EPC Parts Catalogs

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE AIR INLET HOSES ON CERTAIN 330D EXCAVATORS Caterpillar


  1. Home
  2. Service Letter-Australia
  3. #2542
`
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE AIR INLET HOSES ON CERTAIN 330D EXCAVATORS [REBE5119]
AIR INLET AND EXHAUST SYSTEM
LINES GP-AIR
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE AIR INLET HOSES ON CERTAIN 330D EXCAVATORS
REBE5119-00

Show/hide table
05Aug2009


A-243
D-251
O-258

 
Show/hide table
Before/After
  
  

PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE AIR INLET HOSES ON CERTAIN 330D EXCAVATORS
1071
PS42954
Show/hide table
NOTE:

This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42954" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Show/hide table
NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your AVSpare product analyst.
Show/hide table
Show/hide table

Show/hide table

TERMINATION DATE
31Aug2011

PROBLEM

Show/hide table
The existing engine air inlet hoses can experience cracks on certain 330D Excavators. If the hoses crack, the engine performance could be affected.

AFFECTED PRODUCT

Show/hide table
Model Identification Number
330D EAH00365-00366, 372, 374-1487

FFK00196-00479

PARTS NEEDED

Show/hide table

Qty

 Part Number Description
1 2666216 HOSE
1 2813515 HOSE
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 9% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table
Replace both of the hoses that are shown in Images 1 and 2.
Show/hide table
Image1
Image2

SERVICE CLAIM ALLOWANCES

Show/hide table
Product smu/age whichever comes first
AVSpare
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
0-6000 hrs,
0-24 mo 
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
6001-8000 hrs,
25-36 mo 
33.0%
50.0%
0.0%
0.0%
50.0%
50.0%
Show/hide table
 NOTE: This is a 0.5-hour job

Show/hide table


PARTS DISPOSITION

Show/hide table
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 
 
 

Information System:

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING REMANUFACTURED 3508, 3512, 3516, AND 3524 CYLINDER HEADS (10R7765) THAT HAVE BEEN RECEIVED AT DEALERSHIPS WITH INCORRECT VALVE SPRINGS, ROTOCOILS, AND WASHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR CORE ASSEMBLY ON CERTAIN 324D, 325D, AND M325D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR CORE ASSEMBLY AND ENGINE COOLANT TEMPERATURE REGULATOR ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED PUMP COUPLING ON CERTAIN 345C HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LEAKING BOOM CYLINDER ASSEMBLY ON CERTAIN 385C FS AND 5090B HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE UPPER SWING FRAME PIN ON CERTAIN 420E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LEAKING STICK CYLINDER ASSEMBLY ON CERTAIN 365BL, 365BL SERIES II AND 365CL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB AIR CONDITIONER INLET DUCT ON CERTAIN 314D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VALVE SEAT IN THE IMPLEMENT PUMP CONTROLLER ON CERTAIN M313D, M315D, M316D, M318D, M318D MH, M322D, AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE IMPROVED OVERLOAD WARNING SWITCH KIT ON CERTAIN M313C, M313D, M315C, M315D, M316C, M316D, M318C, M318D, M318C MH, M318D MH, M322C, M322D, M322C MH, AND M322D MH WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 OEM ENGINES; AND C7 AND C9 ENGINES INSTALLED IN VARIOUS TRACK-TYPE TRACTORS, TRACK-TYPE LOADERS, MOTOR GRADERS, EXCAVATORS, WHEELED EXCAVATORS, WHEEL SKIDDERS, WHEEL LOADERS, INT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR CORE ASSEMBLY AND ENGINE COOLANT TEMPERATURE REGULATOR ON CERTAIN 320D(L) EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE AIR INLET HOSES ON CERTAIN 325D AND 325D L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 129-5844 AND 215-7292 HOSES ASSEMBLIES THAT ARE USED IN THE STABILIZER LINES GROUP ON CERTAIN 416E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING 5I-7523 ENGINE SLEEVES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE LINER SEAL PACKAGED WITH 0R8189, OR8187, OR8777, 0R8778, 10R1501, 10R1502, 10R2138, 10R5480, AND 10R6214 CYLINDER PACKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R0997, 0R1000, 0R1001, 0R1002, 0R1003, 0R1004, 0R1005, AND 0R1006 REMAN WATER PUMPS IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING PISTONS AND PISTON RINGS ON CERTAIN C13 ENGINES INSTALLED IN VARIOUS 345C AND 345D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER OIL SUPPLY TUBE SEAL ON CERTAIN C6.6 INDUSTRIAL ENGINES AND CERTAIN C6.6 ENGINES INSTALLED IN VARIOUS TRACK-TYPE TRACTORS, WHEELED EXCAVATORS, TRACK-TYPE LOADERS, C6.6 OLYMPIAN GENSETS, WHEEL LOA
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN PULLEY (FAN DRIVE) ON CERTAIN 320C, 321CCR, 320D, AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN PULLEY (FAN DRIVE) ON CERTAIN 320C, 321CCR, 320D, AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN PULLEY (FAN DRIVE) ON CERTAIN 320C(L) AND 320D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN PULLEY (FAN DRIVE) ON CERTAIN 320C, 321CCR, 320D, AND 323D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON CERTAIN 345D L EXCAVATORS