNNXX, where NNNN is the date code you are sorting for. Disregard the letters (XX). |
Show/hide table
|
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOWER HITCH ARMS ON CERTAIN 414E INDUSTRIAL LOADER
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REINSTALLING, IF NECESSARY, THE COUPLING HUB ON CERTAIN 330DL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM ON CERTAIN M325C AND M325D MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CYLINDER GUARDS ON CERTAIN 365B, 365C, 5090B AND 385C FRONT SHOVEL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING IF NECESSARY THE SWING DRIVE BOLTS ON CERTAIN 330D L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A TUBE ASSEMBLY FOR THE AIR CONDITIONING SYSTEM ON CERTAIN FORESTY EXCAVATORS AND TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR PROVIDING SPECIAL APPLICATION BOOMS FOR CERTAIN 345B, 345B II, 345BL II, AND 345C HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LIFT ARM LIFT CYLINDER BOSS WELD THAT MAY CRACK ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK ON CERTAIN 385C L MATERIAL HANDLERS USED IN BARGE APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR ELIMINATING WHITE SMOKE ON CERTAIN 315C HYDRAULIC EXCAVATORS EQUIPPED WITH THE 3046 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BACKHOE BUCKET GUIDES AND MOUNTING PIN ON CERTAIN 428E, 432E AND 434E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING GUSSETS ON CERTAIN DEMOLITION AND SCRAP SHEARS. CATERPILLAR MODELS S365B, S385B, AND VERACHTERT MODELS VHS-60/3, AND VHS-70/3.
PRODUCT IMPROVEMENT PROGRAM TO TIGHTEN THE SWING GEAR AND BEARING MOUNTING BOLTS ON CERTAIN 324D, 324D FM, 324D MH, 325D, 325D FM, 325D MH, 330D, 330D FM, 330D MH, 345C, AND 345C MH EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVES ON CERTAIN 312C, 315C, 318C, AND 319C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CROSSOVER RELIEF VALVE ON CERTAIN M312, M313C, M313D, M315, M315C, M315D, M316C, M316D, M318, M318C, M318D, M320, M322C, AND M322D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EDGE ASSEMBLY ON CERTAIN 365 (FRONT SHOVEL) AND 385 EXCAVATOR BUCKETS WITH BUCKET PREFIX H1A.
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE TURBO HOSE CLAMP ON CERTAIN 323D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC ROTATOR ON CERTAIN GSH15 GRAPPLES (PREFIX HGK, TOPLEVEL 231-0203)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR SERVICE DOOR ON CERTAIN 324D, 325D AND 325DL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOADER PILOT VALVE ON CERTAIN 420E, 430E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REROUTING THE STICK CYLINDER HEAD END HOSE ASSEMBLY ON CERTAIN 416E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LIFT ARM CYLINDER BOSS WELD THAT MAY CRACK ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS