CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Air Conditioner Lines Caterpillar


Air Conditioner Lines
`


Illustration 1g06382138

Table 1
Item  Qty  Part  Specification Description 
5P-3928 Refrigerant Coupling Assembly  Installation torque is 62 ± 3 N·m (46 ± 2 lb ft)
9X-7384 O-Ring Seal  Before assembly, apply 397-7507 Oil to air conditioning O- ring seals. 
7K-3176 Refrigerant Coupling Assembly  Installation torque is 49 ± 3 N·m (36 ± 2 lb ft)
9X-7383 O-Ring Seal  Before assembly, apply 397-7507 Oil to air conditioning O- ring seals. 
7K-3304 Jam Nut  Torque to 72 ± 4 N·m (53 ± 3 lb ft) for securing to bulkhead. 
5P-4106 Jam Nut  Torque to 149 ± 8 N·m (110 ± 6 lb ft) for securing to bulkhead. 
9X-7381 O-Ring Seal  Before assembly, apply 397-7507 Oil to air conditioning O- ring seals. 
9X-7380 O-Ring Seal  Before assembly, apply 397-7507 Oil to air conditioning O- ring seals. 
7X-0818 Bolt  Torque to 12 ± 3 N·m (106 ± 27 lb in)
10  9X-7382 O-Ring Seal  Before assembly, apply 397-7507 Oil to air conditioning O- ring seals. 
11  9X-7378 O-Ring Seal  Before assembly, apply 397-7507 Oil to air conditioning O- ring seals. 

Information System:

CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Air Conditioner Lines
340F Excavator Boom/Stick/Bucket Combinations
415F2 Industrial Loader Power Train Tire and Rim (Rear) - Remove and Install
340F Excavator Safety Messages
415F2 Industrial Loader Power Train Tire and Rim (Front) - Remove and Install
415F2 Industrial Loader Power Train Axle Housing (Service Brakes, Differential and Bevel Gear) - Assemble
415F2 Industrial Loader Power Train Axle Housing (Service Brakes, Differential and Bevel Gear) - Disassemble
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Condition Switch (Switch to Ground) - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Solenoid Return - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Sensor Signal (Analog, Passive) - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System ECM Location Code - Test
415IL Backhoe Loader Power Train Axle Housing, Axle Shaft, and Wheel Flange - Install - Rear Axle
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Control Valve
Improved Diesel Oxidation Catalyst (DOC) Is Used On Certain D Series Wheeled Excavators {1091}
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Shipping
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
C9 Engines for Caterpillar Built Machines Cylinder Head Valves
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
349F XE and 352F XE Excavators Engine Oil Level - Check
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Track
323F Excavator Maintenance Interval Schedule
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)