316F Excavator Machine System Specifications Stick - 3.1 m (10.17 ft) Caterpillar


Stick - 3.1 m (10.17 ft)
`


Illustration 1g06019428
Typical example

Table 1
Specification for 491-3648 Hoe Stick Gp and 463-8769 Hoe Stick Gp 
Item  Qty  Part Number  Specification Description 
All bores must be free of paint. Coat all bores for the pins, the stick, the upper frame, and cylinder pin bores with 5P-0960 Grease Cartridge. 
The stick cylinder must be assembled to orient the grease zerk, as shown. 
107-9852 Pin As  Diameter is 69.850 ± 0.025 mm (2.7500 ± 0.0010 inch)
4I-4811 Pin As  Diameter is 69.850 ± 0.025 mm (2.7500 ± 0.0010 inch)
357-5709 Bushing(1)  Before assembly bore is 90.345 ± 0.030 mm (3.5569 ± 0.0012 inch).
Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch)
229-1096 Bushing(1)  Before assembly bore is 70.17 ± 0.04 mm (2.763 ± 0.002 inch).
Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch)
228-5614 Bushing(1)  Before assembly bore is 70.17 ± 0.04 mm (2.763 ± 0.002 inch).
Installation depth is 9.5 ± 0.8 mm (0.37 ± 0.03 inch)
166-1495 Lip Type Seal  Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seals so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. 
235-7679 Lip Type Seal  Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seals so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. 
(1) Install the bushing in the bore so that the part number is facing outward.

Information System:

312F and 313F Excavator Machine System Specifications Control Valve (Auxiliary)
312F and 313F Excavator Machine System Specifications Air Conditioner Lines
312F and 313F Excavator Machine System Specifications Hydraulic Tank and Filter
325F Excavator Machine Systems Counterweight - Remove and Install
320D2 GC Excavator Machine Systems Fuel Tank - Remove and Install
320D2 GC Excavator Machine Systems Counterweight - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Rocker Shaft - Assemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
300.9D VPS Mini Hydraulic Excavator Machine Systems Fuel Injection Nozzle - Test
An Improved Double Grouser Track Shoe is Now Used On Certain Excavators {4170}
312D2 and 313D2 Excavators Fuses - Replace
320D2 GC Excavator Machine Systems Check Valve (Cooler Bypass) - Remove and Install
320D2 GC Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
320D2 GC Excavator Machine Systems Seat - Remove and Install
320D2 GC Excavator Machine Systems Seat Support - Remove and Install
320D2 GC Excavator Machine Systems Seat Suspension - Remove and Install
320D2 GC Excavator Machine Systems Storage Box and Covers (Cab) - Remove and Install
320D2 GC Excavator Machine Systems Heating and Air Conditioning Unit - Remove and Install
316F Excavator Machine System Specifications Stick Cylinder Lines - Stick Lowering Control Valve
415F2 IL Backhoe Loader Axles, Differentials and Brakes Axle (Front) - Adjust
316F Excavator Machine System Specifications Front Lines
316F Excavator Machine System Specifications Swing Motor