318F Excavator Machine Systems Stick - 3.1 m (10.17 ft) Caterpillar


Stick - 3.1 m (10.17 ft)
`


Illustration 1g06018294

Table 1
Specification for 463-8771 Hoe Stick Gp 
Item  Qty  Part  Specification Description 
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores. 
The stick cylinder must be assembled in order to orient the grease zerk, as shown. 
107-9852 Pin As  Diameter is 69.850 ± 0.025 mm (2.7500 ± 0.0010 inch)
4I-4809 Pin As  Diameter is 79.850 ± 0.025 mm (3.1437 ± 0.0010 inch)
166-1495 Lip Type Seal  Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
Install the dust seal so that the lip faces outside, as shown.
Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. 
235-7679 Lip Type Seal  Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed.
Install the dust seal so that the lip faces outside, as shown.
Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. 
229-1096 Bushing(1)  Bore before installation is 70.17 ± 0.04 mm (2.763 ± 0.002 inch).
Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch)
228-5614 Bushing (1)  Bore before installation is 70.17 ± 0.04 mm (2.763 ± 0.002 inch).
Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch)
357-5709 Bushing (1)  Bore before installation is 90.345 ± 0.030 mm (3.5568 ± 0.0012 inch).
Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch)
(1) Install the bushing in the bore so that the part number of the bushing is facing outward.

Information System:

312F and 313F Excavator Machine System Specifications Swing Gear and Bearing
312F and 313F Excavator Machine System Specifications Fuel Tank
318F Excavator Machine Systems Stick - 2.25 m (7.381 ft)
312F and 313F Excavator Machine Systems Electronic Control (Main Pump System)
312F and 313F Excavator Machine Systems Electronic Control (Pilot System)
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Flywheel - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Turbocharger - Remove and Install
320D2 GC Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove and Install
312F and 313F Excavator Machine System Specifications Swing Drive Mounting
318F Excavator Machine Systems Stick - 2.6 m (8.53 ft)
312F and 313F Excavator Machine System Specifications Swing Drive
323F Excavator Hydraulic System Oil Level - Check
323F Excavator Hydraulic System Oil Filter (Return) - Replace
312F and 313F Excavator Machine System Specifications Swivel Lines
323F Excavator Hydraulic System Oil Filter (Pilot) - Replace
320D2 GC Excavator Machine System Specifications Air Conditioner Lines
323F Excavator Hydraulic System Oil Filter (Case Drain) - Replace
323F Excavator Hydraulic System Oil - Change
318F Excavator Machine Systems Stick - 3.1 m (10.17 ft)
312F and 313F Excavator Machine System Specifications Pilot Lines