EPC Parts Catalogs

PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRAME ON CERTAIN 312 LINKAGE PIN GRABBER QUICK HITCH HEX COUPLERS Caterpillar


  1. Home
  2. Service Letter-NACD
  3. #2507
`
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRAME ON CERTAIN 312 LINKAGE PIN GRABBER QUICK HITCH HEX COUPLERS [REBE4759]
WORK TOOLS
COUPLER GP-QUICK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRAME ON CERTAIN 312 LINKAGE PIN GRABBER QUICK HITCH HEX COUPLERS
REBE4759-00

Show/hide table
18Dec2008


U-655
D-557

 
Show/hide table
Before/After
  
  

PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRAME ON CERTAIN 312 LINKAGE PIN GRABBER QUICK HITCH HEX COUPLERS
6129 6700
PS42856
Show/hide table
NOTE:

This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42856" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Show/hide table
NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst.
Show/hide table

Show/hide table

TERMINATION DATE
31Dec2009

PROBLEM

Show/hide table
The existing 312 Linkage Pin Grabber Quick Hitch HEX Coupler frame can contact the torque tube on certain 312 buckets. If the coupler frame contacts the bucket torque tube it can cause limited clearance that prevents the insertion of the coupler's manual locking pin.

AFFECTED PRODUCT

Show/hide table
Model Identification Number
PIN GRABBER APD-312  C1C10003-10047

PARTS NEEDED

Show/hide table
No parts needed for this program

ACTION REQUIRED

Show/hide table
Rework the affected coupler per the Special Instruction REHS3875.
Show/hide table

SERVICE CLAIM ALLOWANCES

Show/hide table
Product smu/age whichever comes first
AVSpare
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
0-20000 hrs,
0-120 mo 
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
Show/hide table
 NOTE: This is a 3.5-hour job

Show/hide table


PARTS DISPOSITION

Show/hide table
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 
 
 

Information System:

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 109-4440 PLUG ON ALL MP20 AND VT40 MULTIPROCESSORS
PRODUCT SUPPORT PROGRAM TO INSPECT AND REPLACE THE FUEL HOSE CONDUIT ON CERTAIN 345D L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE MAIN CONTROL VALVE ON CERTAIN 345C, 345CL, 345D AND 345DL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE HYDRAULIC CYLINDER RODS ON CERTAIN 319D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE CAB AIR DUCT ASSEMBLIES ON CERTAIN 321D AND 328D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER ON CERTAIN 414E, 416E, 420E, 422E, 428E, 430E, 432E, AND 442E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL STEER SYSTEM ON CERTAIN 432E, 434E, 442E AND 444E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM TO REPLACE THE 194-0820 BLOCK ON CERTAIN 330D L, 336D L, AND 330D MH FCR EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER PISTON ON CERTAIN 416E, 422E, 428E, 432E, AND 434E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PIN ASSEMBLIES ON CERTAIN 330D AND 336D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR RE-TIGHTENING THE 292-7595 OR 292-7590 TUBE ASSEMBLY ON CERTAIN 319D L AND 319D LN EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVES ON CERTAIN 315D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPLACING THE BOLT USED TO ATTACH THE 235-8862 MOUNT ASSEMBLY ON CERTAIN 325D MH FCR, 325D MH HCR, 330D MH FCR, 345C MH FCR, AND 345C MH HCR MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRAME ON CERTAIN PW2708-H QUICK COUPLERS WITH PREFIX CJE AND DDK (P/N 193-8526 AND 216-1270)
PRODUCT SUPPORT PROGRAM FOR INSPECTING, AND IF NECESSARY REPLACING, THE 179-2203 OUTER BOLTS OF THE SWING GEAR BEARING ON CERTAIN 365B, 365B SERIES II AND 365C EXCAVATORS THAT ARE CONFIGURED FOR MATERIAL HANDLING, ULTRA HIGH DEMOLITION OR OEMS APPLIC
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ON CERTAIN 365CL HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE PLATE REGARDING THE ENGINE POWER RATING ON CERTAIN 315D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING ECCENTRIC SHAFT BEARINGS ON CERTAIN CVP110 VIBRATORY PLATE COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL MANIFOLD (RAIL) ON CERTAIN C6.6 INDUSTRIAL ENGINES AND C6.6 ENGINES INSTALLED IN VARIOUS APPLICATIONS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC CYLINDERS ON CERTAIN 319D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE STICK AND BOOM CONTROL VALVE ON CERTAIN 303C CR, 303.5C CR, 304C CR, AND 305C CR EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING BUCKETS ON CERTAIN 312C, 312D, 315C, AND 315D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT IDLER GROUP ON CERTAIN 385B AND 385C EXCAVATORS