PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel) Caterpillar


Piston Motor (Propel)
`
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train [UENR6291]
HYDRAULIC SYSTEM
MOTOR GP
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)


Illustration 1g06025543


Illustration 2g06025548
Detailed view of area A

Table 1
Specification for 382-5359 Piston Motor Gp 
Item  Qty  Part  Specification Description 
246-7411 Spring  Free length of the spring is 19.0 mm (0.75 inch)


Illustration 3g06025553
Detailed view of area B

Table 2
Item  Qty  Part  Specification Description 
141-0269 Threaded Pin  Installation torque is 14 N·m (124 lb in)


Illustration 4g06025555
Detailed view of area C

Table 3
Item  Qty  Part  Specification Description 
As required use the following shims: 
1 209-9964 Shim  Thickness is 2.15 mm (0.085 inch)
1 209-9965 Shim  Thickness is 2.20 mm (0.087 inch)
1 209-9966 Shim  Thickness is 2.25 mm (0.089 inch)
1 209-9967 Shim  Thickness is 2.30 mm (0.091 inch)
1 209-9971 Shim  Thickness is 2.50 mm (0.098 inch)
252-0705 Screw  Torque to 4.7 N·m (41.6 lb in)
180-1279 Spacer  Thickness is 3.50 mm (0.138 inch)
1 180-1278 Spacer  Thickness is 3.60 mm (0.142 inch)
1 180-1277 Spacer  Thickness is 3.70 mm (0.146 inch)
1 180-1274 Spacer  Thickness is 3.80 mm (0.150 inch)
1 180-1275 Spacer  Thickness is 3.90 mm (0.154 inch)
1 180-1276 Spacer  Thickness is 4.00 mm (0.158 inch)

Information System:

PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
323F Excavator Maintenance Interval Schedule
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Track
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
349F XE and 352F XE Excavators Engine Oil Level - Check
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
C9 Engines for Caterpillar Built Machines Cylinder Head Valves
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Shipping
Improved Diesel Oxidation Catalyst (DOC) Is Used On Certain D Series Wheeled Excavators {1091}
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Control Valve
CB7, CB8 and CB10 Vibratory Asphalt Compactors Machine Systems Air Conditioner Lines
An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380}
Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301}
Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117}
A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502}
307E2 Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
C9 Engines for Caterpillar Built Machines Crankshaft Seals
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Soilmec
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Standard
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Pump