PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING TURBOCHARGER CARTRIDGES IN DEALER INVENTORY
[REBE2860]
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING TURBOCHARGER CARTRIDGES IN DEALER INVENTORY
REBE2860-00
Show/hide table
| 18Oct2007 |
U-525
A-429
D-423
O-454
TM-20
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING TURBOCHARGER CARTRIDGES IN DEALER INVENTORY |
|
| 1053 1052 7750 | PI70241 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jan2008 |
PROBLEM
Show/hide table
| Certain turbocharger cartridges may have been damaged during shipment. This damage can include damage to the compressor or turbine blades, and/or rusted or broken compressor backing plates. |
ACTION REQUIRED
Show/hide table
| Inspect all of the following parts in dealer parts stock: 125-2052, 125-2054, 125-2056, 125-2057, 122-0353, 125-2053, 125-2061, 161-4088, 165-4194, 252-1434, 125-2058, 125-2060, 129-7634, 167-9539, 173-1937, 177-1009, 177-4166, 188-4610, 125-2059, 191-8359, 248-6588, 252-1420, 252-1435, 252-5042, 252-5052, 252-5053, 273-2104, 273-2114, 285-0121, 177-1010, 0R6563, 0R6565, 0R6564, 0R9808, 0R9809, 0R9810, 0R7566. All parts determined to have been damaged during shipment need to be removed from dealer parts stock. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Return parts to the address below to the attention of: Clark Hopkins | |||||||
| For NACD |
Show/hide table
|
Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING CERTAIN MANUAL PIN GRABBER QUICK COUPLERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE MAIN RELIEF VALVE ON CERTAIN 323D, 324D AND 325D EXCAVATORS THAT ARE EQUIPPED WITH DITCH CLEANING FRONT PARTS (SUPER LONG REACH)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 285-1188 JOYSTICK ON CERTAIN 414E INDUSTRIAL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING THE LOWER SWING FRAME PIN NUT ON CERTAIN 416E, 420E AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE OIL FILLER TUBE ON CERTAIN M313C AND M315C WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CHAIN TENSIONER GROUP ON CERTAIN T6B, T9B, AND T15B TRENCHERS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTNENING THE FUEL HOSE CONNECTOR ON CERTAIN 345C AND 345CL HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING STICK CYLINDER HYDRAULIC HOSE ASSEMBLIES AND TUBE ASSEMBLIES, IF CRACKED, ON CERTAIN 345C(L) EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE ROUTING OF THE ENGINE FUEL LINE TUBE ON CERTAIN 330D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER ON CERTAIN TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B, AND TH580B TELEHANDLERS; AND ON CERTAIN CIPI POWER MODULES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A WARNING FILM ON THE PIPE CONNECTED TO THE BOOM LOWER CHECK VALVE (BLCV) ON CERTAIN 365B, 365B SERIES II, 385B AND 385C
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE STICK LOWERING CHECK VALVE ON CERTAIN 315C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME JOINT ON CERTAIN 416D, 420D, AND 430D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR VERIFYING THE SWING DRIVE BOLTS (7X-2576) ON CERTAIN 345C EXCAVATORS ARE TORQUED CORRECTLY
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TAPERED PIN AND RELATED HARDWARE FOR THE LOWER SWING FRAME ON CERTAIN 416E, 420E AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE LOWER FRAME TOP RING ON CERTAIN M325D AND M325D L MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FINAL DRIVE CARRIER ASSEMBLY ON CERTAIN 330DL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE IDLER GROUP SUPPORT ON CERTAIN 385B, 385C AND 5090B EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 207-6464 OR 245-5253 SUPPORT ASSEMBLY ON CERTAIN 385B, 385BL, 5090B, 385C, 385CL, 385C FS, 385CL MH HYDRAULIC EXCAVATORS AND 385B AND 385C OEM PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ASSEMBLY ON CERTAIN 330D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ASSEMBLY ON CERTAIN 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HOSE ASSEMBLIES ON THE HOE ON CERTAIN 416E, 420E, AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROPS FILM ON CERTAIN 414E INDUSTRIAL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWING DRIVE AND SWING MOTOR GROUP ON CERTAIN 320C AND 320D EXCAVATORS