PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank Caterpillar


Fuel Tank
`


Illustration 1g06358372

Table 1
Item  Qty  Part  Specification Description 
18  8T-4189 Bolt  Tighten the bolts to 4 ± 1 N·m (35 ± 9 lb in) in star pattern. Again tighten the bolts in star pattern to 4 ± 1 N·m (35 ± 9 lb in).
Finally tighten bolts to 8.0 ± 0.5 N·m (70.8 ± 4.4 lb in)
8T-0289 Bolt  Tighten the bolts to 1.70 ± 0.25 N·m (15.05 ± 2.21 lb in) in star pattern. Again tighten the bolts in star pattern to 1.70 ± 0.25 N·m (15.05 ± 2.21 lb in).
Finally tighten the bolts to 3.5 ± 0.5 N·m (31.0 ± 4.4 lb in).
Determine the index hole on gasket (2) and align with index mark on tank. Do not force bolts through holes in gasket. 
8T-0352 Bolt  Tighten the bolts to 1.70 ± 0.25 N·m (15.05 ± 2.21 lb in) in star pattern. Again tighten the bolts in star pattern to 1.70 ± 0.25 N·m (15.05 ± 2.21 lb in).
Finally tighten the bolts to 3.5 ± 0.5 N·m (31.0 ± 4.4 lb in).
Determine the index hole on gasket (2) and align with index mark on tank. Do not force bolts through holes in gasket. 
148-8364 Elbow As  Torque to 15 ± 4 N·m (133 ± 35 lb in)
350-7735 Cap Filter Kit  Torque to 0.6 to 1.0 N·m (5.3 to 8.9 lb in)
306-8127 Adapter  Torque to 20 to 40 N·m (177 to 354 lb in)
164-5616 Plug As  Torque to 18 ± 4 N·m (159 ± 35 lb in)
399-2420 Plug As  Torque to 18 ± 4 N·m (159 ± 35 lb in)
10  165-2273 Shutoff Valve Gp  Orientate valve outlet 90 ± 5 degrees down from horizontal. 

Information System:

349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Standard
349D2 MHPU Mobile Hydraulic Power Unit Machine System Upper Frame - Soilmec
C9 Engines for Caterpillar Built Machines Crankshaft Seals
307E2 Mini Hydraulic Excavator Machine Systems Main Control Valve - Assemble
A Procedure to Install Quick Coupler Hydraulic Line Mounting Brackets on Certain 307E2 Mini Hydraulic Excavators is Now Available {6502}
Installation Procedure for Auxiliary Relief Valves on Certain 308E2 CR Mini Hydraulic Excavators with an Updated Main Control Valve {5069, 5117}
Improved Electrical Grounding is Now Used on Certain 308E2 CR Mini Hydraulic Excavators {1408, 7301}
Inspection and Rework Procedure for Swing Bearing Bolted Joint on Certain 305.5E and 306E Mini Hydraulic Excavators {7063}
An Improved Radiator is Now Used for Certain 300.9D, 301.4C, 302.7D CR Mini Hydraulic Excavators {1353, 1380}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Piston Motor (Propel)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
323F Excavator Maintenance Interval Schedule
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Conveyor Swing)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Pump
An Improved Window Position Switch is Now Used on Certain Excavators {7310}
538, 548 and 558 Forest Machine Connector Contact Description
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fuel Tank
Technical Analysis 1 (TA1) Visual Inspection for Wheeled Excavator {0372, 1000, 7000, 753S, 7565}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Mounting Bracket - Control
415F2 Backhoe Loaders Hydraulic and Steering System Service Brake Control
New Cat Grade Control / Cat Production Measurement Software is Now Available on Certain 336F XE and 349F XE Excavators {7494, 7610, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor) - Motor