Fuel Tank
`
349D2 MHPU Mobile Hydraulic Power Unit Machine System
[M0065452]
349D2 MHPU Mobile Hydraulic Power Unit Machine System
Swing Motor Lines
349D2 MHPU Mobile Hydraulic Power Unit Machine System
Swing Gear and Bearing
FUEL SYSTEM
TANK GP-FUEL
349D2 MHPU Mobile Hydraulic Power Unit Machine System
Fuel Tank
Show/hide table
| |
| Illustration 1 | g06022832 |
Show/hide table
| Specification for 453-4789 Fuel Tank Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 061-9413 Connector | Before assembly, apply Loctite 5923 to threads. |
| 2 | 1 | 4I-0378 Rubber Gasket | Before assembly, apply blue Loctite 5188 to the flange surface. |
| 3 | 5 | 095-0736 Screw | Torque to |
| 4 | 1 | 3B-0551 Pipe Plug | Before assembly, apply Loctite 5923 to threads. |
| 5 | 1 | 349-7059 Fuel Cap As | Tighten the cap filter kit to |
Information System:
349D2 MHPU Mobile Hydraulic Power Unit Machine System
Swing Motor Lines
GSH420, GSH425, GSH440, GSH520, GSH525, GSH455 and GSH555 Orange Peel Grapples
Rotator Motor and Manifold - Assemble
349D2 MHPU Mobile Hydraulic Power Unit Machine System
Boom Cylinder Lines
GSV520 and GSV525 Orange Peel Grapples
Rotator Motor and Manifold - Disassemble
New Fuel Injection Pump Stop Solenoid is Available on Certain 3054C and C7.1 (Mech) Machine Engines {1251, 1259, 1264}
GSV520 and GSV525 Orange Peel Grapples
Rotator Motor and Manifold - Remove and Install
C9.3 Tier 4 Final Engines
Cylinder Head
C9.3 Tier 4 Final Engines
Fuel Injection Pump
Installing the <NOBR>387-6450</NOBR> Ride Control Kit to a Machine That Does Not Have an ECM {5004}
Installing the <NOBR>387-6451</NOBR> Ride Control Kit to a Machine That Has an ECM {5004}
307E2 Mini Hydraulic Excavator Machine Systems
Refueling Pump - Remove and Install
415F2 Industrial Loader Machine Systems
Fuel Tank - Remove and Install
415F2 Industrial Loader Power Train
Solenoid Valve (Transmission) - Remove and Install
415F2 Industrial Loader Power Train
Transmission (Direct Drive) - Remove
325F Excavator Engine Supplement
Engine - Remove and Install
415F2 Industrial Loader Power Train
Transmission (Direct Drive) - Disassemble
325F Excavator Machine Systems
Fuel Tank - Remove and Install
415F2 Industrial Loader Power Train
Transmission (Direct Drive) - Assemble
330F MHPU Mobile Hydraulic Power Unit
Engine Oil and Filter - Change
415F2 Industrial Loader Power Train
Transmission (Direct Drive) - Install
349D2 MHPU Mobile Hydraulic Power Unit Machine System
Swing Gear and Bearing
Technical Analysis 1 (TA1) Visual Inspection for Generator Sets {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Hydraulic Hammers {0372, 1000, 7000, 753S, 7565}
GSV520 and GSV525 Orange Peel Grapples
Hydraulic Rotator - Remove and Install