PRODUCT SUPPORT PROGRAM FOR REWORKING THE DEDICATED COUPLER HYDRAULIC KIT ON CERTAIN HEX MACHINES EQUIPPED WITH A DEDICATED WEDGE LOCK COUPLER
[REBE2465]
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
PRODUCT SUPPORT PROGRAM FOR REWORKING THE DEDICATED COUPLER HYDRAULIC KIT ON CERTAIN HEX MACHINES EQUIPPED WITH A DEDICATED WEDGE LOCK COUPLER
REBE2465-00
Show/hide table
| 02Nov2007 |
U-555
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REWORKING THE DEDIAVSED COUPLER HYDRAULIC KIT ON CERTAIN HEX MACHINES EQUIPPED WITH A DEDIAVSED WEDGE LOCK COUPLER |
|
| 5057 6129 | PS42544 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42544" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Nov2008 |
PROBLEM
Show/hide table
| The existing hydraulic hoses can kink and fail on 320D through 330D machines equipped with a Dedicated Wedge Lock Coupler. The hydraulic hose routing may bind within the link and coupler. These machines must be configured with a solid "H" link for the binding to occur. A new hose routing has been designed which redirects the coupler jumper lines by 180 degrees to prevent kinking of the hoses. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| QC WEDGE LOCK | BBM00584, 599-607 D1G00100-00107, 111-124, 126 D1H00102-00137, 139-154, 156-158, 160 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3169108 | CONTROL AR |
ACTION REQUIRED
Show/hide table
| Apply Special Instruction REHS3911. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-36 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STRAIGHT TRAVEL CONTROL PEDAL ON CERTAIN 365CL, 365CL SF, 385C, 385CL, AND 385C FS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVES ON CERTAIN 312C, 315C, 318C, AND 319C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING PUMP TUBE ON CERTAIN 365B, 365B SERIES II, 365C, 385B, 385C AND 5090B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING STICK CYLINDER HOSE FIXATION SYSTEM ON CERTAIN 365B L SERIES II AND 365C L FRONT SHOVELS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER RADIATOR CORE ON CERTAIN 345C, 345CL AND 345C MH HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DOOR LOCK ROD ASSEMBLY ON CERTAIN 303C CR, 303.5C CR, 304C CR, AND 305C CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SECONDARY ENGINE SHUTDOWN SWITCH ON CERTAIN 325D, 330D, M325D L MH, M325D MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BOOM FOOT AREA WHICH MAY CRACK ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW BOOM ASSEMBLY ON CERTAIN 305.5 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REROUTING THE BOOM CYLINDER ROD END HOSE ON CERTAIN 420E AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR CHANGING TWO PORTS ON THE MEDIUM PRESSURE SWIVEL ON CERTAIN M313C, M313D, M315C, M315D, M316C, M316D, M318C, M318D, M322C, M322D, M325C, AND 325D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REMOVING THE CHECK VALVE IN THE QUICK COUPLER LINE ON CERTAIN 320C, 322C, 325C, 330C, 320D, 324D, 325D, 330D, AND 345C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BLOCKING BAR ASSEMBLY ON CERTAIN PIN GRABBER QUICK COUPLERS INSTALLED ON 330D MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE TOOL BOX DOOR PIN ON CERTAIN M325C MH, M325D L MH, M325D MH WHEEL MATERIAL HANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BLOCKING BAR ASSEMBLY ON CERTAIN PIN GRABBER QUICK COUPLERS INSTALLED ON 324D AND 325D MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER BRACKET ASSEMBLY ON CERTAIN 365CL, 365CL FS, AND 365CL MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HARNESS AND RELAY ON CERTAIN 414E INDUSTRIAL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TUBE ASSEMBLY AND HOSE ASSEMBLIES FOR THE HAMMER LINE ON CERTAIN 320C(L) AND 321C(L) EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR RE-INSTALLING STABILITY (VERTICAL TILT) ALARM SWITCH ON CERTAIN 325D, 330D, 345C, 365C AND 385C HYDRAULIC EXCAVATORS, EQUIPPED WITH ULTRA HIGH DEMOLITION ATTACHMENT
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STICK LOWERING CHECK VALVE ON CERTAIN 315C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A WARNING FILM ON THE PIPE CONNECTED TO THE BOOM LOWER CHECK VALVE (BLCV) ON CERTAIN 365B, 365B SERIES II, 385B AND 385C
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER ON CERTAIN TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B, AND TH580B TELEHANDLERS; AND ON CERTAIN CIPI POWER MODULES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ROUTING OF THE ENGINE FUEL LINE TUBE ON CERTAIN 330D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING STICK CYLINDER HYDRAULIC HOSE ASSEMBLIES AND TUBE ASSEMBLIES, IF CRACKED, ON CERTAIN 345C(L) EXCAVATORS