Track
`
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
[UENR6291]
UNDERCARRIAGE
TRACK GP
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Track
Show/hide table
| |
| Illustration 1 | g02725196 |
Show/hide table
| Specification for 383-4238 Track Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| - | - | - | All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. |
| Use the following procedure to tighten the track bolts: | |||
| 1. Tighten the track bolts to |
|||
| 2. Tighten the standard track bolts to an extra turn of 120 ± 5 degrees. | |||
| 3. Tighten the master link bolts to an extra turn of 180 ± 5 degrees. | |||
| - | - | - | The maximum assembly force for the track link assembly is |
| - | - | - | The reference setting force is |
| A | - | - | Distance between the bolt holes is |
| B | - | - | Distance between the bolt holes is |
| C | - | - | Distance between the bolt holes is |
| D | - | - | Distance between the bolt holes is |
| E | - | - | Protrusion at one end of the pin is |
Show/hide table
| |
| Illustration 2 | g02725198 |
|
View of area F | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| G | - | - | Distance from the end of the plug (1) to the surface of the stopper (2) is |
| H | - | - | Distance from the end of the pin (3) to the surface of the stopper (2) is |
| - | - | - | The plug (1) must not be recessed below the surface of the stopper (2) after assembly. |
| End play for the link assemblies is |
Information System:
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
349F XE and 352F XE Excavators
Engine Oil Level - Check
C9 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
C9 Engines for Caterpillar Built Machines
Cylinder Head Valves
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders
Shipping
Improved Diesel Oxidation Catalyst (DOC) Is Used On Certain D Series Wheeled Excavators {1091}
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Control Valve
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Air Conditioner Lines
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems
Air Conditioner Lines
340F Excavator
Boom/Stick/Bucket Combinations
415F2 Industrial Loader Power Train
Tire and Rim (Rear) - Remove and Install
323F Excavator
Maintenance Interval Schedule
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Idlers (Track)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train
Piston Motor (Propel)
An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380}
Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301}
Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117}
A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502}
307E2 Mini Hydraulic Excavator Machine Systems
Main Control Valve - Assemble
C9 Engines for Caterpillar Built Machines
Crankshaft Seals
349D2 MHPU Mobile Hydraulic Power Unit Machine System
Upper Frame - Soilmec
349D2 MHPU Mobile Hydraulic Power Unit Machine System
Upper Frame - Standard