PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC ROTATOR ON CERTAIN GSH15 GRAPPLES (PREFIX HGK, TOPLEVEL 231-0203)
[REBE2290]
WORK TOOL ARRANGEMENT
GRAPPLE AR
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC ROTATOR ON CERTAIN GSH15 GRAPPLES (PREFIX HGK, TOPLEVEL 231-0203)
REBE2290-00
Show/hide table
| 19Dec2007 |
U-670
D-546
Show/hide table
| Priority Parts stock action needed | PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC ROTATOR ON CERTAIN GSH15 GRAPPLES (PREFIX HGK, TOPLEVEL 231-0203) |
|
| 6326 6307 | PI31418 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI31418" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31418" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| 30Jun2008 | 31Dec2008 |
PROBLEM
Show/hide table
| Random failure of the GSH15 Heavy Duty Orange Peel Grapple rotator occurs within a limited number of operating hours. The result is a total loss of the rotator. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| GSH15 | HGK00100-00102, 107-108, 111, 113, 115-116 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 2903180 | LINK GP-GRAPPLE (as required) |
| 1 | 2924774 | LINK GP-GRAPPLE (as required) |
| 1 | 2928522 | LINK GP-GRAPPLE (as required) |
| 1 | 2928523 | LINK GP-GRAPPLE (as required) |
| 1 | 2982343 | LINK GP-GRAPPLE (as required) |
| 1 | 2983534 | LINK GP-GRAPPLE (as required) |
| 1 | 3169043 | ROTATOR GP-MOD |
| 1 | SEBP3550 | PARTSMANUAL GSH15 Heavy Duty (as required) |
| 1 | SEBU7633 | OMM GSH15 Heavy Duty (as required) |
| In Order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 40% of dealership population. This is an inital order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
Remove all 211-7399 from dealer parts stock. |
Show/hide table
| Replace 211-7399 with 316-9043 (4 shells) Rotator Modification GP. Ordering of a new Link GP is required as the current Link GP does not fit the Rotator Modification GP. Please use the enclosed chart to select the Link GP as needed. The customer grapple should not be disassembled unless both the Rotator Modification GP and the replacement Link GP are available at the dealer site. Refer to special instructions REHS3956 for replacement instructions. Order new media (OMM & PM) when replacement is completed. Partsmanual: SEBP3550 Operating & Maintenance Manual: SEBU 7633 |
Show/hide table
|
| Image1 |
OWNER NOTIFIAVSION
Show/hide table
| U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table
|
Submit one claim for all parts removed from dealer parts stock. |
Show/hide table
Show/hide table
| NOTE: This is a 9.0-hour job | |||||
| NOTE: ONE LINK GP CAN BE CLAIMED FOR EACH ROTATOR THAT HAS BEEN REPLACED |
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
| For NACD |
Show/hide table
|
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
| For NACD |
Show/hide table
|
Show/hide table
| COPY OF OWNER NOTIFIAVSION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC ROTATOR CERTAIN GSH15 ORANGE PEEL GRAPPLES MODELS INVOLVED - GSH15 Heavy Duty Orange Peel Grapples (HGK prefix only). Dear AVSpare Product Owner: The current Rotator GP. 211-7399 on your GSH15 Heavy Duty Configuration needs to be replaced. This Rotator can fail at random, causing unexpected downtime. You will not be charged for the service performed. Contact your local AVSpare dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 19Dec2007 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. AVSpare Inc. Identification #(s) Attached to 19Dec2007 Service Letter |
Information System:
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE TURBO HOSE CLAMP ON CERTAIN 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EDGE ASSEMBLY ON CERTAIN 365 (FRONT SHOVEL) AND 385 EXCAVATOR BUCKETS WITH BUCKET PREFIX H1A.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CROSSOVER RELIEF VALVE ON CERTAIN M312, M313C, M313D, M315, M315C, M315D, M316C, M316D, M318, M318C, M318D, M320, M322C, AND M322D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVES ON CERTAIN 312C, 315C, 318C, AND 319C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM TO TIGHTEN THE SWING GEAR AND BEARING MOUNTING BOLTS ON CERTAIN 324D, 324D FM, 324D MH, 325D, 325D FM, 325D MH, 330D, 330D FM, 330D MH, 345C, AND 345C MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING GUSSETS ON CERTAIN DEMOLITION AND SCRAP SHEARS. CATERPILLAR MODELS S365B, S385B, AND VERACHTERT MODELS VHS-60/3, AND VHS-70/3.
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOWER HITCH ARMS ON CERTAIN 414E INDUSTRIAL LOADER
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REINSTALLING, IF NECESSARY, THE COUPLING HUB ON CERTAIN 330DL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM ON CERTAIN M325C AND M325D MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR SERVICE DOOR ON CERTAIN 324D, 325D AND 325DL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LOADER PILOT VALVE ON CERTAIN 420E, 430E, 432E, 434E, 442E, AND 444E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REROUTING THE STICK CYLINDER HEAD END HOSE ASSEMBLY ON CERTAIN 416E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE LIFT ARM CYLINDER BOSS WELD THAT MAY CRACK ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REMOVING THE CHECK VALVE IN THE QUICK COUPLER LINE ON CERTAIN 320C, 322C, 325C, 330C, 320D, 324D, 325D, 330D, AND 345C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR CHANGING TWO PORTS ON THE MEDIUM PRESSURE SWIVEL ON CERTAIN M313C, M313D, M315C, M315D, M316C, M316D, M318C, M318D, M322C, M322D, M325C, AND 325D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REROUTING THE BOOM CYLINDER ROD END HOSE ON CERTAIN 420E AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW BOOM ASSEMBLY ON CERTAIN 305.5 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BOOM FOOT AREA WHICH MAY CRACK ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SECONDARY ENGINE SHUTDOWN SWITCH ON CERTAIN 325D, 330D, M325D L MH, M325D MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DOOR LOCK ROD ASSEMBLY ON CERTAIN 303C CR, 303.5C CR, 304C CR, AND 305C CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER RADIATOR CORE ON CERTAIN 345C, 345CL AND 345C MH HYDRAULIC EXCAVATORS