Unit Injector Hydraulic Pump
`
C9 Engines for Caterpillar Built Machines
[SENR9829]
C9 Engines for Caterpillar Built Machines
Cylinder Head Valves
C9 Engines for Caterpillar Built Machines
Crankshaft Seals
FUEL SYSTEM
PUMP GP-FUEL INJECTION
C-9 Engines for Caterpillar Built Machines
Unit Injector
C9 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
C9 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
C9 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
C9 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
Show/hide table
![]() | |
Illustration 1 | g06025013 |
Show/hide table
Specification for 319-0675 Unit Injector Hydraulic Pump Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 4 | 228-5897 Bolt | Torque to |
2 | 3 | 313-4620 Screw | Torque to |
3 | - | - | Torque for the fitting for the fuel inlet port is |
4 | - | - | Torque for the fitting for the fuel outlet port is |
Show/hide table
![]() | |
Illustration 2 | g06025026 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
5 | 1 | 8C-6711 Retainer Nut | Torque to |
6 | 1 | 5C-2890 Nut | Torque to |
A | - | - | Installation depth for the needle bearing assembly in the barrel is |
7 | 1 | 1N-8062 Needle Bearing As | Install bearing so that the end of the bearing with the identification number is oriented as shown in illustration . |
Show/hide table
![]() | |
Illustration 3 | g06025033 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
8 | 1 | 153-7036 Spool | Install the spool until the spool is fully seated against the shoulder of the block. |
Information System:
C9 Engines for Caterpillar Built Machines
Cylinder Head Valves
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Shipping
Improved Diesel Oxidation Catalyst (DOC) Is Used On Certain D Series Wheeled Excavators {1091}
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Control Valve
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Air Conditioner Lines
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Air Conditioner Lines
340F Excavator
Boom/Stick/Bucket Combinations
415F2 Industrial Loader Power Train
Tire and Rim (Rear) - Remove and Install
340F Excavator
Safety Messages
415F2 Industrial Loader Power Train
Tire and Rim (Front) - Remove and Install
415F2 Industrial Loader Power Train
Axle Housing (Service Brakes, Differential and Bevel Gear) - Assemble
349F XE and 352F XE Excavators
Engine Oil Level - Check
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Track
323F Excavator
Maintenance Interval Schedule
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Idlers (Track)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Piston Motor (Propel)
An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380}
Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301}
Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117}
A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502}
307E2 Mini Hydraulic Excavator Machine Systems
Main Control Valve - Assemble