PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SECONDARY ENGINE SHUTDOWN SWITCH ON CERTAIN 325D, 330D, M325D L MH, M325D MH EXCAVATORS Caterpillar

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SECONDARY ENGINE SHUTDOWN SWITCH ON CERTAIN 325D, 330D, M325D L MH, M325D MH EXCAVATORS [REBE2376]

ELECTRICAL AND STARTING SYSTEM

SWITCH GP

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SECONDARY ENGINE SHUTDOWN SWITCH ON CERTAIN 325D, 330D, M325D L MH, M325D MH EXCAVATORS

REBE2376-01

Show/hide table

18Sep2007

(Revised 17Apr2009)

U-460

A-551

O-398

Show/hide table

*Safety*	PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SECONDARY ENGINE SHUTDOWN SWITCH ON CERTAIN 325D, 330D, M325D L MH, M325D MH EXCAVATORS
1416 1408		PI10625

Show/hide table

NOTE:

This Program must be administered as soon as possible. When reporting the repair, use "PI10625" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code.
Exception: If the repair is done after failure, use "PI10625" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

Show/hide table


NOTE:	This Revised Service Letter replaces the 18Sep2007 Service Letter. Changes have been made to the Mail Codes and to the Affected Product.

Show/hide table

PROBLEM

Show/hide table

The 4D-1836 Secondary Engine Shutdown Switch needs to be replaced on certain 325D, 330D, M325D L MH, M325D MH Excavators. The existing shutdown switch can be accidently activated by a falling rod used for locking the batteries compartment door. If the engine is shut down while the machine is used with a magnet attachment, the load that is carried can be dropped which may cause serious injury.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
325D	GBR00132, 134, 137, 141, 146-148, 150, 152, 154, 162
330D	THJ00245, 247-255, 261-262, 264, 266-268, 270, 273-274, 276, 281-282, 285-287, 289-291, 310-311, 313, 316
M325D L MH	KAY00231-00233, 235, 237-238, 240-241, 243-246 KGG00211-00212, 221-227
M325D MH	EDF00221-00226, 229-232, 234-235, 240-256

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
2	8T8737	PLUG-SEAL
1	1552271	PLUG KIT-CONN
1	1586634	SWITCH AS-TOGGLE
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 40% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table

Replace the 4D-1836 Secondary Engine Shutdown Switch with a 158-6634 Secondary Engine Shutdown Switch. Refer to the attached Rework Procedure.

Show/hide table

OWNER NOTIFIAVSION

Show/hide table

U.S. and Canadian owners will receive the attached Owner Notification.

SERVICE CLAIM ALLOWANCES

Show/hide table

AVSpare		Dealer Suggested		Customer Suggested
Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
100%	100%	0%	0%	0%	0%

Show/hide table

NOTE: This is a 1.0-hour job

Show/hide table

PARTS DISPOSITION

Show/hide table

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.

Show/hide table

COPY OF OWNER NOTIFIAVSION FOR U.S. AND CANADIAN OWNERS

XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999

SAFETY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SECONDARY ENGINE SHUTDOWN SWITCH

MODELS INVOLVED - 325D, 330D, M325D L MH, M325D MH EXCAVATORS

Dear AVSpare Product Owner:

The 4D-1836 Secondary Engine Shutdown Switch needs to be replaced on the products listed below. The existing shutdown switch can be accidently activated by a falling rod used for locking the batteries compartment door. If the engine is shut down while the machine is used with a magnet attachment, the load that is carried can be dropped which may cause serious injury. You will not be charged for the service performed.

Contact your local AVSpare dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.

Please refer the dealer to their Service Letter dated 18Sep2007 when scheduling this service.

We regret the inconvenience this may cause you, but urge you to have this service performed for your added safety and satisfaction.

AVSpare Inc.

Identification #(s)

Attached to 18Sep2007 Service Letter

Rework Procedure

Show/hide table

Replace the secondary engine shutdown switch 4D-1836 by new secondary engine shutdown switch 158-6634

Image1.1.1

Image1.1.2

Image1.1.3

Replace old DT connector 3E3364 by new DT connector kit 155-2271

Image1.2.1

Remove wires with their pin from old connector 3E3364 and connect them with the new connector 155-2271. Connect a wire in the position 1 of connector and connect the second wire in the position 2 of the connector. Fill the 2 others position (3 and 4) of the connector with plug 8T-8737.